Balanser

SCHENCK HM3BU

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders Csdpfx Afewq Rpwoqehf 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm Codpow Ey R Hofx Afqjhf GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLAJENJE: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, potovalna razdalja osi X: 1.650 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, obremenitev mize: 3.500 kg, 3-axis Mitutoyo digital readout Table: 2000 x 700 mm Travel (X/Y/Z): 1650 x 1000 x 1000 mm Automatic lubrication Spindle: ISO 40 taper, maximum spindle speed 2066 rpm Cjdpfewxyzfsx Afqshf Weight: 7500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes Cedort Ip Nopfx Afqohf 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 780 mm, premer struženja: 270 mm, moč vretenovega motorja: 15 W, potovalna razdalja osi X: 195 mm, pomik osi Y: 120 mm, pomik po osi Z: 780 mm, CNC Lathe Nakamura-Tome WT-300 Year of manufacture: 2006 CNC Control: FANUC Series 18i-TB Machine weight: 12,000 kg Machine dimensions: Length: 5,230 mm Width: 2,500 mm Height: 2,300 mm Machining capacity: Max swing diameter on upper/lower turret: Ø 310 mm (both upper and lower) Distance between spindles (min - max): 120 mm – 1,200 mm Max turning diameter main spindle / sub-spindle: Ø 270 mm Max turning length: 780 mm Bar capacity main spindle / sub-spindle: Ø 65 mm Axis travels: Axis X1 / X2: 195 mm Axis Y: 120 mm (±60 mm) Axis Z1 / Z2: 780 mm Axis B: 850 mm Axis C: 360° (continuous) Main spindle and sub-spindle: Spindle speed: 50 – 4,500 rpm Spindle nose: ASA A2-6 Chuck diameter: Ø 225 mm Minimum programmable C-axis increment: 0.001° Spindle motor power (cont./30 min): 11/15 kW (both spindles) Turret No.1 & No.2 (identical): Tool positions (static / driven): 24 positions (12 driven) Driven tool speed: 3,600 rpm Driven tool motor power: 3.7 / 5.5 kW Turning / boring tool dimensions: 25×25 mm / Ø 32 mm Rapid traverses: Axis X1 / X2 / Y: 16,000 mm/min Axis Z1 / Z2: 24,000 mm/min Axis B: 36,000 mm/min Axis C: 100 rpm Axis B: 27,000 mm/min Chedpfx Afowx Hicsqef Included accessories: LNS MOVE bar feeder (2,300 mm length capacity) Chip conveyor Coolant collection tank with wash pump High-pressure pump with external coolant tank Various fixed and driven toolholders Tool presetting arm with dual RENISHAW probe heads Part unloading arm Manuals, electrical diagrams and CE Declaration

Stanje: novo, skupna višina: 3.500 mm, skupna dolžina: 7.000 mm, skupna širina: 4.000 mm, volumenski pretok: 26.000 m³/h, trajanje garancije: 12 meseci, notranja višina: 2.700 mm, notranja dolžina: 6.900 mm, notranja širina: 3.900 mm, delovna višina: 2.700 mm, Oprema: dokumentacija / priročnik, kabina, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top service – Fast delivery – Reliable support ⚡ ✈️ Plus shipping costs – Shipping available on request ⏰ 48H EXPRESS DELIVERY available after down payment! Standard delivery time varies depending on stock between 1 business day and approximately 15 weeks. 🔧 Please note: Additional options may extend the delivery time. 📩 Please contact the seller in advance to check if your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest smart! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard cabin sizes are usually in stock and available at short notice. 📌 If you require larger painting areas, we can combine standard cabins modularly to create custom solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 High-end wet paint booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow across a full-surface ceiling supply plenum – for even, dust-free painting 🚪 3-leaf main gate with viewing windows + service door with emergency locking for overpressure 💡 Shadow-free, heat-resistant, and compliant lighting ♻️ Recirculation system with controllable fresh air damper – rapid heating to 60–80 °C in 8–15 min 🔇 Low-noise high-performance fans with constant airflow (0.30 m/s) 🛡️ Light overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 High-end filtration technology: ✅ Prefilter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full management of ventilation, heating, lighting, and safety – easy and compliant 🖲️ Optional touchscreen operation available 🧱 Flexible air handling units – can be installed on the right, left, or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic gates – fully glazed 🧱 Roof with additional insulation 🎨 Integrated paint mixing station 🌈 Color selection: Any RAL color possible (Standard: blue, white, orange, red, grey) 💡 Explosion-proof lighting (Ex-proof) 🌪️ Explosion-proof fan (Ex-proof) 🖥️ Touchscreen control ⚠️ Selection of special equipment may extend the delivery time. Please coordinate your options in advance with our sales team. Chedpjipvulsfx Afqof 🚧 Installation costs are not included in the price. 📍 These depend on your location – we are happy to provide an individual quote! ☀️ 2-YEAR WARRANTY – Safety first! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional paint shop technology with over 40 years of experience.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Codpfx Afjfg E Hpoqjhf Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Csdpfslbmupox Afqjhf

Stanje: dober (rabljeno),

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator Chedpfxofg E Hls Afqef • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice