Ploščadna žaga v kotni izvedbi

SCHELLING AH 6

Stanje: rabljeno, številka stroja/vozila: 007504, Pozicija 1: Vertikalni skladiščni sistem IMA + SCHELLING-AH 6 Pozicija 2: Kotna krožna žaga za plošče IMA + SCHELLING-AH 6 Lhsdpswuuciefx Abbjb Pozicija 3: Nakladalnik IMA + SCHELLING-AH 6

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Lodpfx Abodt Rgvsbshb VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, številka stroja/vozila: 007486, Maks. širina panela: 2100 mm Maks. dolžina panela: 4300 mm Maks. izteg glavnega žaginega lista: 135 mm Lhedpfxst Sn Azs Abbsb

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), A spinning, drawing, and winding line for the production of monofilament yarns, multifilament FDY, and POY is available. Spinning positions: 24, yarn ends: 192, drawing: cold and hot godets, doff change: without yarn break, number of heated/cold godets: 50/50, winders: 24 (+2 reserve winders). Includes various spare parts for the machine and electronics. Documentation available. On-site inspection possible. Ledpfxjuanq Ts Abbehb

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Lhjdpfxjw I U E As Abbeb Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: zelo dobro (rabljeno), Panel dividing saw - horizontal - with rear lifting table Control: MCS Evolution Software Powered roller conveyors (approx. mm 4500 x 2200) Lifting table (mm) 4300 x 2200 Panel rotating device (for boards) through 90° No. 2 rear pushers (1 with clamping grippers) Program-controlled pusher division No. 10 grippers Max. cutting width (mm): 4300 Useful stroke of the loader (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Scoring saw (max. saw diameter) mm: 20 Main saw (max. saw diameter / power) mm: 460 - 27 kW Variable saw carriage feed (m/min): 0 - 150 No. 4 front air cushion tables Ljdpfx Aeq Rfahjbbohb Total connected load (kW): 36 (approx.)

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Ledpjd Rg Dpefx Abbshb Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), For sale: KURTZ VBR-S3 Cutting Line Lhjdpjuct Upefx Abbjb (complete set: KURTZ VBR-S3 cutting line, KUKA selection robot, VIRO PPZA-1300/24/MZG packaging unit, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000 x 1200 x 1200 mm. Optionally, blocks with dimensions 600 x 1200 x 2400 mm can also be processed. Complete U-shaped line consisting of: - Block buffer loading by tipper - Horizontal cutting with automatic wire positioning, featuring dual-frame cutting and wire oscillation - EPS waste/scrap removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic product selection robot - VIRO packaging machine - Bundle turning station for crosswise arrangement - Palletizing of various sizes of EPS panels on wooden pallets or bonded EPS laths as a base under the EPS bundles column - Automatic stacker/palletizer allowing the formation of columns up to 3 meters in height and up to 3 meters in length - Vertical stretch wrapper for automatic wrapping of EPS bundle columns - Inkjet printers and automatic labelers included - Siemens S7 PLC controller - Complete with protective railings with safety switches - High-capacity line, in very good condition, requires approx. 600 m² of floor space (40m x 15m) - Year of manufacture: 2003 - Electrical supply: 400V; 50Hz; 115kW; 300A

Stanje: zelo dobro (rabljeno), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE (also SOFTFORMING) with through-feed drilling machines, splitter, and high-speed automatic conveyor technology. Configured as follows: A) Infeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner C (1) B) 1st Double-sided sizing and edge-banding machine "BIESSE" model Stream SB1 11.0 Softforming C) 1st Rotation station (90° LONGITUDINAL–CROSS) "RBO (BIESSE)" model GPK-1 D) 2nd Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 9.5 E) 2nd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-2 Lsdpfx Abottgy Hobohb F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (No. 2 horizontal drilling supports, No. 6 lower vertical drilling supports, and No. 3 upper vertical drilling supports) H) 3rd Rotation station (90° STRAIGHT or CROSS–LONGITUDINAL) "RBO (BIESSE)" model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" model Split 4-84 LT L) Outfeed station – Stacking system (gantry) "RBO (BIESSE)" model Winner SC (2)

Stanje: rabljeno, številka stroja/vozila: 007135, Max. širina panela: 800 mm Max. dolžina panela: 2500 mm Dolžina transporterja: 9135 mm Povrat delov za robno lepilko: levo Lsdpfxet Hmpps Abbjhb