Samco Unilev 15 nakup rabljenega (20)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Samco Unilev 15 Edge Sander Belt dimensions: 150 x 2170 mm Two belt speed settings Adjustable shoe Table tiltable 0–30 degrees Kwsdjycpz Uopfx Adkew Adjustable sanding height Pneumatic belt tensioning Belt oscillation Motor power: 3 kW

Stanje: rabljeno, cleaned, function-tested, trial run performed Pneumatic rotary switch replaced 3/2-way valve replaced Belt oscillation modified new pressure regulators installed Kjdsvwgf Nspfx Adksww machine adjusted used, good condition Make: Samco Model: Unilev 15 N Machine no.: AM / 030640 Motor: 3 kW Oscillation: pneumatic Veneer edge sanding unit front table approx. 1200 x 220 mm rear table approx. 1200 x 220 mm table tiltable double-sided belt tensioning pneumatic mitre stop height adjustment for unit dust extraction connection Ø 100 mm space required approx. LxWxH mm: 1300 x 800 x 1800 weight approx. 450 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition as inspected

Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1988 Stanje: vzdrževan Oprema in tehnični podatki: - Dolžina delovnih miz: 1440 mm - Skupna širina dveh delovnih miz: 710 mm - Nagibna nastavitev delovnih miz: 0 – 30 stopinj - Obratovalni tlak: 6 bar - Dolžina brusilnega traku: 2170 mm - Širina brusilnega traku: 150 mm - Hitrost brusilnega traku: 10 – 20 m/s Ksdpfxsxzl Aqo Adkjww - Vertikalna nastavitev oscilacijskega agregata: 125 mm - Poraba zraka: 25 NL/min - Elektrika: 400 V / 2,9 kW Teža: 490 kg Razpoložljivost: takoj Lokacija skladišča: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Samco Unilev 15 Edge Sander Belt dimensions: 150 x 2170 mm Two belt speed settings Adjustable shoe Table tiltable 0–30 degrees Adjustable sanding height Pneumatic belt tensioning Belt oscillation Kodpfexd Rl Nex Adkoww Motor power: 3 kW

Stanje: zelo dobro (rabljeno), Belt dimensions: 150 x 2170 mm Two belt rotation speeds Adjustable boot Both top sections adjustable from 0–30° angle Kwsdpjpq R Uasfx Adkjw Adjustable grinding height

Stanje: pripravljen za uporabo (rabljen), Length of worktables: 144 cm Width of worktables: 71 cm Operating pressure: 6 bar Worktable tilt: 30 degrees Ksdpowx H A Aofx Adkeww Abrasive belt width: 15 cm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.440 mm, skupna širina: 710 mm, skupna višina: 1.300 mm, vrsta vhodnega toka: trifazni, SAMCO Unilev150 double-sided edge sander Specification: • Condition: used • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 x 2150 mm • Two sanding belt speeds Kodpfxevmqype Adkjww • Table dimensions: 22 x 144 cm • Both tables tiltable within a 0-30 degree range • Motor power: 3.5/4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable shoe for veneer sanding on one side and a 15 x 75 cm support "back" on the other • Auxiliary angle guide attachment for angled sanding • Suction nozzle diameter: 140 mm • Weight: approx. 450 kg • Overall dimensions: 144 x 71 x 130 cm (L x W x H) Additional information: • Very good, original technical and visual condition • Provided photos show the actual item for sale • Possibility to power up and test the machine on site • The auction price does not include VAT

Stanje: zelo dobro (rabljeno), Here we offer you an Omron SCARA industrial robot. Omron SCARA industrial robot with PB programming box R6Y XGL400 XG series SCARA robot for industrial applications: • Increased reliability (no belts in XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy to operate • High rigidity • Very compact design SCARA, Reach: 400 mm, Vertical stroke: 150 mm, Max. payload: 5 kg Max. payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Max. payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: ±0.01 mm R: ±0.004 Axis specifications: Kedpfx Adjh H D Rtjkoww Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis ±140° Y-axis ±144° Z-axis ——° R-axis ±360° Type: R6Y XGL400150 Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 1987, Pasu brusilni stroj Proizvajalec: Samco Tip: EG Ksdpjxdnrgjfx Adksww Leto izdelave: 1987 Dolžina brušenja: 3.000 mm Vključno z rezervnimi trakovi ä18326

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dolgopasovni brusilnik SAMCO Delovna širina 2800 mm Kwodpfsyiti Aox Adkjw Delovna višina električno nastavljiva Dve hitrosti brusilnega traku Glavni motor 2,25/3 kW

