Zaščita pred trkom

Stahl L-Form Höhe 400 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard Fodpfsh Ek Dasx Ap Eopk - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: Fpedemhhypepfx Ap Ejk - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Fpsdpfx Apomkixwj Eok - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, prevoženi kilometri: 250 km, moč: 235 kW (319,51 KM), prva registracija: 09/2025, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, žerjav, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Unused exhibition vehicle with day registration * Switchable all-wheel drive 4x4 * Leaf spring suspension front and rear * Meiller three-way tipper TRIGENIUS 4000mm x 2420mm * Side walls 600 mm, front wall 800 mm, M Jet * 7 pairs of recessed lashing rings * Drop-side release right and left * Swing gate * Beacon lights * Two-circuit trailer hydraulics * 40 mm trailer coupling * MAN media system * Automatic transmission * Engine brake * Sun visor * Climatronic air conditioning * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel Fpsdpfx Apexnu Sze Eek * Virtual cockpit * Refrigerator * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loading crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively in accordance with our Terms and Conditions Important Note – Important Information: Despite careful examination of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all specifications are provided without guarantee and do not constitute legally binding claims. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is intended as information for contract initiation. The details provided here are given without guarantee and do not represent warranted characteristics.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Fsdpjmhh Dhofx Ap Eepk - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: dober (rabljeno), Jeklene stopnice, zunanje stopnice, namestitvene stopnice Fjdsrg Ivbepfx Ap Espk - Jeklene stopnice: namestitvene stopnice z rešetkastimi stopnicami in ograjo na obeh straneh - Širina: 880 mm - Razmik med stopnicami: cca 200 mm - Višina najvišje stopnice: 1940 mm - Transportne dimenzije: 3880/880/V970 mm - Teža: 150 kg

Stanje: rabljeno, prevoženi kilometri: 237.089 km, moč: 265 kW (360,30 KM), prva registracija: 03/2016, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2026, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, prostornina tovornega prostora: 6 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, navigacijski sistem, pogon na vsa štiri kolesa, žerjav, * Sun visor * ABS (Anti-lock Braking System) * Radio * Cruise control * Electric window lifters * Electrically adjustable mirrors * Heated mirrors * Roof hatch * Longitudinal and transverse differential locks * Transfer case * Off-road reduction gear * AP axles * Steel bumper * High-mounted air intake * Air dryer * Trailer coupling * Hydraulic connection for trailer * Air horns * Duomatic air connection * Navigation system * On-board computer * Central locking * Driver comfort seat * Seat heating * Rear axle differential lock * 16-speed transmission * Suspension: leaf/air * Payload: 6,000 kg * Permanent brake: engine brake Fsdpfoxvvyvsx Ap Espk ---Special superstructure: Crane: Hiab XS 122 ES-2 Hiduo, foldable, remote control + floor operation, 2-stage hydraulic extension, oil cooler, 6th + 7th control circuit for slewing and grab operation, load diagram reading: Lifts 5.3t at 2.3m, 2.8t at 4.2m, 1.52t at 7.9m ---Body: Meiller 3-way steel pallet tipper, raised front wall, spring-assisted drop sides left + right, lashing eyes. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Stanje: dober (rabljeno), Technical data for pallet racking system: Racking system: Hovuma Technical data for assembly: Number of rack rows: 01 unit Length per rack row: approx. 11,945 mm Number of sections per rack row: 04 pcs, each 2,880 mm Number of levels plus ground level: 04 pcs Scope of delivery includes: 05x pallet rack frames, used Material color: cream white Frame profile: 85 x 50 x 17 x 3.0 mm Frame type: C 808 S275 Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (welded lattice structure) 6,640 mm high 870 mm deep 32x pallet rack beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Fsdpfsi D Em Aox Ap Eepk Max. load per pair of beams: 1,600 kg with evenly distributed load 64x safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lift-out 20x heavy-duty anchors, new Manufacturer: MKT Version: galvanized steel Approved for: non-cracked concrete Through bolt installation: M 12-13/95 10x leveling shims, used Version: fully galvanized For leveling rack frames installed on uneven floors 01x capacity sign with specifications for section and shelf loads, manufacturer, and commission number Dimensions: 80 x 220 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 3.000 kg, višina police: 7.500 mm, dolžina opore: 2.700 mm, dolžina police: 28.320 mm, nosilnost: 3.000 kg, skupna masa: 12.000 kg, višina okvirja: 7.500 mm, Prodaja se kakovostna regalna konstrukcija BITO – preverjena, popolna in takoj pripravljena za uporabo. Fedpfjzqv A Hex Ap Eepk Tehnični podatki: • Višina okvirja: 7.500 mm • Razdalja med področji: 2.700 mm • Nosilnost področja: 3.000 kg • Nosilnost polja: 12.000 kg • Nosilni stebri: BITO P4 – 7.500 × 1.100 × 120 mm • Prečke: BITO PT120M – 2.700 × 120 mm Obseg dobave: • 11 × okvirjev • 80 × prečk • vključno z moznikom, varnostnimi vijaki in dodatno opremo Dostava in montaža sta na zahtevo možni – po vsej Nemčiji. Idealno za skladišča, logistiko, proizvodnjo ali trgovino. Kakovostni izdelki znamke BITO, enega vodilnih proizvajalcev opreme za skladiščenje. Kakovostna regalna tehnika po ugodni ceni namesto dražje nove opreme. Če ste zainteresirani, se obrnite – na voljo so tudi večje količine in različne mere.

