TORNOS DECO 10a

TORNOS Deco 10a

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Premer palice (maks.): 10 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, število osi: 9, Swiss lathe from 2006. This TORNOS DECO 10a is equipped with an automatic, integrated bar feeder with a maximum bar length of 3.2 m and bar capacity of 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, the TORNOS DECO 10a we offer for sale is worth considering. Contact us for more details. • Overhauled in 2016: • Machine, ball screws (replaced if necessary), guideways, guide bushes, main and counter spindles checked • Complete cleaning • Preventive maintenance according to Block 3 carried out • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points set • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent sub-spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Tool breakage detection sensor Additional Equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar diameter: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRID 10+5" drum with: • 14 guide holes for 1-4 mm • 14 guide holes for 4.1-10 mm • Drum loading magazine • Integrated 25-litre hydraulic unit with filter Ffsdpfxeytcalj Abvsw • Front and rear support legs, center height 1,100 mm • Electrical cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine is equipped with a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operation. Ideal for complex Swiss-type turning operations. Contact us for further information about this machine. 2 similar machines available! Additional Information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front and rear support foot • “HYBRID 10+5” drum with 14 guide holes for 1-4 mm bars and 14 guide holes for bars 4.1-10 mm; up to 8 mm bar diameter without bar preparation Ffodpfox D Dlijx Abvew • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Comprehensive set of measuring instruments

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, direction-dependent spindle stop, and cross slides with tool holders. It is equipped with an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also includes a bar loader, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality turning machine, you should consider the TORNOS DECO 10a we have for sale. Contact us for more information. Additional Information • Cross slides with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Movable headstock • Direction-dependent spindle stop S1 Ffodpfx Abex D Dmtsvjw • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • Thread cutting device for collet chucks ESX 12 • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2003. It features a sliding headstock, a direction-dependent spindle stop, and multiple cross slides with tool holders for versatile machining. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning operations. The machine is equipped with interfaces for bar feeders and tool breakage detection. Further information about this machine is available upon request. Additional Information • Programming software TB-DBCO version 6: Single-station product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Sliding headstock: S1/Z1 axis, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming steps of 0.1 degrees) • Cross slides: • 1 cross slide with 4 tool stations (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) Ffjdpfsx D Dm Hox Abvjw • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent units for rapid positioning • Counter spindle: independent (S4), n = 12,000 rpm, collet F13 • Cross slide support options: • Presettable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation: right-hand direction • S2 motorization (electrical/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling, milling, and threading attachment for collet BSX 12 • Sensor: Tool breakage monitoring with type MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic controls • Interface: Adaptation for LNS bar feeder • Spindle speed: n = 16,000 rpm indicates a machine with moderate spindle speed capacity • Additional equipment: Comprehensive package of measuring devices Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, največja hitrost vretena: 12.000 obr/min, Premer palice (maks.): 10 mm, število osi: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in the year 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication unit, and a drum-type bar loader. It comes with a 'HYBRIDE 10+5' drum for bars up to 10 mm and an integrated hydraulic unit. Please contact us for more information about this machine. Additional Information: • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool stations T11-T24, offering both vertical and horizontal movement • Swiveling workpiece holder on the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required for bars up to 8 mm • Independent counter spindle • Thread-cutting device for collet ESX 12 • Guide bushing lubrication unit with filter • Drum-type bar loader Ffjdpfx Abex D Dmyjvjw • Integrated 25-liter hydraulic unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive package of measuring instruments Technical Specification: Counter Spindle: Yes