Stroj za odstranjevanje napak

TIMESAVERS 42-serie-1350-RB

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG-StoreControl P control system 3 identical vertical carousels available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a payload of 305 kg Clear usable dimensions per carrier: Height: 210 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves to halve the usable height Pedpjrw A Eiefx Agperd Total payload up to 14,200 kg Retractable shelf positioned 1,000 mm above finished floor level, with stainless steel worktop Color: GREY / DARK GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors, technical changes, and detail deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Stanje: pripravljen za uporabo (rabljen), Max. operating temperature: 1120°C, heated length: 1000 mm, cooling length: 1850 mm, channel height: 40 mm, conveyor belt width: 110 mm, throughput speed: 100–1000 mm/min, split gas consumption: 1.5–2.5 Nm³/h, control panel: Siemens SIMATIC HMI, length: 5000 mm, width: 650 mm, height: 1350 mm, with integrated ammonia cracker GSP 25 FA, integrated gassing panel, protective gas supplied from ammonia cracker (ammonia supply by customer) + N2 purge gas as required, MSR unit with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection possible. Prodeq Ttz Ejpfx Agped

Stanje: kot nova (razstavni stroj), Generator set in insulated container The unit is in absolutely brand-new condition (104 operating hours). A Krampitz tank is installed inside the container and is filled with 500 liters of diesel fuel. Engine: IVECO Generator: STAMFORD Continuous power output: 20 kVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400V / 231V Speed: 1500 rpm Weight: approx. 4000 kg SÄBU container / Dimensions: 4.00 m long, 2.60 m wide, 3.05 m high Predpfx Agoiw Ed Hspsd - Control panel - Ventilation system for fresh air and exhaust - 700 liter tank - Sound- and heat-insulated container Loading and transport can be offered as an option. Only serious and legitimate inquiries will be answered. Please include your name, email address, and telephone number.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Pedpfx Agjfg E Hnepjrd Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Pedpen Arm Tofx Agpord Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, trajanje garancije: 12 meseci, širina obdelovanca (maks.): 1.300 mm, RWT Deburring Machine – Possible Configuration Four-Station Machine: 1. Deburring with contact roller abrasive belt 2. Cup brush for oxide layer or slag removal 3. Cup brush for edge rounding Predpfx Ajudal Dogped 4. Finish grinding with contact roller BSM series machines can be equipped with the following work units: Abrasive belt grinding unit (R) – removes burrs projecting above the material surface, removes scale and corrosion from the surface Planetary disc brush unit (D) – rounds edges, creates radii, and removes the oxide layer from the sides after laser cutting Rotary aggregate (A) with flap brushes – deburring and edge rounding without removing protective film, surface homogenization Non-woven abrasive brush unit (B) – cleans and polishes the surface material in advance These deburring machines are used for the following applications: Deburring parts after laser cutting – edge deburring, oxide removal, and surface finishing Deburring parts after plasma cutting – slag removal, rust removal, overflow material removal, edge rounding, and surface finishing Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing Deburring parts after waterjet cutting – deburring and edge rounding, removing traces left by waterjet cutting, and final surface finishing Deburring foil-coated stainless steel parts – deburring and edge rounding without removing the protective film Main advantages of the machine: Modular system – we design the machine precisely according to your requirements High-quality and uniform deburring of all product edges Processing of very small workpieces using magnetic or vacuum table Very simple operation via Schneider Electric touchscreen Grinding, deburring, and finishing with a single machine Very fast tool changes and rigid machine frame Due to the wide range of possible machine configurations, we recommend personal consultation and free grinding samples at our facility, so that we can evaluate our customers’ requirements and then suggest the most suitable machine configuration for the respective production.

Stanje: rabljeno, Hymmen CombiCoater ELX-S 1400 coating line with UV dryer. - Technical data will follow shortly Prodpslf H Tcefx Agpsd - For self-dismantling and self-collection.

