CNC stružnica

HWACHEON T2-2T YSMC

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 15 [kW] - Spindle speed: 5000 [rpm] - Max. bar diameter: 65 [mm] - Max. main chuck diameter: 210 [mm] - Minimum C-axis resolution: 0.001 [degree] SUB SPINDLE - Spindle nose: A2-6 - Spindle drive power: 15 [kW] - Spindle speed: 5000 [rpm] - Max. bar diameter: 65 [mm] - Max. main chuck diameter: 210 [mm] - Minimum C-axis resolution: 0.001 [degree] - Travel distance: 550 [mm] RIGHT UPPER TURRET HEAD - Number of stations: 12 - Number of driven stations: 12 - Travel X/Z: 245 x 520 [mm] - Travel Y: +/- 50 [mm] - Driven tools speed: 6000 [rpm] - Driven tools power: 7.5 [kW] LEFT LOWER TURRET HEAD - Number of stations: 12 - Number of driven stations: 12 - Travel X/Z: 210 x 520 [mm] - Travel Y: +/- 50 [mm] - Driven tools speed: 6000 [rpm] - Driven tools power: 7.5 [kW] ELECTRICAL SUPPLY - Total connected load: 85 [kVA] WEIGHT AND DIMENSIONS - Footprint: 5000 x 3500 [mm] - Machine height: 2500 [mm] - Machine weight: 9500 [kg] MACHINE HOURS - Operating hours: 5811 [h] ACCESSORIES - Control: Fanuc 31i-Model A - Electronic handwheel - 3-color status light - Coolant tank * with high-pressure pump: 2 x 15 [bar] * with coolant chiller - Chip conveyor: Right side - Part ejector - Parts belt conveyor Gbodpfjv R Hwfox Anfol - Bar feeder: IRCO SIMAG 70.1 - Tool probe system - Number of driven tool holders: Radial tool holder x3 / Axial tool holder x2 - Number of static tool holders: See photo - Collet chuck: 2 x HAINBUCH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, proizvajalec krmilnikov: HAAS, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, število osi: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, a Y-axis travel of 406 mm, and a Z-axis travel of 508 mm. The machine is equipped with a side-mounted tool changer with capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3-phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short-circuit capacity: 10,000 A • Software version: 100.19.000.1123 Gbedpfeywv Tnex Anfsl • Power-on hours: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, washdown gun, LED work light, fully enclosed work area • Condition: very good condition, low operating hours, well-maintained Additional Equipment • Machine vice • Probe Technical Specification Taper Size SK 40

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Gbedpfoh Rdwxox Anfsl Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW Gbsdpfxeuhaw Io Anfsl - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel distance Z: 120 mm - Spindle speed: 7,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOL POST - Number of positions: 3 BACK MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Installation space required: 1500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control: Fanuc - 3-color status light - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 5.327 h, potovalna razdalja osi X: 762 mm, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ta 3-osna vertikalna obdelovalna centra HAAS VF-2SS je bila izdelana leta 2014. Opremljena je z naprednimi funkcijami, kot so merjenje orodja in merilna tipala za večjo natančnost. S 5.327 urami rezanja je to vertikalno obdelovalno središče zasnovano za učinkovite delovne procese. Če iščete visoko kakovostne obdelovalne možnosti, upoštevajte stroj HAAS VF-2SS, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Notranje hlajenje orodja (IKZ) • Merilna tipala • Merjenje orodja • Konfiguracija osi: 3 osi (X/Y/Z) • Frekvenca: 50 / 60 Hz • Izklopna zmogljivost kratkega stika: 10.000 A • Tok kratkega stika: 5.000 A RMS simetrično • Ocena obloka: Gsdpfjyux Saex Anfsbl • 208-240 VAC modeli: HRC-1 • 360-480 VAC modeli: HRC-2 • Čas rezanja: 5327 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Gbsdpfx Ajxzq Nconfjl Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: zelo dobro (rabljeno), Manufacturer: HEYLIGENSTAEDT Model: NDC 710 / 1800 Control: R&D MTC3 4-jaw chuck 1400 mm Steady rests: 3 pcs, capacity Ø 100–1050 mm Roller steady: 2 pcs, open type, capacity Ø 1120 mm KNOLL chip conveyor, year 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm Turning length: 8250 mm Swing over bed Ø: 1400 mm Gbsdpfowzh A Asx Anfsl Swing over cross slide Ø: 1120 mm Spindle power: 100 kW Workpiece weight: 16,000 kg Length: 14,000 mm Width: 3,500 mm Height: 2,900 mm Weight: 32,000 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Rabljeni stružni stroj OKUMA - Model: LT200-M TwinStar - Letnik: 2007 - vključuje transporter za ostružke - posoda za hladilno tekočino - takoj na voljo Gedpfx Aov S Svvonfebl

Stanje: dober (rabljeno), Leto izdelave: 2000, Ram stroke – max. 2 – 300 mm Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 rpm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Space requirement approx. 2.5 x 1.5 x 2.2 m The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of cutting speed with constant return speed, even during machining Godouayibepfx Anfebl - Easy clamping of workpieces using standard clamping devices, no additional tooling required - Highest dimensional accuracy due to self-centering, centrally positioned tool holder - Feed rate can be changed during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable

Stanje: rabljeno, Leto izdelave: 2015, X/Y/Z - 350/550/510 mm Velikost mize: 500 mm premera Vretenasti konus: SK 40 A-os: +30°/-120° C-os: 360° Največja obremenitev mize: 300 kg Vretenaste vrtljaje: 18.000 min⁻¹ Notranje visokotlačno hlajenje skozi vreteno: 35 bar Število postaj v izmenjevalcu orodij: 40 Krmilje: Gbedpsywi Dtjfx Anfel Siemens Sinumerik 840 D SL Opremljen z: Renishaw RMP 600 Transporter za ostružke