Brusilnik robov

Samco Unilev 15

Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1988 Stanje: vzdrževan Oprema in tehnični podatki: - Dolžina delovnih miz: 1440 mm - Skupna širina dveh delovnih miz: 710 mm - Nagibna nastavitev delovnih miz: 0 – 30 stopinj - Obratovalni tlak: 6 bar - Dolžina brusilnega traku: 2170 mm - Širina brusilnega traku: 150 mm - Hitrost brusilnega traku: 10 – 20 m/s - Vertikalna nastavitev oscilacijskega agregata: 125 mm Hfodpfx Asxzl Aqedxob - Poraba zraka: 25 NL/min - Elektrika: 400 V / 2,9 kW Teža: 490 kg Razpoložljivost: takoj Lokacija skladišča: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: Hedsuxqzuspfx Adxjfb • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Length of worktables: 144 cm Width of worktables: 71 cm Operating pressure: 6 bar Worktable tilt: 30 degrees Abrasive belt width: 15 cm Hfjdpfx Adjwx H A Aexeb

Stanje: rabljeno, cleaned, function-tested, trial run performed Pneumatic rotary switch replaced 3/2-way valve replaced Belt oscillation modified new pressure regulators installed machine adjusted Hedpfxsvwgf Nj Adxsfb used, good condition Make: Samco Model: Unilev 15 N Machine no.: AM / 030640 Motor: 3 kW Oscillation: pneumatic Veneer edge sanding unit front table approx. 1200 x 220 mm rear table approx. 1200 x 220 mm table tiltable double-sided belt tensioning pneumatic mitre stop height adjustment for unit dust extraction connection Ø 100 mm space required approx. LxWxH mm: 1300 x 800 x 1800 weight approx. 450 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition as inspected

Stanje: zelo dobro (rabljeno), Genini Miniautomat Through-Feed Lathe Automatic lathe for machining squared timber Main spindle with dual-speed motor, power 4.9/5.9 kW Hydraulic pump motor power: 1.5 kW Maximum timber length: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two carriages with profiling tools 1 face spindle for drilling or face profiling Hfedpfx Adev Hgctexeb 1 rough turning tool Machine weight: approx. 1800 kg

Stanje: zelo dobro (rabljeno), Belt dimensions: 150 x 2170 mm Two belt rotation speeds Hodpfx Ajpq R Uasdxsfb Adjustable boot Both top sections adjustable from 0–30° angle Adjustable grinding height

Leto izdelave: 2005, Stanje: dober (rabljeno), številka stroja/vozila: C9 15840, Stroj za profilno krtačenje Tagliabue LB 2 Model: LB 2 TEHNIČNI PODATKI: Leto izdelave: 2005 Tagliabue robni brusilnik s 4 nihajnimi brusilnimi enotami. Hfodpfx Adeg Rn Iasxob Dva navpična valja in dva notranja prečna valja za prečno krtačenje.

Stanje: novo, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling at 0° to 90° -Pneumatically adjustable head angle -Cast iron fences -Spindles adapted for quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -High-precision drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium stops (right and left) with two position stops each -Five quick-release clamps Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Spindle speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm Hfjdpfx Adjp Ecdgoxjb

Stanje: zelo dobro (rabljeno), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Spindle pitch: 32 mm Hfedpevx Aqdsfx Adxjb Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Working pressure: 6–8 bar Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate

Stanje: nepreverjeno (rabljeno), Sanding belt length: 2280 mm Sanding belt width: 140 mm Motor: 2.2 kW Hfodpfovrzcljx Adxjb Table length: 1000 mm Cylindrical grinding attachment Extraction fan Mobile base