Transportni denar

Stahl stabile Ausfuehrung

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Godpfx Aaot N Ants Usiu Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Gsdpfjgn Tzljx Aa Ueiu Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Gisdpfx Aoucfwpoa Usu

Stanje: rabljeno,

Stanje: novo, as well as other types, as a package Gijdpfx Aaef Ddzqo Usu

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Giedpody Hm Dofx Aa Ueu Stroj je opremljen s podstavkom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized Godpfsh Ek Dajx Aa Uoiu - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Length: 14,250 mm, Width: 8,500 mm, Height: 3,650 mm Giodpfx Aoryv S Aoa Usu Maximum hook height: 3,280 mm, Maximum overall height: 3,950 mm.

Leto izdelave: 2026, stanje: novo, NEW - - Ideal for removing panels from your vertical panel storage. - Suitable for in-house transport of panels to vertical or horizontal panel saws. - The continuously height-adjustable support surface can be precisely set to the height of your panel saw. Giodpfxsd Tyaao Aa Uju - Panels weighing up to max. 250 kg can be transported or swiveled by a single operator. Technical data: Support height: - vertical: approx. 120 - 340 mm - horizontal: approx. 890 - 1200 mm Max. panel size: 5200 × 2100 mm Load capacity: 250 kg Location: Available ex stock 54634 Bitburg - Available immediately - Shipping within Germany: 90,- Euro net

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating Giodpfxsiu Smbo Aa Usu 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package