Avtomatski stroj za pakiranje kartonskih škatel

Shanghai catcalw trading company MzCBP01

Leto izdelave: 2023, stanje: novo, Ultrazvočni čistilec s PLC krmiljenjem, posebej zasnovan za medicinske potrebe. Kapaciteta: 50 litrov Samodejno polnjenje: Da Guedpfx Afsfg Eqwsweb Samodejno doziranje: Da Pokrov: Pnevmatski bat Programabilen: Da, s pomočjo PLC Kontrola nivoja tekočine: Da ultrazvočni čistilec, ultrazvočni razmaščevalnik, ultrazvočna pralna naprava, manjši ultrazvočni pralni stroj, medicinski ultrazvočni čistilec, avtomobilska industrija

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 10 h, !! Nous sommes heureux de vous conseiller !! Désignation du modèle ////: Rotection Cartonneuse Caractéristiques ////: Alimentation à double servomoteur, avec station de collage à chaud, capot de sécurité et dispositifs de sécurité Orientation de production ////: Horizontale Système de convoyeur ////: Convoyeur à godets Alimentation des cartons ////: Par le dessus avec bande transporteuse active Afficheur opérateur ////: Écran tactile Entraînements & Commande ////: 8 servomoteurs et commande API Longueur de boîte ////: 150-300 mm Largeur de boîte ////: 120-260 mm Hauteur d’emballage ////: 50-100 mm Vitesse ////: 40-60 boîtes/min en fonction de la taille de la boîte et du poids du produit Recommandation de boîte en carton ////: Boîtes pré-pliées, 250-350g/m³ Consommation électrique ////: Environ 9,5 KW Gsdpfxor E Dpas Afwjub Alimentation électrique ////: 380 V / 50 Hz/ 3 phases Poids de la machine ////: Environ 1000 kg Dimensions de la machine ////: Environ 4257 x 1605 x 1823 mm Matériau de la machine ////: "Inox 304 avec traitement de surface" Station de collage à chaud ////: Requise, options Nordson ou Robatech

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and cost-effective packaging process. Cartons are automatically taken from the magazine, erected, and sealed from the bottom (one direction). The erected boxes are then conveyed out onto a transport belt and collected for filling. Guodpev Nkvpjfx Afwob Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(250-450)xW(150-400)xH(100-400); Max. machine cycle rate (idle): 12 cycles/minute; Power supply: 110/220V, 0.3kW; Compressed air: 5-6 bar, 0.4 m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2300xW1900xH1700mm; Weight: 650kg. Please note that our new equipment prices are often lower than typical used machinery prices. Feel free to contact us and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AM00222090802-01-03, - Function: Heat sealing of blister boxes Gsdpspfcy Esfx Afwjub - Main machine material: Stainless steel 304, aluminium alloy - Dimensions: 1000mm x 715mm x 450mm - Weight: approx. 150 kg (without mould) - Power supply: 220 V 50 / 60 Hz single phase, 3.5 kW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packaging depth: up to 100mm - Production speed: Up to 12 cycles per minute, depending on operator proficiency - Heat sealing pressure: 300-1500kg adjustable Autovak is an international company with research, development, and manufacturing sites in Suzhou, China, as well as sales and service offices in the United States, Germany, and Malaysia. The company has over 20 years of experience in the field of medical device packaging. From OEM production for European packaging machinery manufacturers to the production of proprietary machines and equipment with independent intellectual property rights and own brands, Autovak has accumulated substantial expertise in medical device packaging and online printing.

Stanje: novo, Leto izdelave: 2025, Horizontal cartoner for inserting products into folding cartons. Suitable for a wide variety of solid products, such as tubes, bottles/vials, ampoules, vials, blister packs, cosmetic jars, and vacuum-packed foods. In addition to the product, a brochure or package insert (e.g., instructions for use, manual, etc.) can also be included. The fully automatic packaging process comprises product feeding, carton erecting, product insertion, brochure/leaflet insertion, carton closing, and onward transportation. Fast changeover within the size range to different carton formats is possible simply by adjusting the parameters (no format part or cavity change required). PLC control with touchscreen operating monitor (menu available in multiple languages, e.g., English, German, etc.). - Specifications: Carton dimensions: L(50-200)xW(20-85)xH(15-75)mm; Carton/paperboard thickness requirement (min-max): 250-450g/m²; Max. machine speed idle: 100 cycles/min; Power supply: 380V, 3-phase; Compressed air and consumption: 5-8 bar, 0.16m³; Machine dimensions LxWxH: 3500x1500x1600mm; Weight: 1200kg. Guodev Nkwgspfx Afwsb Please note that our new equipment prices are often below typical used machine prices. Feel free to inquire and let us know your packaging application. Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines come with full warranty.

