Obdelovalni center Seron PRO

Pokliči

Stanje: novo, Leto izdelave: 2026, Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCAT communication, sampling time below 1ms, correction map, RTCP, and remote service access. Working Area: from 1300 x 2000 mm Z-Axis Clearance: from 400 mm Godpfjvyrgqex Adkoka Drive System: Servo drives with EtherCAT protocol; X and Y axes with hardened, ground helical racks, accuracy class 6; Z-axis with precision ball screw, accuracy class 5 Linear Bearings: Trapezoidal rails Travel Speed: up to 60 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave system with gantry angle correction Electrospindle: Swiveling/rotary head assembly 17 kW S6, A-axis range = ±185°, C-axis = ±320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 for 5-axis machines Tool Taper: HSK63F Maximum Electrospindle Speed: up to 24,000 rpm Frame Construction: Welded, ribbed, stress-relieved and precision-machined steel Cutter Shank Diameters: from 2 to 20 mm (option up to 26 mm) Brushless Electrospindle: Yes Table Type: Vacuum table with pneumatic sections Available Equipment Options: - 3-position linear tool changer - 16-position turret tool changer with tool presence sensor - Positioning stops and vacuum blocks - Automatic central lubrication (grease) - Pressure booster - Safety enclosure - Intelligent vacuum zones - Wireless pendant - Tool length and diameter probe - Positioning laser #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Vrtljiva drsna namizna žaga
MartinT66 - sofort verfügbar -

Mali oglas

Vrtljiva drsna namizna žaga Martin T66 - sofort verfügbar -

Bitburg

758 km

23.900 €

Pokliči

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Gkodpfxjv Erkas Adkea Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Obdelovalni center
SERONPRO+

Mali oglas

Stalowa Wola

714 km

65.000 €

Pokliči

Stanje: novo, Leto izdelave: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory preview, LAN and EtherCat communication, sampling time below 2ms, correction map, RTCP, remote service access. Working Area: X: 2500 – 4000 mm; Y: 6000 – 12000 mm Z-axis Clearance: 300 – 700 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks accuracy class 6, Z axis with ball screw accuracy class 5 Linear Bearings: Trapezoidal rails Traverse Speed: Up to 80 m/min Software Resolution: Up to 0.0001 mm Positioning Accuracy: 0.01 mm Gkodpfx Aden Sk Hujkea Gantry Drive: Dual-sided master/slave with angle correction Electrospindles: 12 kW to 50 kW, inverter-controlled Tool Taper: ISO30 or HSK63 ER32 Max Electrospindle Speed: 24,000 rpm (optionally 6,000 / 40,000 / 50,000) Construction: Welded, ribbed, stress-relieved, precision-machined steel Table Type: T-slot raster aluminium, solid aluminium, solid steel Optional Equipment: - Material positioning and correction via camera, laser, or probe - Linear or turret tool magazine - Tool cooling with oil mist or chilled air - 3D laser or tactile scanner - Positioning bases - Additional rotary/angle axes - Drilling and angle heads - Pneumatic clamps - Part marking - Industrial robot integration - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

CNC obdelovalni center
SeronPRO+ Specialist Maszyna do obróbki zlewo

Mali oglas

CNC obdelovalni center Seron PRO+ Specialist Maszyna do obróbki zlewo

Stalowa Wola

714 km

85.000 €

Pokliči

Stanje: novo, Leto izdelave: 2026, Sink processing machine for materials such as sintered quartz, granite, granite composites, as well as ceramic models, etc. Technical specifications: CNC Milling Plotter 1325 PRO+ with a working area of 1300x2500 mm Z-axis range: 700 mm – PRO version OMRON High-Speed AC SERVO drives (set with planetary gearboxes) 1.5 kW ETHERCAT Intelligent energy recovery Industrial real-time control system OSAI OPENSMART, cycle time under 2 ms, supports up to 16 axes, ETHERCAT communication with control cabinet Automatic gantry angle calibration EUCHNER HBA-103037 manual pendant Control cabinet air conditioning Tool length sensor (60 mm) Automatic central lubrication with SKF grease Beam system with pneumatic clamps Sink mounting system Dust extraction channels Godpfx Aoualqqodkeka Ball screw guard on Z-axis Blow-off system for moving components Vacuum sensor system Double scraper set #plotter #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Sesalna enota
SCHUKOVacomat 300

