Stroj za upogibanje cevi

SCHWARZE-ROBITECH CN20P

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, Pritisk 85 t, Dolžina upogibanja 2050 mm, Razdalja med stebri 1750 mm, Krmiljenje DELEM, Hod 215 mm, Globina grla 410 mm, Skupna moč 13 kW, Teža 8.750 kg, Dimenzije stroja 3190 x 2100 x 2375 mm Lhjdpfxjw Imq Rs Akhjn

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Lhedowwl I Ijpfx Akhjn Teža stroja cca 3 t Potrebni prostor cca 0 m Vodila so bila obnovljena pred 10 leti.

Stanje: dober (rabljeno), Leto izdelave: 1984, Glava za brušenje: - moč motorja: 2,2 kW - hitrost vrtenja vretena: 1.000 – 8.000 vrt/min - naklon vretena (os A): -10° do +27° - natančnost nastavitev: 1 minuta - nastavitev višine (os Y): 130 mm - obseg giba (os X): 220 mm - obseg nihajnega giba, brezstopenjsko nastavljivo med nihanjem: 0–30 mm - frekvenca nihanja: 30/60 1/min Delovna glava: - nastavitev polmera (os Z): 0,01–50 mm - natančnost nastavitev: 0,01 mm - umik drsnika od brusilnega do merilnega položaja: maks. 49 mm - križna miza, površina za vpenjanje: 155 x 205 mm - gib X – Y: vsaka 60 mm - največji kot vrtenja (os B): 260° - napetost napajanja: 380 V - teža: 1200 kg Dodatna oprema/opcije: - spremenljiv brušilni pritisk - projektor, pritrjen v merilnem položaju - 1 omara z dodatno opremo - različne brusilne glave, prirobniki - rezervoar za hladilno tekočino - dokumentacija Lodpfxsvmpabs Akhehn Na zalogi v našem skladišču.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Lhjdpfxsuz If No Akhjn Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach. Lhsdpfx Aetmqi Dekhjn

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm Ledpfx Akou Et Nbehohn - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 10-166, OFFER 13467 Lhjdpfx Akehrm Iujhjn Technical Data: - Max. material thickness at 40 kg/mm² tensile strength approx.: 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement approx.: W 550 x H 1200 x D 1200 mm - Weight approx.: 180 kg

Leto izdelave: 2026, stanje: novo, Slika 1: Ponujen komplet je sestavljen iz dveh voznih ogrodij, vsako z nosilnostjo 6 ton. Skupno je mogoče prevažati 12 ton. Opremljeni sta s kakovostnimi PU kolesi. Lhsdogi Dl Nepfx Akhsn Preostale slike: Drugi transportni vozni ogrodji v različnih velikostih z višino vstavitve od 60 do 220 mm in z nosilnostmi med 5 in 220 ton. Izvedba kot 3-točkovna, 4-točkovna, kontejnerska ali rotacijska platforma z poliuretanskimi kolesi (za vse vrste tal) ali najlonskimi kolesi (za ravne gladke površine) je možna. Prosimo, pošljite nam povpraševanje z navedbo teže tovora in namena uporabe, da vam pripravimo ponudbo. Kratki dobavni roki iz zaloge. Slike predstavljajo izbor izdelkov.

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Lsdpfxst U R Hzo Akhehn Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Leto izdelave: 2004, stanje: dober (rabljeno), A well-maintained used double-miter cold circular saw from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut function - Hydraulic clamping devices Ledpfx Aekfvhkekhshn - Central lubrication for saw guides - Coolant system - Documentation included Saw blade diameter: 350 mm Cutting capacity: - Round 90°/45°: 100/100 mm - Square 90°/45°: 100x100/100x100 mm - Rectangular 90°/45°: 170x100/130x100 mm - Shortest remnant length for single cut at 90°: 30 mm - Shortest remnant length for automatic operation at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical details, please refer to the PDF document. Technical data and dimensions: Subject to change/errors.