Police za konzolne regale

Schäfer

Stanje: dober (rabljeno), Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Specifications: Number of racking runs: 01 unit Length per run: 22,440 mm Number of bays per run: 06 units Number of levels plus floor level: 06 units Volume Specifications: Pallet spaces per bay: 28 units Pallet spaces per run: 168 units Total pallet spaces: 168 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Maximum pallet weight: 900 kg Maximum bay load: 19,000 kg Clear height of lowest shelf: 1,080 | 880 mm Scope of supply includes: Ncedpeyc S Taofx Abbol 07x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Incl. horizontal and diagonal braces and base plates Frames are pre-assembled (bolted truss structure) Height: 14,100 mm Depth: 1,050 mm 72x pallet racking beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Beam connector: 4-hook Clear span: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 144x safety pins, used Material finish: Sendzimir galvanized To secure beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x leveling shims, used Design: fully galvanized For leveling racking frames on uneven floors 01x load sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will be incurred, which can be quoted separately depending on the place of delivery and scope of supply.

Leto izdelave: 1980, Stanje: dober (rabljeno), with pre-bending Technical Data: Bending length: 2000 mm Max. sheet thickness: 20 mm Pre-bending capacity: 15/11 mm Lower roll diameter: 280 mm Upper roll diameter: 300 mm Main drive power: 16.2 kW Upper roll positioning drive power: 4.8 kW Lower roll positioning drive power: 3.7 kW Nedpokzg E Aofx Abbecl Weight approx.: 14,200 kg Technical data, accessories, and machine description are subject to change and not binding.

Stanje: dober (rabljeno), Tehnični podatki o nosilcu paletnega regala: Regalni sistem: SSI Schäfer Tip: PR 600 Obseg dobave vključuje: 01x nosilec paletnega regala, rabljen Barva materiala: sendzimir pocinkano Tip nosilca: P215 Dimenzije profila: 120 x 100 x 2,50 mm Vključuje prečne in diagonalne vezi, zaščito nosilcev in talne plošče Nosilci so predhodno sestavljeni (zašraufana konstrukcija) Višina: 14.100 mm Globina: 1.050 mm Vaše kontaktne osebe pri nas: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Ncsdpfx Abeycgd Hjbjl Splošne informacije o artiklu: Ta izdelek je na voljo le za osebni prevzem. Morebiten transport oz. dostava tega izdelka je povezana z dodatnimi stroški, ki jih lahko posebej povprašate glede na kraj dostave in obseg.

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), 1 stroj za navijanje steklenih vlaken Bolenz und Schäfer BSD FWA 1/3/2, letnik 2008, največja dolžina pribl. 12 m, s krmiljenjem Siemens Sinumerik, 2 odvijalni stojali na tirnem sistemu, dovajalna črpalka Graco Pultex FRP in podest, pribl. 12x6 tm. Na dražbi v naši avkciji dne 19.2.2026. Uporabite funkcijo Clickout za dražbo. Nedpoyb R Rbsfx Abbscl

Stanje: zelo dobro (rabljeno), Technical Data for Locking Angle Bracket: Manufacturer: SSI Schäfer Included in delivery: 01x Locking angle bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (bearing surface, see description) Including spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Nedpfxepgndgj Abbocl Quick Overview / Areas of Application: - Without spacer block for beam width 60 mm (e.g. INP) - With spacer block (short side inside) for beam width 50 mm (INP or box profile) - With spacer block (long side inside) for beam width 40 mm (INP or box profile) General information about the item: This item is only available for collection. Any shipment or transportation of this item will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Required delivery scope for the push-through protection: 01x U-profile, used Material finish: sendzimir galvanized Total length: approx. 2,765 mm Profile dimensions: C: 60x40x8 mm including 2 locking clips Further information: Racking system: SSI Schäfer suitable for clear bay width: approx. 2,700 mm 06x hexagon bolt: M8 x 35 mm 06x toothed nut: M8 06x washer: M8 General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be provided upon request depending on delivery location and delivery scope. Our services at a glance: (Prices upon request) Assembly, installation Please observe our general assembly conditions. Rack inspection Rack inspection in accordance with DIN EN 15635, carried out as per the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (offloading not included) Njdpfeh Ekdfjx Abbocl

Stanje: dober (rabljeno), Technical Data for Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 unit Length per rack row: 27,990 mm Ncjdpfxeyay D Ie Abbjl Number of bays per rack row: 10 units Number of levels plus ground level: 03 units Technical Data on Capacity: Pallet spaces per bay: 12 units Pallet spaces per rack row: 120 units Total pallet spaces: 120 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack upright frames, used Material finish: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted truss structure) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear width: 2,700 mm Bracket: 5 HK (hooks) Max. load per beam pair: 3,300 kg with evenly distributed load Note: The functionality of the beams remains intact despite the holes. SSI project equipped with heat deflectors that were bolted on according to manufacturer specifications! 120x safety pins, used Material finish: Sendzimir galvanized To secure the beams against accidental lift-out 44x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: cracked concrete 44x leveling plates, used Design: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign Including field and compartment load data, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional requested transport or shipment of this item will incur extra costs, which can be quoted separately depending on place of delivery and scope of supply.

Stanje: dober (rabljeno), Technical specifications for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Installation specifications: Number of rack rows: 01 pcs. Length per rack row: 22,500 mm Number of bays per rack row: 08 pcs. Number of levels plus ground level: 02 pcs. Volume specifications: Pallet positions per bay: 09 pcs. Pallet positions per rack row: 72 pcs. Total pallet positions: 72 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Maximum weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Upright finish: sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal braces, upright guards, and base plates The uprights are pre-assembled (bolted truss structure) Height: 4,000 mm Depth: 1,100 mm 32x pallet rack beams, used Beam color: RAL 4002 red violet Box section: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear width: 2,700 mm Beam connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg, with evenly distributed load Note: The functionality of the beams is not impaired by the holes. This is an SSI project with heat shield plates installed according to manufacturer specifications. 64x safety pins, used Finish: sendzimir galvanized For securing the longitudinal beams against accidental lift-out 36x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 18x shims, used Design: fully galvanized For leveling uprights installed on uneven floors 01x load capacity sign with information on bay and beam load capacities, manufacturer, and commission number Nsdsyaxmhjpfx Abbscl Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is sold for collection only. If transport or shipping is required, additional costs will apply. These can be quoted separately depending on destination and scope of delivery.

Stanje: dober (rabljeno), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 unit Length per rack row: 14,040 mm Number of bays per rack row: 05 units Number of levels plus floor level: 02 units Technical Data for Capacity: Pallet positions per bay: 09 units Pallet positions per rack row: 45 units Total pallet positions: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max): 1,100 kg Scope of delivery: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P73 Profile dimension: 90 x 75 x 2.5 mm Incl. horizontal and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (bolted latticework) Height: 3,600 mm Depth: 1,050 mm 20x pallet rack beams, used Material finish: RAL 4002 red-violet Box section: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max load per beam pair: 3,300 kg, with evenly distributed load Note: The functionality of the beams is unaffected by the holes— SSI project with heat-dust plates installed as per manufacturer specifications! 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x anchor bolts, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Version: Carbon steel, galvanized Nedpfsyapf Isx Abbscl Approved for: cracked concrete 12x leveling plates, used Version: fully galvanized For leveling the rack uprights when installed on uneven floors 01x load capacity sign With specifications for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered only for collection. Any transport or shipping beyond this is subject to additional costs, which can be provided on request depending on the delivery location and scope of delivery.

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Nsdpjuddcasfx Abbjcl Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections.