50m³ jekleni rezervoar + plastična notranja lupina

Schneider Tankbau AHL ASL Flüssigdünger-Lagertank

Stanje: zelo dobro (rabljeno), Dissolver agitator Geppert Mischtechnik FRW Power: 6.3 kW electric cable winch Speed range: 320–2250 rpm Mobile, movable on castors Iedpfxjq H R Rqj Agpoa Very good condition, directly from production!

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2022042210, Aluminijasti trakasti transporter z podsestavo Dolžina transporterja: 1.500 mm ravni del + 3.000 mm naraščajoči del Naklon v pregibu: 45° Višina ravnega dela: približno 200 mm zgornji rob PVC transportni trak Transportni jermen EM 15/2 0+17 PVC zelen Širina traku: 500 mm 31 kosov prečnih pregrad T40, zvarjenih – razmak: 300 mm * antistatičen zaradi vlaken v spodnji strani tkanine neskončni zvar s stopničasto prstno spojko 40 mm valoviti rob, obojestransko visokofrekvenčno zvarjen * območje brez robov na obeh straneh za vodenje traku v naklonu Iedpfxsh Ellzo Agpsa Prečna razporeditev: -70+35-5+280-5+35+70 Popolno spodnje jekleno ležišče Pogonski motor: ca. 1,1 kW Hitrost traku: ca. 0,53 m/s * opcijsko upravljano s frekvenčnim pretvornikom Priklop: 220/400 V, 50 Hz, zaščita IP54

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Isdpefg E Hnefx Agpsa Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter round: 550 mm Iodefg E Hwopfx Agpoa Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Iedpfofg E Hpsx Agpoa Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) Isdpfx Agofgyicjpsa * Clearly arranged selector switch with pictograms for intuitive operation

Leto izdelave: 2004, Stanje: rabljeno, Tank & Environmental Protection Wozniack – Specialist Company Certified According to Water Resources Act (WHG) Dear Sir or Madam, We offer a 30,000 liter double-walled storage tank for diesel storage, equipped with a new diesel dispensing unit including data acquisition. Nominal capacity: 30 cbm Quantity: 1 Used, but completely overhauled, meaning the tank is cleaned, refurbished, primed, and painted. Paint finish: RAL color of your choice; we are also happy to accommodate your individual color preferences. The system is primed and will be painted prior to delivery. Material: carbon steel in steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / inspection certificate in accordance with DIN 6616 D/2 and type plate. Contents: - 1x dipstick - 1x vent nozzle - 1x filling nozzle - 1x new overfill prevention device - 1x new leak detection device, filled with leak detection liquid - 1x ladder - 1x suction line Configuration: cylindrical storage tank with support legs/mounting console Tank dimensions: length approx. 9,990 mm, diameter approx. 2,000 mm Weight: approx. 6,000 kg Above-ground installation Of course, you can also contribute your requirements to the tank configuration! All our systems are thoroughly inspected and tested by selected employees at our company. Cost-effective delivery is available upon request. Viewing of our systems is possible at any time. We always have additional storage tanks for both above-ground and underground applications in various sizes available for sale on our premises. All tank systems can also be offered without a diesel pump. Top offers: Liquid fertilizer (AHL) tanks in sizes from 10,000 to 100,000 liters. Isdjc Nktbjpfx Agpoa Water and firewater storage tanks also available. Price / Shipping The price for the tank station is ex works in Warstein, loaded free of charge. Delivery can be arranged at an additional, competitive cost. Lead time: immediate You will receive an invoice including VAT. In addition, we purchase used tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport these systems. Kind regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." Ijdpfjf Sqfqsx Agpoa ----- Simply contact us — we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Stanje: dober (rabljeno), Spectro CIROS CCD Water Analysis Device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Isdpfxefiqn Us Agpja Good condition, fully functional. Can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid any misunderstandings, the item can be viewed and tested under power before purchase. If you have any questions, please ask them prior to purchasing to prevent any uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Ijdpfjh S Nxpox Agpoa Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements