Stroj za brušenje masivnega lesa

Stähle Saturn Quattro

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection Gsdpfx Asvu Hgbjgysbi - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), I am selling window sets suitable for CNC window production centers: Gbsdpfx Agsg Tumyoyji LEUT wood-aluminum 110mm Hole 50mm. Complete set. Very good condition. Available as a set. Can also be purchased separately.

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for Gedpfx Agjt Tqy Eoyjbi - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Gbedpsv D Rg Defx Agyei Manufacturer’s Description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Gsdpfxjvnv Tqs Agysbi Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...

Stanje: rabljeno, Zgornji brusilnik 2 trakova Širina 300 mm Krtača, ki izstopa iz stroja Minimalna višina 2 mm Maksimalna višina 138 mm Električno dviganje in spuščanje Gedpjxm Ty Usfx Agyebi Digitalni prikaz višine prehoda Transportni trak z elektronskim variatorjem napredovanja od 2 do 16 m/min Moč motorja 1. traku: 5,5 kW Moč motorja 2. traku: 4 kW Krmilna plošča Napetost 380V

Stanje: dober (rabljeno), Leto izdelave: 2012, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Rail System (2x3m) Gjdehwd E Nopfx Agyjbi The Manulift DCM-Pro was developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. The control unit is rigidly connected to the load handling attachment, enabling the operator to handle both the hoist and the load with just one hand. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Travel range: lateral 3 meters and longitudinal 2 meters Steel girder: included in the offer Condition: used Complete factory closure, large selection of mezzanines, pallet racks, shelving racks, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. Further items – new and used – can be found in our shop! International shipping costs on request!

Leto izdelave: 2008, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10999, OPIS Mašina za dvostrano brušenje / aparat za brušenje odozgo i odozdo Proizvođač: Löwer Model: DSM 3000 sa povratkom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x četkasta jedinica odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x četkasta jedinica odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivo uvlačenje, 6/11/16 m/min. Gedpev Dfp Hefx Agyebi Priključak na komprimovani vazduh: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Stanje: rabljeno, Zračna lakirna linija znamke Tecnoaspirazioni, kompletna z pogonom, tirnicami in stebri. Dolžina približno 220/240 metrov. Gedeit Umfopfx Agyebi

Stanje: novo, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 2–180 mm LÖWER double-sided sanding machine DSM 2000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal. - Offset sanding and finishing units located above and below - Direct drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large-capacity dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure Gbjdpsvu Hdtsfx Agysi - Sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety device via contact roller in case of oversized workpieces - Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and consistent workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the workpiece infeed side - Automatic workpiece thickness detection (no prior measurement necessary) - Digital thickness display (resolution 0.1 mm) using modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE compliant ----- Base price of the machine on request! ----- Optional accessories for additional cost: Infinitely variable feed 4–20 m/min for speed adjustment to ...