Stanje: rabljeno, prevoženi kilometri: 110.000 km, moč: 120 kW (163,15 KM), prva registracija: 08/2019, vrsta goriva: dizel, skupna masa: 5.000 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 4.250 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Special equipment: - Second battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Front passenger airbag - Aluminum step edge trim at sliding door entry - Trailer coupling: ball head for increased trailer load – 3.5 t - 13-pin trailer socket - Electric roof fan II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry grab handle on left rear corner pillar - Entry grab handle on right rear corner pillar - Tachograph controls in front under headliner - Suspension: stabilization stage II - Gearbox lock for PTO - Grab handles on A-pillars - Additional master key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal rail for electrical connections (driver’s seat base) - LED cargo area lighting - Cable duct at rear portal - Cable duct on side wall - MBUX multimedia system (7” touchscreen) - PTO 2B with countershaft - Programmable special module - Crossmember with integrated step - Smoker’s package - Spare wheel with operational tires Fpjdpfxoy Nf T Us Ap Esk - Spare wheel carrier under frame rear incl. jack - Rotating warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) - Windscreen wipers with rain sensor - Rough road suspension - Seat belt system with warning device (passenger side) - Cab seats: double passenger seat - Cab seats: comfort driver’s seat - Start/stop engine system - 12V socket in cab - Additional separation relay on battery - USB port centrally under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Additional equipment: - 2 additional master keys - Overhead compartment above roof trim - Aluminum protective strip on floor covering, entry - Trailer coupling for increased trailer load, 3.5 t incl. 13-pin socket - Roof rack mounting rails - Passenger airbag - Double passenger seat - Warning tape application - Hill-start assist - Flat rear roof indicators - Electric roof fan II - Ceiling light in cargo area with door contact - Constant speed control - Eco start/stop system - Entry grab handle on rear left corner pillar - Gearbox lock for PTO - Seat belt monitoring system for passenger seat - Entry grab handles for driver and passenger - Wooden floor - Terminal rail for electrical connection - TEMPMATIK automatic air conditioning - Comfort roof control unit - Comfort driver’s seat - LED light strip in cargo area - M. Becker MobiE generator unit, ref. 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO with countershaft - Programmable special module - Crossmember with integrated step - Smoker’s package - Rain sensor - Spare wheel - Spare wheel carrier under frame rear - Reversing camera - Reversing alarm - Double rear door, opening up to side wall - Yellow rotating warning beacons front left/rear right - Rough road version - Sortimo conversion - Stabilization stage II - Socket in cab - Tank sender for auxiliary heater - Additional separation relay on battery - USB socket 5 V - Other details: interchangeable ball/pintle trailer coupling - Other details: switchable additional warm air heater - Auxiliary battery for retrofit consumers, engine compartment - Third brake light - Overhead storage compartment above windscreen - Storage compartment below dashboard on passenger side - Adaptive brake light - Driver airbag - Hill-start assist - ASR (traction control) - Washer fluid level indicator - Exterior mirrors electrically adjustable and heated, both sides - Outside t