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Floor area: 46.25 m², air flow rate: 1000 m³/h, relative humidity: 25–35%, length: 8500 mm, width: 5000 mm, height: 3341 mm, with documentation. Gujdpjpcgy Rofx Afwjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CLEANROOM – ISO 8 | Requirements for Cleanroom ISO Class 8 | Cleanroom Room Classification ISO 8 | To achieve ISO 8 air cleanliness class in a Cleanroom, a multi-stage air filtration system is typically applied (e.g., G4 pre-filter, F9 filter, H13 final HEPA filter). Airflow within the room is non-unidirectional (the supplied 'clean' air mixes with 'dirty' air present in the room). Air exhaust vents in an ISO 8 room are installed in the walls. The required number of air changes per hour depends on the activities carried out and the number of personnel present, but a target could be 10–40 air changes per hour. In ISO 8 class, personnel are often present continuously. Employees may wear standard work clothing, and visitors disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent zones at 5–10 Pa. Requirements for equipment and materials intended for Cleanroom ISO 8 (maximum average amount of particles released, assuming 100 samples; measurement according to ISO 14644-14 in a class at least one better than required for device application; number of particles/m3). Detailed description available in photos. Technical drawings included in the images. Ventilation Description: The aim of the ventilation installation was to achieve the following air parameters in the Cleanroom. The structure was built using the GBD PHARMA 2000 system, meeting all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Installation parameters: Gusdpfx Afeq H H Rujwob a. Air cleanliness – ISO 8. b. Temperature: 19–23°C c. Maximum humidity: 38%. a. To ensure the required cleanliness of supplied air, a DOSPEL ventilation unit with a maximum capacity of V = 3500 m3/h [up to 15 air changes per hour] was used. The ventilation unit is equipped with bag filters: pre-filter FK EU5/EC2 and secondary FK-EU9/EC2. Additionally, EUFILTER HEPA 11 filters were used in the ceiling-mounted supply diffusers. Technical data sheets are attached in section H6. As a result, at a measured output of 3264 m3/h, ISO 7 [Class 'C'] room cleanliness was achieved at rest, and thus ISO 8 [Class 'D'] in operation. b. The temperature range of 19–23°C can be easily maintained with an enlarged cooler and aggregate, even with 25% fresh air intake. c. To achieve specified conditions during summer, at high ambient temperatures of around 30°C and humidity of around 80%, a 31.4 kW freon cooler and a 33.5 kW chiller were used. The chiller, made by FUJITSU, was supplied by Klimatherm Gdańsk. The room features automated positive pressure regulation compared to external pressure—differential pressure at the doors: 15 Pa. Ventilation automation allows for an 'economy' mode, where the system operates in a closed loop and maintains a pressure differential of 15 Pa. Technical data attached in the images.

Stanje: novo, Leto izdelave: 2025, Economical blister machine with a quick-change format unit for increased flexibility. Universal feeding system for handling capsules, flat or oval tablets, caplets, triangular tablets, and various other shapes. Adjustable sealing pressure to accommodate different product requirements. The machine is additionally equipped with a film waste cutting device, enabling production runs of approximately 90 minutes. Integrated camera inspection systems (micro-hole detector, BASLER color camera) detect defective blisters and ensure the quality of the blister packaging. The capacity for two forming film rolls and the integrated forming film splicer increase efficiency during material changes. The length of the final blisters can be set via software. Water cooling system, 1 x aluminium format set with dedicated feeding system, aluminium/PVC format set with brush feeder, and unit for print mark detection are included. - Specifications: Sealing principle: platen sealing; Max. format area (feed x width): 245 x 152 mm; Max. forming depth: 12 mm; Compatible forming films: Aluminium, Aluminium/PVC; Max. machine cycle rate (idle): Alu/Alu 40 cycles/min, Alu/PVC 70 cycles/min (equivalent to 57 x 80 mm Alu/PVC blister: 280 blisters/min); Number of lanes: customer-specific; Max. roll diameter for forming film: 600 mm; Power consumption: 9.6 kW; Machine dimensions: 4800 × 740 × 1700 mm; Weight: 2200 kg. Gsdpfjv Nkvcox Afweub Please note that our new prices are often below standard used equipment prices. Feel free to reach out and tell us about your packaging requirements. We typically have 30–50 different new machines immediately available from stock. For customer-specific machines, we offer very short delivery times starting from around 3 weeks. All machines are available with a full warranty.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ET2-120-IP19, The purpose of the labelling machine is to label flat bags on one side. - Carrier material: Translucent (tear-resistant) paper - Repeat length: Label length + min. 3 mm - Machine materials: SS304 stainless steel and anodised aluminium alloy - Stepper and servo motors for precise label positioning - Controlled via Siemens PLC - Label roll core diameter: 76 mm - Maximum label roll outer diameter: 350 mm - Accuracy: ± 1 mm (except in case of product or label faults) Gusdpfxjq U Sfws Afwjb - Label dimensions (LxW): 15-300 mm x 10-130 mm - Power supply: 2.0 kW / 230 V / 50 Hz - Dimensions (LxWxH): 2,000 mm x 800 mm x 1,500 mm - Weight: approx. 180 kg

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Continuous cartoner for blister packaging. Single-lane, infeed rate with vacuum belt: 400 blister packs per minute. GuK stack folding machine, maximum output: 250 folded sheets per minute. Gsdpjr Ny H Hefx Afwoub