SUMITOMO SHI DEMAG El-Exis S 250/630-1450
SUMITOMO SHI DEMAG El-Exis S 250/630-1450

Name: SUMITOMO SHI DEMAG El-Exis S 250/630-1450
Brand: SUMITOMO SHI DEMAG
Availability: InStock

Leto izdelave

2005

Stanje

Rabljeno

Lokacija

Nemčija

SUMITOMO SHI DEMAG El-Exis S 250/630-1450 SUMITOMO SHI DEMAG El-Exis S 250/630-1450

SUMITOMO SHI DEMAG El-Exis S 250/630-1450

Podatki o stroju

Oznaka stroja:: SUMITOMO SHI DEMAG El-Exis S 250/630-1450

Proizvajalec:: SUMITOMO SHI DEMAG

Model:: El-Exis S 250/630-1450

Leto izdelave:: 2005

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20705710

Referenčna številka:: DE-INJ-SUM-2005-00001

Posodobitev:: nazadnje dne 19.01.2026

Opis

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information.

• 5 similar units available
• Central accumulator for high-speed injection; core, ejector, and nozzle movement
• Nozzle movement parallel to mould movement
• Chrome-plated tie bars at the clamping unit
• Pump drive power: 22.0 kW
• Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE
• Separate power connections for drive and heating
• Control system: colour data display with VGA interface and AT keyboard interface
• Injection, holding pressure and back pressure via servo valve
• Reinforced oil cooler
• Separate water connections for mould and oil cooling
• Compliance: basic European version, conforms to applicable safety regulations
• Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD
• Elastic machine suspension
• Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis
• Reduced centring diameter (D=100/125) for the fixed platen
• Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate
• Standard mould installation height
• Safety interlock: mould opening and ejector forward only with safety gate closed
• Ejector with position control via proportional valve; pressure and speed can be programmed independently
• Frequency-controlled electric screw drive
Cgjdpfox D Rqrex Agqew

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.386 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Dvokomponentni stroj za brizganje ARBURG 720A3200-800-70

Schweiz

524 km

Dvokomponentni stroj za brizganje
ARBURG720A3200-800-70

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Cgedpov S E Dgofx Agqjw Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Request technical specifications.

Poglej podrobnosti

Mali oglas

CNC - Obdelovalni center - horizontalni TOYODA FH 630 SX

Halberstadt

701 km

CNC - Obdelovalni center - horizontalni
TOYODAFH 630 SX

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 10565 Manufacturer: TOYODA Model: FH 630 SX Year of manufacture: 2011 Control system: CNC control CNC: Fanuc 31i - A Location: Halberstadt Country of origin: Japan Serial No.: NS3XXXX X travel: 1000 mm Y travel: 800 mm Z travel: 850 mm B-Axis: 360° Distance spindle/table: 200 - 1050 mm Max. workpiece weight: 800 kg Max. tool weight: 27 kg Max. tool length: 545 mm Max. tool diameter: Ø120 mm Max. workpiece size (lxwxh): Ø 1000 x 1000 mm Tool holder: BT - 50 Tool magazine with: 60 pcs. Spindle speed: 6000 rpm Rapid traverse X/Y/Z: 60 m/min Tool-to-tool change: 2.4 sec Machine length: 7000 mm Machine width: 3500 mm Machine weight approx.: 20.1 t Pallet height: 1200 mm Positioning accuracy (X, Y, Z axes): ± 0.003 mm Repeatability (X, Y, Z axes): ± 0.0015 mm Pallet payload: 800 kg Axial force: 14,700 N Cedjxvw I Iopfx Agqjgw Additional information: - Cutting feed (for X, Y, and Z axes): 0.001 – 30 m/min - Distance between spindle center and upper edge of area: 100 mm – 900 mm - Table size range: 630 mm - Sub-table positioning: 1° - Rotary table positioning: 0.001° - Used tools: SK 50 - Operating oil: 53 l - Slideway lubrication / spindle head lubrication: 3.0 l - Coolant for spindle & ballscrew head: 37 l Machine can be inspected under power by appointment.

Poglej podrobnosti

Mali oglas

Laser za rezanje pločevine Fiber laser sheet cutting machine 12025 MAX 3kW- 40kW

Erwitte

780 km

Laser za rezanje pločevine
Fiber laser sheet cutting machine12025 MAX 3kW- 40kW

Pokliči

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta laserja: vlakenski laser, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Format rezanja (mm): 12000*2500 Cjdpfewwz Dxjx Agqegw Pomak osi X (mm): 2530 Pomak osi Y (mm): 12050 Pomak osi Z (mm): 120 Maksimalna sintetička brzina pozicioniranja (m/min): 140 Ubrzanje (G): 1,5 Dimenzije glavnog uređaja (mm): 15600*3650*1900 Tlocrtna površina (mm): 16000*5500 Ukupna masa stroja (kg): 12500

Poglej podrobnosti

Mali oglas

2006 Biesse Rover B 2.30 Biesse Rover B 2.30

Sesto Calende

494 km

2006 Biesse Rover B 2.30
BiesseRover B 2.30

Pokliči

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Cjdpfxjv Aacfj Agqjgw Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Poglej podrobnosti

Mali oglas

Vertikalni stroj za brizganje ENGEL e-insert 740H/60 single-C

Berlin

713 km

Vertikalni stroj za brizganje
ENGELe-insert 740H/60 single-C

Pokliči

Mali oglas

Dvoranski mostni žerjav ± 11.550 mm x 5.000 kg Demag EPKE

Maarheeze

895 km

Dvoranski mostni žerjav ± 11.550 mm x 5.000 kg
DemagEPKE

Pokliči

Mali oglas

Črpalke Sauer, Sauer - Siro - Črpalke Sauer - Siro - Sundstrand

Rinteln

796 km

Črpalke Sauer, Sauer - Siro - Črpalke
Sauer - Siro - Sundstrand

Pokliči

Mali oglas

Demag Concept 250/630-1450 (leto 2006) Demag Concept 250/630-1450

Trenčianske Stankovce

375 km

Demag Concept 250/630-1450 (leto 2006)
DemagConcept 250/630-1450

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cgedorgw Exopfx Agqew Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Poglej podrobnosti

Mali oglas

Vertikalna večstopenjska visokotlačna centrifugalna črpalka, skoraj nova centrifugalna črpalka kot d GRUNDFOS CRN 10-09 MP-FGJ GI-V

Hessisch Lichtenau

682 km

Vertikalna večstopenjska visokotlačna centrifugalna črpalka, skoraj nova centrifugalna črpalka kot d
GRUNDFOSCRN 10-09 MP-FGJ GI-V

880 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages Codpfxjfupadj Agqogw - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump

Poglej podrobnosti

Mali oglas

Stroj za brizganje ENGEL ES 2050 - 400 HL

Eschweiler

826 km

Stroj za brizganje
ENGELES 2050 - 400 HL

Pokliči

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4 kN, premer vijaka: 70 mm, Offer details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control system: CC200 Display language: German Location: D-52249 Eschweiler Cjdpfxsu Awalo Agqsgw Clamping unit: Clamping force: 4,000 kN Platen size (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Max. opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power, pump motor: 45 kW Dimensions and weights: Installation space approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Oscillation dampers - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Poglej podrobnosti

Oglašujte tukaj