Horizontalni vrtalni stroj

TOS VARNSDORF W 100 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Premer vretena: 100 mm Miza: 1250x1250 mm Prečni pomik: 1600 mm Leto izdelave: 1982 Pedpfxoxz Dqaj Agpord

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.400 mm, premer vretena: 100 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is in good technical condition, currently disconnected. Equipped with a Heidenhain TNC 530i control system, chip conveyor, and a 40-position tool magazine. Prsdpfx Agev Upbnepjd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 130 kg, širina na sredini: 600 mm, premer brusilnega koluta: 450 mm, skupna širina: 2.110 mm, skupna dolžina: 3.120 mm, skupna višina: 1.435 mm, premer brušenja: 350 mm, poteza s peresom: 30 mm, širina brusilnega kolesa: 50 mm, hitrost vretena za brušenje: 2.000 obr/min, skupna masa: 3.100 kg, Max. grinding diameter: Ø350 mm Max. workpiece weight: 130 kg Grinding length between centers: 600 mm Grinding spindle speed: 1,500 or 2,000 rpm (Manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120-liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic power unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange extractor - Dressing holder with dressing diamond on tailstock - 2 dead centers - Dial gauge for table adjustment to 0° - Machine lamp - 3 detachable crane transport hooks - Leveling screws with base plates Prsdec Tnq Ijpfx Agpsd - Machine documentation Including the following special accessories: - Internal grinding device - Frequency inverter (Mitsubishi) for speed control at the work spindle - Frequency inverter for speed control at the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780

Stanje: rabljeno, Leto izdelave: 1953, Turning length / mm Swing diameter over the table // mm Faceplate diameter / mm Pjdpfeua Iw Tox Agpsrd Faceplate diameter: approx. 3600 mm Centre height over the table: approx. 1500 mm Swing diameter over table: 2600 mm Swing diameter in pit: 3600 mm Swing diameter over bed: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at faceplate: 5000 mkg Faceplate ring gear pitch diameter: 1900 mm Main spindle bore: 120 mm Speed range normal: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Total weight: approx. 42.5 tonnes

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Surface grinding machine Brand: Jakobsen Model: 1432 Year: 1990 Pjdpfjiv S Avsx Agpsrd RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Heidenhain ND 221B digital readout. Selter electronic magnetic table 800x350 mm with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007. Includes sets of grinding wheels (see photographs).

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Predpfxjfg E Hps Agpjd Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Urpe slotting machine model M-300 G with tilting head, slotting machine with a stroke of 0-300mm, number of strokes per minute: 30-35-40, distance from the tool to the column: 500mm, adjustable distance from table to ram: 425-585mm, maximum distance between the tool and the body: 450mm, table surface: 800x325mm, longitudinal table travel: 550mm, cross travel: 265mm, motor power: 5.5 HP, estimated weight: 1850kg, equipped with universal chuck. Predpfx Agovdknzepsd

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light Prodsn Arm Topfx Agpjd

Stanje: novo, Discover our selection of robust and precise conventional lathes Are you looking for a reliable lathe to boost your productivity? Experience precision and performance with our new range of conventional lathes, complete with extensive accessories. Our machines offer turning diameters from 400–1000 mm and turning lengths up to 10 metres, and are also available as cycle-controlled variants. With various models, you have limitless possibilities. Many machines are in stock and available at short notice! Explore our comprehensive range of special accessories, such as hollow spindles, infinitely variable spindle speeds, Siemens controls, and much more—making your lathe even more versatile. Whether for complex workpieces or demanding applications, our machines always provide the best results. Rely on our many years of experience and let’s optimise your machining processes together. Invest in quality and precision—contact us today! Here is a selection of STOCK MACHINES (see images); on request, we are happy to offer other models or custom-built machines: TECHNICAL SPECIFICATIONS: DLZ Series including BAFA subsidy of 15% and more! Pedpsd Afn Ijfx Agpord Swing over bed: 400–1000 mm Turning length: 1000/1500/2000/3000 mm Spindle bore: 80 (optionally 105) mm Workpiece weight up to 2 t Spindle speed up to 2800 rpm ACCESSORIES: Digital readout, 3-jaw chuck, faceplate, Multifix toolholder, and much more. Extensive SPECIAL ACCESSORIES such as stepless spindle speed, steady rests, larger spindle bores, etc. to make the machine even more productive: CURRENTLY AVAILABLE NEW MACHINES with warranty and BAFA subsidy, e.g. - SDM 850: swing over bed 850 mm, turning length 3 m - DLZ 325: swing over bed 650 mm, turning length 2 and 3 m - DLZ 250: swing over bed 500 mm, turning length 1 and 1.5 m - DLZ 200: swing over bed 400 mm, turning length Further models (including cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our services for you: • Consultation and solutions directly at your site • Organisation of transport for your machine to your facility • Delivery, installation, commissioning, and handover ready for operation • Financing and review of grant opportunities through KFW and BAFA, among others.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 300 kg, skupna širina: 1.260 mm, skupna dolžina: 1.500 mm, Universal dynamic balancing machine for rotors from 3 to 300 kg. Equipped with CAB803 measuring system, class C safety guard, CE marked. Prjdpou Nmppjfx Agpjd