TROLLEY Z IDLE TROLLERS

SIRIO 2500X600

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable Isdpfxscggy Se Adkotd - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available - Itodpfx Aecqvhwodksd

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Ijdpjncd Azjfx Adkotd Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 Iedpfx Adodt Rgvokstd VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Iedpfx Adog D Ugkjkjtd Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Isdpfscht Nyex Adketd Dimter spare parts Dimter accessories

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Itsdpod Nt Rqofx Adkjd Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Leto izdelave: 2026, stanje: novo, Fully automatic orbital stretch wrapper packaging machine SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - Pass-through direction right General technical data: - Main motor power: 2.2 kW - Max. ring speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: - Powered conveyor (infeed and outfeed) for automatic product feed - Adjustable ring speed - Adjustable stretch tension with a mechanical brake device - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic front and rear presses that hold the product from above during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for adapting machine parameters to product requirements - Operator safety systems Optional equipment: - Various types of conveyors - Infeed and outfeed rollers - Air bubble film unit (included in this offer) Technical features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 100 x 18 x 550 mm Conveyor specifications: Iodpfofuwrcex Adkstd - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Load capacity: 150 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns Air bubble film unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20 ~ 76 mm - Suitable film materials: PW film, PE bubble film, PVC film - Cutting and welding system: operating temperature 50°C ~ 150°C

Stanje: rabljeno, Nosilnost: 3200 kg/polica Prečke: 3600*140*50 mm Okvir: 8500*1100*100 mm Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Ponujamo širok program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema, kot na primer: Zaščita okvirja, zaščita vogalov, zaščita pred naletom, zaščite proti preboju, iverne plošče, rešetke, zadnje mreže, globinske prečke – na voljo. Dostava: Prosimo, povprašajte za stroške pošiljanja z navedbo vaše poštne številke, kraja ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Itedpfx Adjg Tmvhokod Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah, kot tudi do predčasne prodaje!

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Iodjdh Tfgjpfx Adkjtd Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space