Index C200

Index C200

This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information.

Additional Equipment

• Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control.
• Environmental data: Noise level: 73.8 dB(A)

Machine Advantages

Technical Advantages

• Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German.
• Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives).
• Safety: Siemens Safety Integrated (ProfiSafe).
• Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm.
• Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position).
• Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol).
• Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps.
• Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs.

Additional Information

Control Panel
Operating voltage: 400V
Control voltage: 24V DC
Frequency: 50Hz
Nominal output: 54kW
Connected load: 65kVA
Rated current: 94A
Max. pre-fuse: 100A

Main Drive
Main and counter spindle
Spindle head mount: OD 140mm, ID 85mm
Front bearing diameter: 110 mm
Max. torque (100%/40%): 125/170 Nm
Min./max. clamping pressure: 8/80 bar
Piston area pressure: 57 cm²
Piston area tension: 57 cm²
Max. clamping force: 45,600 N
Max. traction force: 45,600 N

C-Axis:
Drive: Spindle hollow shaft motor; direct spindle angle measurement system
Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees

Turret
Tool Carrier 1
X-axis travel: 110 mm
X-axis rapid traverse: 30 m/min
X-axis acceleration: 9 m/s²
X-axis feed force: 5,000 N
Z-axis travel: 320 mm
Z-axis rapid traverse: 50 m/min
Z-axis acceleration: 9 m/s²
Z-axis feed force: 5,000 N
Y-axis travel: 100 mm
Y-axis rapid traverse: 15 m/min
Y-axis acceleration: 9 m/s²
Y-axis feed force: 5,000 N
Stations: 14 with cylindrical shank holder D25x48

Tool Carrier 2
X-axis travel: 110 mm
X-axis rapid traverse: 30 m/min
X-axis acceleration: 9 m/s²
X-axis feed force: 5,000 N
Z-axis travel: 550 mm
Z-axis rapid traverse: 50 m/min
Z-axis acceleration: 9 m/s²
Z-axis feed force: 5,000 N
Y-axis travel: 100 mm
Y-axis rapid traverse: 15 m/min
Y-axis acceleration: 9 m/s²
Y-axis feed force: 5,000 N
Stations: 14 with cylindrical shank holder D25x48
Fjdpfjyyuvtex Af Ssga

Tool Carrier 3

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.