Stroj za upogibanje cevi

Schneider

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, 610 l/min., 10 barov, 5,5 kW, 400 V, teža cca 250 kg, dimenzije 1490 x 720 x 1220 mm. Dobro stanje. Cena iz skladišča. Prevoz možen za doplačilo! Kedpeybbczofx Af Noll

Stanje: novo, Sheet length: 1050 mm Sheet thickness: 1.0 mm Approx. weight: 0.185 t Dimensions (LxWxH): 1.4 x 0.7 x 1.12 m Kedpfod Eqrpex Af Nell Details: - with base frame - asymmetric roller arrangement - with pre-bending feature - wire insertion groove in lower and rear rollers - adjustment of lower roller via central lever - with gear drive - operating manual in GERMAN and ENGLISH For catalog, see the following link:

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Upravljalna plošča zgoraj, električni dvig vretena, 30 mm vreteno, električno nagibanje 45°, 6 hitrosti, moč motorja 7 kW, litoželezne omejitvene čeljusti, velika miza 2500 mm, 4-valjni podajalnik Haffner z 8 hitrostmi, mere 2500 x 1300 mm, teža 1000 kg, dobro stanje Cena iz skladišča Prevoz možen za doplačilo! Kljdpfxjyaq U De Af Nel

Leto izdelave: 2022, Stanje: rabljeno, Used machine Year of manufacture: 2022 Features and technical data: Klodpfx Aoyamc Ref Nel - V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency - Tank with baked-on internal coating - Standard equipped with all fittings: solenoid valve or pressure switch with unload valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain cock, and shut-off valve - Standard equipped with rubber vibration dampers - With refrigeration dryer and bypass line - For compressors with a 4 kW motor, comply with local electricity supplier regulations - Large ventilator flywheel for optimal cooling - Easily accessible condensate drain under the tank, also suitable for straightforward connection of an Ecomat condensate drain - High-performance refrigeration dryer with Super-Dry Technology and ECO shutoff - On all compressors and units from 5.5 kW upwards, starting via an automatic star-delta starter is mandatory. This is not included in the scope of delivery, but the starting relief is included - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 min-1 - Tank volume: 270 l - Weight: 206 kg - Noise: 78 dB(A) - Voltage: 400 Volt/50 Hz (three-phase) - Effective delivery rate: 520 l/min - Air outlet: 3/4" internal - Drive power: 4.0 kW - Drive type: V-belt - Application: Professional - Installation type: Stationary - Tank size (liters): 250–300 - Tank volume (l): 270 - Effective delivery rate (l/min): 520 - Power (kW): 4.0 - Soundproofed: No - Voltage (V): 400 V - Starting system: Direct-on-line (DOL) - Dryer type: Refrigeration dryer - Compression type: Two-stage - Oil-free: No Dimensions: 945 x 705 x 1800 mm Weight: approx. 200 kg Availability: Short-term Location: 63934 Röllbach

