Ekscentrična stiskalnica z enim stolpcem

SCHULER PdR63-450

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O. Dsdpfxju Nfvue Ai Ujuu

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate Dusdpfjcubatex Ai Uou - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch - Emergency stop Dusdogg N Twopfx Ai Ueu - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Dodpfx Asfx Hv Hji Ujuu Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Volume: 1000 l, maximum temperature: 750°C, heating capacity: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Dedpfx Aisw Emyze Uouu

Leto izdelave: 1990, stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Dodpfxehcnxrs Ai Usuu Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Stanje: rabljeno, Leto izdelave: 1997, Tlak 40 t Izvlek 300 mm Hod 630 mm Vgradna višina 900 mm Površina mize 620 x 520 mm Prehodna odprtina v mizi 150 mm Višina mize nad tlemi 600 mm Površina batnice 150 mm Skupna potreba po moči 15,0 kW Teža stroja ca. 4,5 t Prostorska zahteva ca. 1,0 x 1,9 x 3,0 m Odobreno za ročno vstavljanje po CE-normah Dusdpfx Aijvuucko Ueu Z oljnohidravličnim pogonom, nadzor tlaka/časa in hoda, dvoročno upravljanje.

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Dujdpjvut Ncofx Ai Uju Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Leto izdelave: 2018, stanje: novo, Load capacity: max. 1,000 kg Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Coil height: max. 800 mm Dusdpfx Aiedx Ryyj Uou

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Dedpjwq Nc Njfx Ai Ueuu Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.