Stanje: dober (rabljeno), Koda: 0217 Znamka: SAMCO Model: F 3000 Kodpfexivycjx Adksww Tračna brusilka z dvojnim labodjim vratom in tremi motorji, primerna za les, mizarstvo, kovine, aluminij, kompozitne materiale ter razne druge materiale Tehnični podatki: Dolžina mize mm: 3000 Širina mize mm: 800 Vertikalna nastavitev mize mm: 850 2-hitrostni motor tračne brusilke vrt./min: 1400/2800 – 3/4 KM Avtomatsko dvigovanje mize Dolžina brusilnega traku mm: 8000 Širina brusilnega traku mm: 120 Uporabna globina labodjega vratu mm: 600 Višina labodjega vratu mm: 200 Skupne dimenzije mm: 4300 x 1500 x 1800 h Teža kg: 740

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Punching force: 25 t (250 kN) Passage width: 1800 mm (1660 mm usable) Clear span between uprights (max./min.): 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic trolley beam punch Hydraulic pressure: 250 bar Punch table area: 1830 x 500 mm Punch carriage/plate: 500 x 500 mm; travel speed: 800 mm/sec; punching stroke: 63 mm/s, feed/return: 125/125 mm/sec. Kwodsu Szfujpfx Adkjw Operation via control panel and pushbutton/control lever Equipment: 2x feed rollers, Ø 120 x 1630 mm, pneumatic in/out

Stanje: rabljeno, Tehnični podatki: Mere delovne mize: Električno dvižna miza Zaščita traku Pritisk Premer koles: 195 mm Odvodna cev: 2x120 mm Vodoravni pomik mize Vgrajen ventilator Kedpfswxtiiex Adksww Napajanje: 400 V Moč motorja tračnega brusilnika: Skupne dimenzije: Dolžina: 2000 mm Širina: 4400 mm Višina: 1600 mm

Stanje: rabljeno, used, in good condition cleaned, function tested, trial run performed - oil changed Kwedpsv D Rhbjfx Adkow - spare part: feed rollers Manufacturer: Samco Model: Euro-Uno Motor: 2.25 Ah Roller diameter: 120 mm Roller width: 50 mm Feed rollers: 4 units with stand infinitely variable Required space approx. 1000 mm x 800 mm x 800 mm Location: 97447 Gerolzhofen, free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 2006, incl. 2nd sanding shoe Used machine, top specification Manufacturer: SCM Samco Model: EG 2500 Year of manufacture: 2006 Machine no.: AM/28506 Motor: 3.0 / 2.2 kW Sanding length: approx. 2500 mm Sanding width: approx. 1000 mm Abrasive belt length: approx. 6800 mm Table size: approx. 2500 mm x 1000 mm Throat (right): approx. 700 mm Throat (left): approx. 700 mm Electrically adjustable Kodpfx Aovwffbsdkoww Upper belt cover Upper sanding support Belt speeds: 1400 / 2800 rpm = 23 m/sec / 46 m/sec Right/left belt run Extraction port diameter: 160 mm Required space: approx. 3900 mm x 1700 mm x 1500 mm Total connected load: approx. 4.55 kW Location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in existing condition, without any warranty or guarantee.

Stanje: rabljeno, Stroj za vrtanje utorjev SAMCO AS 16 - rabljeno - Premikljiv motor, Kwodpjw Nv Nxjfx Adkew Naprava za vrtanje moznikov ----- Tehnični podatki ----- Dimenzije delovne mize: 550 x 285 mm, Širina vrtanja: 190 mm, Globina vrtanja: 120 mm, Število vrtljajev: 2.840 min⁻¹, Motor: 1,5 kW, Teža: 220 kg

Stanje: dober (rabljeno), pneumatic clamps automatic strip feeding aggregate angle adjustment pneumatic spindle movement strip supports oscillating drill movement adjustment feed stroke adjustment Kjdpfxenwnd As Adkjww power supply 380V

Stanje: zelo dobro (rabljeno), Working range 850 mm 0.12 kW motor Very good condition. Kwodpfx Ador Ha Ufskow

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, številka stroja/vozila: KK052469, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 4kW Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for feed unit Safety guards for hand routers Spindle diameter 30 mm Aigner fence Extraction connection 2x 120 mm Kwodpfx Adsiinm Hskew Speeds: 1400/3500/6000/8000 rpm Operating manual

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge and Disc Sander 2-in-1 SAMCO DG-60 Specification: • Manufacturer: SAMCO • Model: DG-60 Kwedpfx Aovgnagedkew • Working height: 150 mm • Sanding belt dimensions: 150 x 1870 mm • Worktable dimensions: 35 x 64 cm • Motor power: 2.2 kW • Mechanical belt tensioning and oscillation • The machine does not require a compressed air supply • Disc diameter: 600 mm • Worktable tiltable ±45° • Extraction ports: 120 mm diameter • Safety switches and CE markings • Weight: approx. 400 kg • Overall dimensions: 110 x 120 x 130 cm (L x W x H) Additional information: • Excellent, original technical and visual condition • The attached photos show the actual item for sale • Possibility to power up and inspect the machine on site • The listed price does not include VAT or transport costs