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, notranja dolžina: 7.400 mm, notranja širina: 1.600 mm, notranja višina: 2.200 mm, Praškasto lakiranje – celotna proizvodna linija za velike dele – vključno s pečjo za žganje 7.400 mm, letnik 2018-2021 Celotna praškasta lakirna naprava za velike dele, sestavljena iz: • PEČ (1): Vismont KWP-440/114 – notranja dolžina 7.400 mm – letnik 2018 • PEČ (2): Libra SLET40-25-20 – letnik 2020 • PRAŠNA KABINA: Vismont KNP-1500/06 – letnik 2018 • PRALNA NAPRAVA: Libra MR35-21-17 – letnik 2021 • ROČNA PRALNA NAPRAVA: Libra MR42 – letnik 2020 • FILTRIRNI SISTEM: Kemper 390600 – letnik 2016 • ROČNI SISTEM ZA PRAŠKASTO LAKIRANJE: Nordson Encore HD MPS – letnik 2021 • VIJAČNI KOMPRESOR: Kaeser SM 15 – letnik 2013 • OBESNI TRANSPORTNI SISTEM • VILIČAR: Hyundai 30L-7A – letnik 2012 Kljdpfx Aexrd A Dof Nol Vse naprave so v obratovanju in popolnoma funkcionalne. Cena: odvisna od tega, ali gre za delni ali celotni nakup.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AHL-50, 50,000 liters capacity, above-ground, made of steel sheet. The tank complies with DIN 6616, is fitted with 2 saddle feet, an access ladder, and has been professionally drained and cleaned inside. Ksdpfxob Hpd Re Af Njll Dimensions: L = approx. 10.70 m - D = 2.50 m The tank will be equipped with a brand-new internal plastic lining, including a leak monitoring device housed in a protective case (see sample photo). The plastic lining has a "General Building Authority Approval" and is therefore suitable and approved for storing liquid fertilizer (AHL) as well as NOx reduction agent AUS 32 (AdBlue). The exterior of the tank will be completely sanded, newly primed, and repainted in a RAL color of your choice. The price is ex works – free loaded. (Delivery can be arranged at a favorable additional cost.) Delivery time = by arrangement. Important: The tank shown (sample photo) is a refurbished 50,000-liter tank that has already been delivered to a customer. The shown plastic piping (PVC connection) is not included in the scope of delivery but may be purchased at an additional cost. You will receive an invoice with VAT indicated. The purchase is subject to our general terms and conditions.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ogs30-GA-130-40-MZ, 1 x 30,000 liter storage tank – used 1 x dispenser unit type GA-130/40-MZ – brand new Tank Description: Manufactured according to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is equipped with two saddle supports, is used, cleaned, and fully overhauled. Fitted with the following equipment: • 1 fill pipe with TW cap (filling cap) and dip tube, Kledpfxocybvzj Af Njl • 1 gauge pipe with dipstick and dipstick cap, • 1 vent pipe with vent cap, • 1 brand new overfill prevention device with type approval (AIII), • 1 ladder, as well as 1 spare socket for extraction purposes, • 1 optical leak indicator with type approval and leak detection liquid. The tank is externally newly primed and painted in a RAL color shade. Dimensions: L = approx. 10.00 m + approx. 0.70 m bracket / D = 2.00 m / Weight approx. 6.0 tons. The tank is equipped with a front-mounted, pre-welded bracket onto which a brand new dispenser unit is installed. The dispenser is fully connected to the tank—including an angle check valve and shut-off valve—and is fitted with an approx. 3 m hose and an automatic dispensing nozzle. Dispenser Description: – Brand new – With two dispensing hoses for refueling trucks and cars, non-calibratable, suitable for diesel fuel, switchable, fueling possible from one side only at a time. Delivery rate 1: up to approx. 130 l/min. Delivery rate 2: up to approx. 40 l/min. Approved for above-ground and underground fuel installations, including approx. 2 x 4.0 m dispensing hoses and automatic nozzles ZVA + ZVA 25, as well as a fine filter with washable permanent insert. The dispenser features a 400 V motor with pump and gas separator, including a 3-digit mechanical roller counter for individual refueling quantity display, and a 6-digit totalizer—factory-installed. Optionally available: 1 pcs. hose mast with stainless steel spring The system is fully assembled ready for operation except for the electrical connection of the dispenser. – Ex works, free loaded – General Information: You will receive an invoice with separately itemized VAT. Purchase in accordance with our general terms and conditions. Further fuel systems, storage tanks, heating oil tanks (new and used), as well as rental units also available! In addition, we purchase existing fuel systems and can professionally empty, clean, dismantle, and transport them with certified specialist qualifications in accordance with the Water Resources Act (WHG).