Mali oglas

Gerolzhofen

542 km

Pokliči

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Gjdpfxevxlqms Adkjka Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Extinguishing system: powder extinguisher New price approx. €17,000.00 Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

CNC obdelovalni center
SERONPRO+ 5Axis

Mali oglas

Stalowa Wola

714 km

110.000 €

Pokliči

Stanje: novo, Leto izdelave: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with case-hardened, ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearing: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 deg/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: double-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Spindle inverter: yes Maximum spindle speed: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved and precisely machined steel structure Table type: vacuum, hybrid, steel, aluminium with M16 or M18 holes #router #CNC #milling #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #pywood #particleboard #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell Godpfx Asn Nv H Sedkska

Obdelovalni center
CNC WOODWORKING SENTERPratix S 12B

Mali oglas

Obdelovalni center CNC WOODWORKING SENTER Pratix S 12B

Łask

673 km

15.000 €

~~16.000 €~~

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Godpeuu Ntgsfx Adkska Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Orodje za plazemski rez
HyperthermPowermax800

Mali oglas

Orodje za plazemski rez Hypertherm Powermax800

Wymysłów

701 km

1.127 €

Pokliči

Stanje: zelo dobro (rabljeno), For sale: Hypertherm Powermax 800 plasma cutter in very good condition. /////Price listed per unit///// Gksdpfxjulc Ixs Adksa Hypertherm Powermax 800 Plasma Cutter Plasma Cutter Description: The Powermax800 plasma cutting system uses an inverter power source to deliver a smooth DC output voltage, ensuring excellent cutting and gouging quality on mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a consistent output current, adjustable from 20 to 50 amps, allowing for optimal performance across all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and sever metals up to 1 inch (25 mm) thick.

Mali oglas

Bad Waltersdorf

138 km

Tovarna praška
Knipl

35.000 €

~~39.000 €~~

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.000 mm, notranja dolžina: 6.500 mm, notranja širina: 1.500 mm, notranja višina: 2.200 mm, višina obdelovanca (maks.): 2.200 mm, dolžina obdelovanca (maks.): 6.500 mm, Oprema: kabina, Naprava za nanašanje praškovnih prevlek, za obdelovance velikosti D 6500 mm, Š 1500 mm, V 2200 mm. Gedpevdlfzsfx Adkjka

CNC usmerjevalnik s 3 osmi
DANIBRUM România2128 PANA ATC

Mali oglas

CNC usmerjevalnik s 3 osmi DANIBRUM România 2128 PANA ATC

Comănești

883 km

Pokliči

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 9 kW (12,24 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 2.900 mm, pomik po osi Z: 350 mm, dolžina obdelovanca (maks.): 2.800 mm, širina obdelovanca (maks.): 2.100 mm, višina obdelovanca (maks.): 300 mm, število osi: 3, število mest v zalogovniku orodij: 12, vrsta aktuacije: električni, skupna višina: 2.275 mm, skupna dolžina: 4.060 mm, skupna širina: 3.315 mm, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, 2128 PANA ATC is a next-generation CNC router from DANIBRUM, developed for modern workshops and production facilities seeking high productivity, consistent precision, and efficient automation in a single, fully-integrated machine. Gksdpfxoymcncs Adkea Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine enables rapid tool changes and extended flexibility for processing a wide range of materials: chipboard, MDF, solid wood, plastics, alucobond, and composites. Its robust structure is supported by 25 mm linear guides, M1.25 helical rack and pinion drives, and 750 W servomotors, ensuring fast, smooth movements and precise positioning on all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, offering fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router tailored to the current requirements of furniture manufacturing and industrial processing.