Magnetni separator sesalne cevi 180 mm

Epper 222210

Leto izdelave: 2024, Stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Location: Ex-stock 54634 Bitburg Lhedpfx Aecqvhxofrop

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.900 kg, skupna višina: 25.000 mm, skupna dolžina: 2.710 mm, skupna širina: 1.040 mm, vhodna napetost: 400 V, We offer a powerful, slow-speed twin-shaft shredder specifically designed for the efficient and precise processing of aluminium, including: 🔹 Rods 🔹 Stranded wires 🔹 Wires 🔹 Flat stock 🔹 Cables The specially engineered shredding system prevents material from being pulled or crushed—aluminium is efficiently cut, not compressed. The knife system ensures clean and precise cuts, preventing vertically fed material from passing through the chamber unprocessed. The blades are manufactured from certified, wear-resistant steel. The shredder is equipped with geared motors from a renowned manufacturer. Lodpfx Ajtvdcyefrohp Available motor options: 2 × 18.5 kW or 2 × 22 kW. Fraction size – configurable to customer requirements. Model RS8: working shaft length 600 mm – identical construction to the RS800 and RS1200 models. Made in Poland.

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm Lsdpfoqy E Rljx Afrehp main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW Ljdou Uh T Djpfx Afrehp 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: nepreverjeno (rabljeno), Maximum milling length: 400 mm Maximum milling width: 150 mm Maximum clamping thickness: 25 mm Hydraulic motor: 2.2 kW 2 milling motors, each 2.2 kW Milling motor speed: 12,000 rpm Lhodpjk Tyrwefx Afrsp Converter: 8 kVA, 200 Hz Weight approx.: 1,200 kg Output: approx. 200 - 600 pieces/hour, depending on shape and size

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Lhjdpfxji Hpk Uj Afrop Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Leto izdelave: 1998, Stanje: dober (rabljeno), I am selling a dowel drilling machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale Lsdsd Exwgspfx Afrjhp

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines Lodpfxeiix Uve Afrshp WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Profiling and finish-milling machine UNIVAR 10, year 1997

Leto izdelave: 1999, Stanje: zelo dobro (rabljeno), Manufacturer: VANGROENWEGHE Lhjdpfxsd Nmdko Afrep Model/Type: M-300 Year of manufacture: 1999 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Notes: Machine: VG TYPE F-300-COMBI/CE Year of manufacture: 1998 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Through-feed sander VG TYPE F-300-COMBI-CE / 1998 - Machine from the Combi series - Contact roller and pad sanding - Pneumatic oscillation and mechanical belt tensioning - Motors: 7.5 + 1 HP / 380 V - Sanding belts: 300 x 1900 mm

Stanje: zelo dobro (rabljeno), SCM S520 Thickness Planer Lhodpfoitkx Eex Afrop Working width: 520 mm Working height: 250 mm Feed speed adjustable: 4 steps Cutterblock with traditional knives 4-knife cutterblock Power: 4 kW Weight: 670 kg