Stanje: novo, Leto izdelave: 2025, DM1100 Z – NEW DESIGN – only €29,800-- Deburring up to 1100mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine features a single wide-belt station, which can be used for deburring parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, as it can be operated with both standard abrasive belts and non-woven/Scotch belts. With the help of an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge rounding machine. Kjdsimdmtspfx Af Noll We also offer a part return system for this machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Diesel Tank – Heating Oil Tank – Storage Container – Steel Tank - Brand new – 10,000 litre capacity – constructed to EN 12285-2, Class B (replacement for DIN 6616), above-ground design, double-walled, including test certificate. - Suitable for installation in areas assigned to Seismic Zone 0. Equipped with an electronic level indicator SmartBox 3. Tank Description: The tank comes with two saddle feet, a manhole with dome cover, and is fitted with the following equipment: - 1 fill pipe with TW cap (filling cap) and dip tube, - 1 dip pipe with dip stick and dip stick cap, - 1 vent pipe with vent hood, - 1 brand new overfill prevention valve with type approval (AIII), - 1 ladder and 1 spare socket for extraction purposes, - 1 optical leak detector with type approval and leak detection fluid. The exterior of the tank is sandblasted, primed, and painted in RAL 7011 iron grey or sky blue RAL 5015 (see sample photo). (Other RAL colours are available on request!) Dimensions: L = approx. 5.30 m – D = 1.60 m – Weight approx. 2.4 t – ex works, loaded free of charge. SmartBox 3 Description: Features audible and visual alarm to indicate minimum and maximum fill levels, including additional control function via relay output, for non-pressurised tanks with liquid media (such as heating oil EL, diesel, etc.), consisting of: - 1 hydrostatic stainless steel measuring probe with 6 m connection cable (measuring range for heating oil/diesel up to 2.9 m tank height) - 1 display unit with 2-line LCD display - 1 relay with change-over contact (max. 250 V AC, max. 3.5 A) - 1 integrated optical and acoustic alarm transmitter A freely adjustable minimum or maximum fill level can be set, between 0 and 99%. Function: The tank content is determined via the selected probe and transmitted to the display unit using a 4–20 mA signal. After inputting the tank data at commissioning, the device automatically calculates the values and displays them on the screen. The digital display unit shows the measured values in litres, volume percent, or fill height in centimetres. Display of the maximum permissible delivery volume (free space), menu language and display in German, English, and French. Technical Data: - Supply voltage: 230 V AC 50 Hz - Protection class: IP30 for indoor enclosure installation Kodpfx Afji Azxtj Njll - Interface: optionally retrofittable General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! We also purchase existing tank systems and can, as a certified specialist company according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Heating Oil Tank - Diesel Tank - Steel Tank - Tank System with a capacity of 20,000 liters, in accordance with DIN 6616/D, above-ground, double-walled, including inspection certificate. The container has two saddle feet, a DN 600 manhole with dome cover, is used, emptied and professionally cleaned inside, and comes equipped with the following fittings: - 1 fill pipe with TW cap (filling cover) and dip tube, - 1 gauging pipe with dipstick and dipstick closure, - 1 vent pipe with vent cap, - 1 brand new overfill protection sensor with type approval (AIII), - 1 ladder and 1 spare socket for extraction purposes, - 1 optical leak detection device with type approval and leak detection fluid. The container will be externally primed and painted in a new RAL color shade. L = approx. 6.90 m / D = 2.00 m / Weight approx. 4.2 tons. / ex works, loaded free of charge. General: The price for the tank station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at a reasonable surcharge.) You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Additional tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can professionally empty, clean, dismantle, and remove them with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG). Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Kledpfx Asi Arumsf Nol Tiefenrod 2 34320 Söhrewald near Kassel / Hesse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6203065, skupna masa: 3.700 kg, vhodna frekvenca: 50 Hz, vhodni tok: 77 A, vhodna napetost: 400 V, Nova stroj, ni bil uporabljen po testiranju. Preglejte fotografije in dodatne informacije. Če imate dodatna vprašanja, nas kontaktirajte! Klodsv Txuujpfx Af Nsl

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, according to DIN 6616/D, aboveground, double-walled, incl. inspection certificate. The tank is equipped with two saddle supports, a manhole DN 600 with dome cover. It is used, cleaned, refurbished, and supplied with the following fittings: • 1 fill pipe with TW cap (filling cap) and dip tube • 1 gauging pipe with dipstick and gauge cap • 1 vent pipe with vent hood • 1 brand new overfill prevention device with type approval (AIII) • 1 ladder as well as 1 spare socket for extraction purposes • 1 optical leak detector with type approval and leak detection fluid The exterior of the tank will be newly primed and painted in a RAL colour shade. The tank shown (sample photo) was painted in RAL 5010 – gentian blue. (Other RAL colours available upon request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 t – ex works, loaded free of charge (Delivery can be offered at a low additional cost.) Kjdpfxji Arvks Af Noll General note: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Additional tank systems (new and used) as well as rental tanks are also available! We also purchase existing tank systems and, as a certified specialist company in accordance with the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them away. ===== For further inquiries, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Commercial Fuel Station – Tank System – Home Fuel Station – Diesel Tank Station Kjdpfsi A Hlfex Af Nell Comprising: 1 x 5,000-litre tank – brand new 1 x Eco Box 75 dispensing pump – brand new Tank Description: 5 m³ steel tank in accordance with EN 12285-2 – Class B – (replacement for DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in seismic zone 0 areas. The tank is equipped with two saddle feet, a manhole with dome cover, and is fitted with the following fittings: - 1 fill pipe with TW cap (filling cap) and suction pipe - 1 dip pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand-new overfill prevention valve with type approval (AIII) - 1 ladder and 1 spare socket for withdrawal purposes - 1 optical leak detection device with type approval and leak fluid The tank is externally sandblasted, primed, and painted in RAL 7011 iron grey. (Other RAL colours available on request.) L = approx. 2.80 m – D = 1.60 m – weight approx. 1.5 t – ex works, loaded free of charge Dispensing Pump Description: Model eco-Box-75 – not legal for trade, Delivery rate up to approx. 75 l/min, suitable for diesel fuel, incl.: - Fuel management terminal with connection to myTecalemit cloud - Includes web-based tank data management software – Basic module – - 2 ID systems (driver/vehicle), for up to 4,000 users - Identification via transponder technology - USB interface for data download - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - 4 m dispensing hose DN 25 with type-approved automatic dispensing nozzle, including swivel joint and hose holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust, powder-coated steel housing, dimensions: approx. 553 x 470 x 380 mm - Two-line monochrome backlit display, character height 8/19 mm - Tank data storage for up to 10,000 fueling transactions - Menu navigation in German, English, and French Magnetic keys/transponders are additionally required. General Information: You will receive an invoice with VAT shown separately. Purchase according to our general terms and conditions. Additional tank systems (new and used) and rental units also available! We also purchase existing tank systems and, with certified specialist qualifications under the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and remove them.

