TORNOS DECO 10a

TORNOS DECO 10a

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Premer palice (maks.): 7 mm, število osi: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent sub-spindle, and a swiveling workpiece holder. It is equipped with a bar feeder with a drum and a lubrication unit for the guide bushings. If you are looking for a high-quality lathe, you should consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool stations T11-T24 with vertical and horizontal motion • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication unit for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor speed n = 12,000 rpm Additional equipment • Bar loader with drum (bar feeder) • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Thread cutting unit for ESX 12 collet • Front and rear support stand, center height 1100 mm Technical Specification Counter Spindle: No Ffodpfx Abeyr Nflevsw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine is equipped with a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operation. Ideal for complex Swiss-type turning operations. Contact us for further information about this machine. Fodpfxex D Dlio Abvofw 2 similar machines available! Additional Information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front and rear support foot • “HYBRID 10+5” drum with 14 guide holes for 1-4 mm bars and 14 guide holes for bars 4.1-10 mm; up to 8 mm bar diameter without bar preparation • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Comprehensive set of measuring instruments

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2003. It features a sliding headstock, a direction-dependent spindle stop, and multiple cross slides with tool holders for versatile machining. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning operations. The machine is equipped with interfaces for bar feeders and tool breakage detection. Further information about this machine is available upon request. Additional Information • Programming software TB-DBCO version 6: Single-station product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Sliding headstock: S1/Z1 axis, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming steps of 0.1 degrees) • Cross slides: • 1 cross slide with 4 tool stations (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent units for rapid positioning • Counter spindle: independent (S4), n = 12,000 rpm, collet F13 • Cross slide support options: • Presettable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation: right-hand direction • S2 motorization (electrical/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling, milling, and threading attachment for collet BSX 12 • Sensor: Tool breakage monitoring with type MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic controls Fsdpfx Ajx D Dm Hjbvefw • Interface: Adaptation for LNS bar feeder • Spindle speed: n = 16,000 rpm indicates a machine with moderate spindle speed capacity • Additional equipment: Comprehensive package of measuring devices Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, direction-dependent spindle stop, and cross slides with tool holders. It is equipped with an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also includes a bar loader, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality turning machine, you should consider the TORNOS DECO 10a we have for sale. Contact us for more information. Additional Information • Cross slides with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Movable headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle Ffsdpfx Abex D Dmtsvow • Lubrication device for guide bush with filter • Thread cutting device for collet chucks ESX 12 • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, največja hitrost vretena: 12.000 obr/min, Premer palice (maks.): 10 mm, število osi: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in the year 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication unit, and a drum-type bar loader. It comes with a 'HYBRIDE 10+5' drum for bars up to 10 mm and an integrated hydraulic unit. Please contact us for more information about this machine. Additional Information: • Electrical control cabinet • Motor voltage: 400 V Fodpfx Absx D Dmyovefw • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool stations T11-T24, offering both vertical and horizontal movement • Swiveling workpiece holder on the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required for bars up to 8 mm • Independent counter spindle • Thread-cutting device for collet ESX 12 • Guide bushing lubrication unit with filter • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive package of measuring instruments Technical Specification: Counter Spindle: Yes