Stanje: novo, Leto izdelave: 2025, TFON sistem zaobljevanja robov in obdelave površin Sistem zasnovan za izjemno prilagodljivost in natančnost omogoča obdelavo konstrukcijskega jekla, aluminija in nerjavnega jekla v debelinah od 0 do 120 mm. Napredna rešitev zaobljevanja robov in čiščenja površin je razvita za najzahtevnejše industrijske namene. Združljivost materialov: • Konstrukcijsko jeklo, aluminij, nerjavno jeklo Obseg debelin obdelave: • 0 – 120 mm Psdpfoi E Tkaox Agpsrd Zaobljenje robov: • R2 zaobljenje robov zagotavlja gladke, varne robove, kar dviguje tako estetiko kot funkcionalnost. Natančen nadzor: • Vgrajen Siemens avtomatizacijski sistem omogoča zanesljiv in dosledno natančen nadzor skozi celoten proces. Neodvisne obdelovalne postaje: • Več postaj omogoča vzporedno ali zaporedno obdelavo za prilagodljive proizvodne procese. Izbira velikosti miz: • Na voljo s širino delovne mize 650 mm, 1000 mm ali 1300 mm za raznolike proizvodne potrebe. Vrste miz: • Magnetna, vakuumska ali kombinirana magnetno-vakuumska miza za varno in prilagodljivo vpenjanje različnih materialov in formatov obdelovancev. Plazemska & kisikova tehnologija: • Napredni plazemski in kisikovi sistemi učinkovito odstranijo grobe robove in žlindro po rezanju ter zagotavljajo čiste površine. Čiščenje površin: • Učinkovito odstrani umazanijo, rjo, okside in lusko ter pripravi obdelovance na nadaljnje postopke, kot sta varjenje ali površinska zaščita. Zaobljeni robovi za zaščitne premaze: • Doseženi so enakomerni, napak prosti robovi, optimalni za barvanje in druge premaze. Industrijska uporaba: • Jeklarska servisna središča, energetika, rudarstvo, gradbeništvo, avtomobilska industrija – zasnovano za težka in visoko zahtevna okolja. Enotni rezultati zaobljenja: • 8 lamelnih brusnih kolutov zagotavlja dosledno R2 zaobljene robove na vseh delih. Pnevmatski nihajni sistem: • Podaljšuje življenjsko dobo brusnega traku in ohranja stalno kakovost skozi pnevmatsko nihanje. Oblikovano za industrijsko natančnost. Zgrajeno za vzdržljivost. Prilagodljivo za široko področje uporabe. TFON – odličnost pri zaobljenju robov in pripravi površin.

Stanje: novo, Leto izdelave: 2025, -TFON natančni sistem zaobljenja robov in površinske obdelave. - TFON sistem, zasnovan za vrhunsko površinsko obdelavo in zaobljenje robov različnih materialov in industrij, združuje napredno avtomatizacijo z možnostmi prilagodljive konfiguracije, da izpolni vaše natančne proizvodne zahteve. Kompatibilnost materialov: Primeren za obdelavo aluminija, nerjavnega in navadnega (ogljikovega) jekla. Širok razpon debelin: Učinkovito obdeluje materiale debeline od 0 do 120 mm. Prodpfx Aehq A Txjgped Vrhunska kakovost končne obdelave: Stroj je zasnovan za doseganje visoke kakovosti površin, kar izboljšuje estetiko in funkcionalnost izdelka. Industrijska vsestranskost: Idealen za uporabo v medicinski industriji, proizvodnji profesionalne kuhinjske opreme, avtomobilski industriji in pri izdelavi kovinskih dodatkov. Natančno zaobljenje robov: Nudi natančno zaobljene robove z radijem 2 mm, kar izboljšuje varnost in videz končnega izdelka. Napredna avtomatizacija: Integriran Siemensov krmilni sistem zagotavlja izjemno natančnost in zanesljivost delovanja. Neodvisne obdelovalne postaje: Omogočajo prilagodljivo in učinkovito večstopenjsko obdelavo tudi pri zahtevnih delovnih postopkih. Več možnosti širine mize: Na voljo z delovno širino 650 mm, 1000 mm ali 1300 mm, za pokritje različnih proizvodnih potreb. Prilagodljive možnosti transporterja: Izberite med vakuumskim, pol-magnetnim ali pol-vakuumskim transportnim sistemom za varen in zanesljiv transport obdelovancev. Čiščenje površine: Učinkovito odstranjuje rjo, okside in druge površinske nečistoče ter pripravlja obdelovance za nadaljnje postopke. Izboljšana varnost operaterja: Postaja za zaobljenje robov zmanjšuje tveganja za poškodbe zaradi ostrih robov. Vrhunska kakovost obdelave: Stroj je opremljen z abrazivno tehnologijo Scotch za gladko in enakomerno površinsko obdelavo. Podaljšana življenjska doba abrazivov: Pnevmatski oscilacijski sistem zagotavlja daljšo življenjsko dobo abrazivnega traku in Scotch-abraziva, ter zmanjšuje zastoje pri delu. Konsistentno zaobljeni robovi: Šest lamelnih brusilnih kolutov zagotavlja enakomeren radij na vseh obdelovancih za visoko stopnjo ponovljivosti in kakovosti. Zasnovan za zmogljivost. Projektiran za varnost. Ustvarjen za industrijsko vsestranskost. TFON – Popolna površina, vsakokrat.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice Pjdpfx Agjfg E Hlopord