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Automatische Schleifmaschine VIET Mod. Rita 4C EL Fester Tisch, verfahrbare Aggregate Arbeitsbreite: 1350 mm Arbeitshöhe: 4 – 160 mm Kedpfx Afeltlx Ts Noll Nr. 03 Absaughauben, Anschlussdurchmesser 150 mm Vorschubgeschwindigkeit: 6 – 20 m/min mit 3-kW-Frequenzumrichter Hauben-Reinigungsbürste Durchmesser: 120 mm Ausstattung: 1. Querschleifaggregat, Mod. TET 60, elektronisches Pad, 60 Sektoren Lamellenband 6150 x 140 mm Eigenes Schleifband 8350 x 170 mm Bandgeschwindigkeit: 5,6 – 26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm 2. Walzenschleifaggregat, Mod. R320 – 40, Gummierung 40° SH Schleifband 3250 x 1400 mm Bandgeschwindigkeit: 1,5 – 12,5 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben Durchmesser 140 mm, eine mit 200 mm 3. Pufferpoliergruppe, Mod. TE 60, elektronisches Pad, 60 Sektoren Schleifband 3250 x 1400 mm Bandgeschwindigkeit: 2,9 – 14,1 m/s Frequenzumrichter: 15 kW Bandreinigungsgebläse Zwei Absaughauben Durchmesser 140 mm, eine mit 200 mm 4. Querschleifaggregat, Mod. TET 60, elektronisches Pad, 60 Sektoren Lamellenband 6150 x 140 mm Eigenes Schleifband 8350 x 170 mm Bandgeschwindigkeit: 5,6 – 26,2 m/s Frequenzumrichter: 15 kW Drei Absaughauben, Durchmesser 140 mm 5. Scotch-Brite-Aggregat Motorleistung: 0,55 kW Absaughaube, Durchmesser 140 mm 6. Bürstenaggregat Motorleistung: 0,55 kW Absaughaube, Durchmesser 140 mm 7. Plattenreinigungs-Rotationsgebläse

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Heating oil tank - storage container - diesel tank - tank system - steel tank Brand new - with 50,000 liter capacity - in accordance with EN 12285-2 - Class B (replacement for DIN 6616), above-ground, double-walled, incl. test certificate, suitable for installation in seismic zone 0 areas. The tank features two saddle supports, a manhole with dome cover and is equipped with the following fittings: 1 fill pipe with TW cap (filling cap) and dip tube, 1 measuring pipe with sounding rod and rod closure, 1 vent pipe with vent cap, 1 brand-new overfill prevention device with type approval (AIII), Kodpji A Hz Aefx Af Noll 1 ladder as well as 1 spare socket for extraction purposes, 1 optical leak detector with type approval and leak detection fluid. The tank is externally sandblasted, primed, and painted white / RAL 9016 shade (sample photo). (Other RAL colors available upon request!) L = approx. 10.70 m - D = 2.50 m - Weight approx. 9.5 t - ex works, free loaded - General information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tanks (new and used) as well as rental units also available! In addition, we buy existing tank systems and can, with certified specialist qualifications according to the Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and remove them.