TORNOS DECO 10

TORNOS DECO 10

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Stroke: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1500 kg Cjdpfx Asy Aprnohxegt EQUIPMENT - CNC control: Fanuc - Driven tool motorization on: S2, S3, S5 - Powered guide bush - Parts ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Cedpfjk Sat Djx Ahxogt +++++

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg Cjdpfoy Aprhsx Ahxegt EQUIPMENT - CNC Control: Fanuc - Driven tools powered on: S2, S3, S5 - Powered guide bushing - Part ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 Csdpsy Aprbofx Ahxegt - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1,500 kg EQUIPMENT - Control: Fanuc - Driven tool motorisation at: S2, S3, S5 - Driven guide bushing - Parts catcher - Coolant tank - Bar feeder: LNS TRYTON

Stanje: dober (rabljeno), Leto izdelave: 1975, Največji premer kolesa: 630 mm y-pomik: 560 mm Širina kolesa: 180 mm Največji modul: 8 Najmanjši modul: 1 Premer obdelovanca: 750 mm Premer mize: 450 mm Premer vpenjalnega trna: 58 mm Hod vretena: 200 mm Nastavljivost: 230 mm Razdalja med vretenom in mizo: 225–450 mm Vpenjalni stožec Morse 4 Poglobitveni pomik: 0,03 mm/hod Ovitkovni pomik 10n: 0,18–0,74 mm/hod Csdpfx Ahsyb Sx Toxsgt Število hodov 12n: 47–300 hodov/min Električna izvedba – napetost/frekvenca: 380/50 V/Hz Teža stroja pribl.: 5.500 kg Stroj je bil zvišan za 100 mm

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo so trije konstrukcijsko podobni, a ne identični CNC avtomatski stružni stroji Tornos, vključno z magazini za podajanje palic LNS. 1) Stružnica, osi: 9, vretena: 2, največji premer palice: 10 mm (ena le 7 mm), hitrost vrtenja: 16.000 obr./min, hod: 66 mm, mere stroja X/Y/Z: pribl. 1700 mm / 1050 mm / 2000 mm, teža: pribl. 1500 kg, krmiljenje: Fanuc. 2) Magazin za podajanje palic, razpon premera palic: 1 mm–12 mm, zmogljivost polnjenja: 7 mm/10 mm: 36/24. Na voljo je dokumentacija. Možen je ogled na lokaciji. Posamična prodaja stružnice z ustreznim podajalnikom po dogovoru možna. Codjyypmyspfx Ahxjgt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Premer palice (maks.): 10 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, število osi: 9, Swiss lathe from 2006. This TORNOS DECO 10a is equipped with an automatic, integrated bar feeder with a maximum bar length of 3.2 m and bar capacity of 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, the TORNOS DECO 10a we offer for sale is worth considering. Contact us for more details. • Overhauled in 2016: • Machine, ball screws (replaced if necessary), guideways, guide bushes, main and counter spindles checked Cgsdpfxsytcalj Ahxot • Complete cleaning • Preventive maintenance according to Block 3 carried out • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points set • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent sub-spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Tool breakage detection sensor Additional Equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar diameter: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRID 10+5" drum with: • 14 guide holes for 1-4 mm • 14 guide holes for 4.1-10 mm • Drum loading magazine • Integrated 25-litre hydraulic unit with filter • Front and rear support legs, center height 1,100 mm • Electrical cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Counter Spindle: Yes

Stanje: rabljeno, Technical Details: Welding Current: 500 A Machine Weight approx.: 129 kg Dimensions (L x W x H): 1.1 x 0.7 x 1.2 m Control: Display for welding current with 2/4-step switch, pulse function, stepless adjustment Cooling system: water-cooled with antifreeze Shielding gas: solenoid valve (without pressure regulator) Torch package with 3.0 m length Csdpfxswtctmo Ahxogt Torch head: gas-cooled Ground clamp with 2.5 m ground cable Wire feed: 4-roll drive for wire Ø 1.0/1.2mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Premer palice (maks.): 7 mm, število osi: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent sub-spindle, and a swiveling workpiece holder. It is equipped with a bar feeder with a drum and a lubrication unit for the guide bushings. If you are looking for a high-quality lathe, you should consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool stations T11-T24 with vertical and horizontal motion • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle Cgodpfx Aeyr Nflohxot • Lubrication unit for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor speed n = 12,000 rpm Additional equipment • Bar loader with drum (bar feeder) • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Thread cutting unit for ESX 12 collet • Front and rear support stand, center height 1100 mm Technical Specification Counter Spindle: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine is equipped with a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operation. Ideal for complex Swiss-type turning operations. Contact us for further information about this machine. 2 similar machines available! Additional Information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front and rear support foot Cgjdpsx D Dliofx Ahxot • “HYBRID 10+5” drum with 14 guide holes for 1-4 mm bars and 14 guide holes for bars 4.1-10 mm; up to 8 mm bar diameter without bar preparation • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Comprehensive set of measuring instruments

Stanje: dober (rabljeno), Shielded gas welding machine with pulse function, pulse-arc welding unit, MIG/MAG-pulse welding system -includes: 3 torch packages (1x aluminium, 1x stainless steel, 1x steel) -maximum welding output: 330 A -features: remote control connection, detachable wire feeder, incl. earth cable, gas regulator Cgedpfx Ahjd I U Dwoxot -wire feeder: 4-roller drive -cooling: water-cooled -dimensions: 655/900/H1490 mm -weight: 160 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, direction-dependent spindle stop, and cross slides with tool holders. It is equipped with an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also includes a bar loader, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality turning machine, you should consider the TORNOS DECO 10a we have for sale. Contact us for more information. Additional Information • Cross slides with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Movable headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • Thread cutting device for collet chucks ESX 12 • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive measuring device package Cgodox D Dmtopfx Ahxet Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2003. It features a sliding headstock, a direction-dependent spindle stop, and multiple cross slides with tool holders for versatile machining. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning operations. The machine is equipped with interfaces for bar feeders and tool breakage detection. Further information about this machine is available upon request. Additional Information • Programming software TB-DBCO version 6: Single-station product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Sliding headstock: S1/Z1 axis, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming steps of 0.1 degrees) • Cross slides: • 1 cross slide with 4 tool stations (axes X1 and Y1) Cgjdpfx Ahjx D Dm Hexot • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent units for rapid positioning • Counter spindle: independent (S4), n = 12,000 rpm, collet F13 • Cross slide support options: • Presettable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation: right-hand direction • S2 motorization (electrical/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling, milling, and threading attachment for collet BSX 12 • Sensor: Tool breakage monitoring with type MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic controls • Interface: Adaptation for LNS bar feeder • Spindle speed: n = 16,000 rpm indicates a machine with moderate spindle speed capacity • Additional equipment: Comprehensive package of measuring devices Technical Specification Counter Spindle: Yes

Stanje: rabljeno, Leto izdelave: 1990, X-travel: 500 mm Y-travel: 400 mm Z-travel: 400 mm Table size: 680 x 380 mm CNC control: 432 PHILIPS Feed range: 1–3000 mm/min Rapid traverse: 6 m/min Tool holder: ISO 40 Speed range: 20 – 3150 rpm Main drive: DC 5 kW Milling head swivels: + / - 90° Total power requirement: 12 kW Machine weight approx.: 1.2 t Space requirement approx.: 2.5 x 2 x 2 m Cgsdpfsu Rt Nrjx Ahxot CNC tool milling machine with 432 control.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader Cgsdpfex D D Ikox Ahxet • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes