Večnamenski udarec

Schüco Artikel-Nr.296566

Stanje: dober (rabljeno), Multifunkcijski prebijalnik, prebijalnik, luknjač, pnevmatski prebijalnik -Št. artikla: 296 566 Ffedpfx Afjb A I H Rolet -Dimenzije: 800/400/H1200 mm -Teža: 180 kg

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Fedpfsizkhvsx Afloft Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: zelo dobro (rabljeno), Multifunction punch, punching machine, hole punch, pneumatic hole punch - Item No.: 296 566 Ffsdpsb A Hl Rjfx Aflet - Weight: 170 kg

Leto izdelave: 1976, Stanje: dober (rabljeno), Bandwidth: 300 - 1,350 mm Ffedpfx Aebh Ubwjfljt Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Mandrel Ø: 508 mm

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: Ffodpfxofxyhfj Aflot - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Fully automatic bar machining center by Federhenn. The machine performs all processing steps required for window or door production in an optimized and efficient workflow. Capacity approximately 100 window units per 8 hours. Fodowgd Acspfx Afleft

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm Fsdpfxspug D Es Afleft - 1 piece contact wheel: 48 mm - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Stanje: dober (rabljeno), Leto izdelave: 1969, Pneumatic gluing press, Fodjd Dxqbjpfx Aflsft Max. pressure: 10 bar, Heated gluing beams, Bonding area: 550 x 40 mm Continuously variable temperature setting for lower and upper gluing beam from 0 to 300°C, Continuously adjustable bonding hold time, Drive power: 5 kW, 380 Volt-50 Hz, Two-hand control by SIEMENS. Pressure build-up via toggle lever, Max. opening stroke approx. 30 mm

Stanje: dober (rabljeno), Plasma cutting unit, plasma cutter - Equipment: without torch package - Cooling: water-cooled Ffjdpsb A Innefx Afljt - Maximum cutting current: 70 A - Mains voltage: 3x400V

Stanje: dober (rabljeno), Leto izdelave: 1995, Offer 24315 Technical Data: - Belt dimension: 2000 x 100 mm Ffsdpfx Aet Stfheflot - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° - 30° - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Contact wheel / grinding roller diameter: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. diameters: 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm