Hidravlična stiskalnica

TJF-GARNET FDM-150

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Cedpokvnumjfx Ahxegt Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Codpfx Ahjg U Utvjxegt Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Codpfxshlnzkj Ahxegt Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, vhodna napetost: 400 V, notranja višina: 180 mm, notranja dolžina: 900 mm, notranja širina: 630 mm, skupna višina: 440 mm, skupna dolžina: 1.380 mm, skupna širina: 1.000 mm, vrsta vhodnega toka: trifazni, NOVO Pečica NOVO Model Modul 2-68 Modularna etažna pečica s keramično kamnito ploščo za pekače 1 x 60x80 / 2x 60x40 na etažo Programabilno upravljanje z nočnim zagonom Izvedba iz nerjavečega jekla Temperatura do max. 350°C Samo pri nas preizkušeno po DGUV V3 Priklop 400V, vtikač 16A-CEE Nova naprava & SAB preverjena z garancijo in servisom rezervnih delov Možnosti: Leasing & najem storitev Odsesovalna napa s kondenzatorjem Podnožje na kolesih z odlagalno polico za pekače Vzhajalnik Orodje za vlečenje Codpfx Ahetp D T Njxsgt Ročni nakladalnik Vzdrževalna pogodba Dostava Uvajanje / inštalacija Na zalogi več etažnih pečic!

Stanje: rabljeno, Pressure 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Cgsdpeiulkqsfx Ahxot Extendable table

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 160 t, Hidrobrasil Double-Column Press – 160 t – 1,500 × 600 mm – Stroke 500 mm For sale is a hydraulic double-column press from Hidrobrasil with a pressing force of 160 t. This twin-cylinder press is specifically designed for insertion work and small series production, featuring a robust construction and precisely adjustable pressing parameters. Thanks to its compact design and flexible table adjustment, it is ideally suited for a wide range of production applications. ===== Technical Data & Information: Hydraulic Double-Column Press – 160 t ==== General Data - Manufacturer: Hidrobrasil - Model: Double-Column Press - Design: Double-Column / Twin-Cylinder Press - Machine Type: Small-Series Press - Pressing Force: 160 t (at 250 bar) - Year of manufacture: 12/2020 - Machine weight: approx. 4,200 kg - Overall height: approx. 2,800 mm ==== Working Area - Open height: 700 mm Cgodpfsgz H Dhex Ahxst - Stroke: 500 mm ==== Table & Ram - Table size: 1,500 × 600 × 100 mm (height adjustable) - Ram plate: 1,500 × 600 × 100 mm - Optionally: 1,600 × 600 × 100 mm - T-slots: per customer specification ==== Speeds - Downstroke speed (idle): 9.8 mm/s - Return speed: 15 mm/s ==== Hydraulics & Drive - Motor power: 11 kW - Pump output: 22 l/min - Oil tank volume: approx. 200 l - Pressure adjustment: approx. 30–160 t via rotary controller ==== Control & Operation - Travel limit via cam switch - Two-hand operation - Adjustable stroke travel ==== Equipment - Height-adjustable table - Paint finish: RAL 5005 (Royal Blue) or per customer request - Ram plate in safety colour (RAL 2009 or RAL 1023) - Assembly, commissioning and operator training optional ===== Insertion work, assembly processes, small series production, forming technology, workshop applications Hydraulic press, double-column press, twin-cylinder press, insertion press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured in compliance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these standards. Our main strengths are special-purpose machine construction and press automation. We offer customised hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Csdsg Rn Efopfx Ahxegt Vse informacije brez garancije. Brez stroškov prevoza.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, skupna dolžina: 1.380 mm, skupna širina: 1.600 mm, moč: 8,5 kW (11,56 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, Oprema: CE označba, dokumentacija / priročnik, NOVO NOVO Pečica NOVO NOVO Model Modul 1-1208 Modularna etažna pečica s keramično kamnito ploščo za pladnje 2 x 60x80 / 4x 60x40 Programabilno upravljanje z nočnim zagonom Notranje mere pečice: 1230x900x180mm, ŠxGxV Izvedba iz nerjavečega jekla Temperatura do maks. 350°C samo pri nas preizkušeno po DGUV V3 Priključek 400V, 8,5 kW, 32A-CEE vtikač Mere: 1600 x 1380 x 440 mm, ŠxGxV (etaža) NOVO naprava & SAB preizkušeno 24 mesecev garancije + servis rezervnih delov Priključek za vodo 3/4 cola, odtok DN 40 Možnost: Napa s kondenzatorjem Cgsdpfx Aottryqjhxst Podstavek na kolesih s polico za pladnje Rastilnik Odmikalna naprava Ročni nakladalec Servisna pogodba Uvajanje & zagon Leasing & najem Druge pečice na zalogi!

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Cgjdpfx Aho Ea U Hoxjt Many other band widths and feed lengths available.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples - Operation via swivel arm on the bridge - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC Codpoh Agnuefx Ahxegt - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.