Wide-belt sander

SAC rte 1000

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Bsdpfx Amjh U Dame Eelp Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact information.

Stanje: generalkompletno obnovljen (rabljeno), REKORD 400 MODIFIED WITH TANK AND COOLING SYSTEM Bjdpoh A N R Sjfx Am Ejlp SHARPENING MACHINE FOR TUNGSTEN CARBIDE AND HSS CIRCULAR SAWS (FULLY OIL-BASED OPERATION) FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP feed motor for grinding carriage Cooling system indicator (Oil bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifier lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual bevel angle adjustment using scale rod No. 1 copy wheel No. 1 diamond wheel, diameter 150 x 4 - 60° No. 1 bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm

Leto izdelave: 1982, stanje: rabljeno, V dobrem stanju Bljdpfx Amjdq Ug Ij Eop

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation 2 abrasive belt speeds Abrasive belt cover on top CE compliant Includes special grinding shoe Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!) Blodpfxev D H Sie Am Eop

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Blsdpfjg A D Anox Am Esp Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: zelo dobro (rabljeno), Waelzkolbenpumpe (Roots blower) Manufacturer: Pfeiffer Model: Okta WKP 2000 A M Pumping speed: approx. 2065 m³/h Bodpfxsdiwccs Am Eslp Warranty: 12 months

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 4 kW motor 4 noži Dolžina mize 198 cm Bljdpfxoul Utmj Am Esp Širina mize 41 cm

Stanje: pripravljen za uporabo (rabljen), Število vreten: 6 kos. Delovna širina: 230 mm Višina stroja: 120 mm Dolžina strojne mize: 2000 mm Motor za podajanje: 4 kW Hitrost podajanja: 5–24 m/min. WEINIG strojna miza in avtomat za utore Unimat 23 E ----- 6 vreten (od tega 2 na desni strani), močnejši motorji, 8.000 vrt/min, nadzor ATS Stroj se pred dostavo očisti in preveri glede delovanja. Delovna širina: 20–230 mm Višina obdelovanca: 8–120 mm 1. Vreteno spodaj: 5,5 kW (motor je bil obnovljen) ----- Premer: 40 mm Število vrtljajev: 6.000 vrt/min Krog obdelave orodja: 125–180 mm Naprava za utore, vključno z orodjem Vložek mize, kaljen pred 1. spodnjim vreténom 2. Vreteno desno: 12,1 kW (motor je bil obnovljen) ----- Skupni motor z levo vertikalno vreteno Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–250 mm Maks. premer orodja za oporo: 203 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm 3. Vreteno levo ----- Skupni motor z 2. vretenom Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–200 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm Pritiskalnik pred levim vretenom, vključno z stranskim valjčnim pritiskom, vzmeten 4. Vreteno desno: 8,3 kW (motor je bil obnovljen) ----- Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krog obdelave orodja: 112–250 mm Maks. premer orodja za oporo: 203 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 80 mm 5. Vreteno zgoraj: 7,5 kW ----- Premer: 40 mm Število vrtljajev: 8.000 vrt/min Krogi obdelave orodja: 112–200 mm Maks. globina utora: 35 mm Nastavitvena pot, aksialna: 45 mm Razdeljen pritiskalnik pred zgornjim vretenom, nastavljiv na krog obdelave orodja in odmakljiv od orodja, vzmeten. 6. Vreteno spodaj: 4,0 kW ----- Premer: 40 mm Število vrtljajev: 6000 vrt/min Krog obdelave orodja: 112–250 mm Maks. globina utora: 15 mm Nastavitvena pot, aksialna: 45 mm Vretena, splošno ----- Vsa vretena za utore imajo visoko natančnost pri obhodnosti. Mesta za mazanje za aksialno premikanje vretena. Podajalni sistem ----- Motor z mehansko zavoro, 4 kW Mehanski podajalnik, brezstopenjsko nastavljiv: 5–24 m/min. Podajalni valj pred 1. spodnjim orodjem pnevmatsko nastavljiv navzgor in navzdol, valji Durofer z ostro nazobčenostjo (patent Weinig) z omejitvijo globine in samoočistilni Nastavitvena pot podajalnih valjev glede na levo vreteno, aksialna: 35 mm Elektrika stroja ----- Bedpfx Amjxz Hh Uj Eslp Napetost: 440 V (območje napetosti: 380–420 voltov), 50 Hz. Podstavek stroja, mize in opore ----- Strojna miza dolga 2,0 m (vključno s tirnico) Ročna črpalka za vnos voska na mize Eno gnano gumijasto valjčno kolo (v izhodni mizi, vzmeteno) Dva gnjena valjčna kolesa v strojni mizi, kaljena Upravljanje stroja ----- Pritiskalnik pred zgornjim vretenom z mehanskim digitalnim prikazovalnikom. Odvod po zgornjem vretenu z mehanskim digitalnim prikazovalnikom. ATS/sistem, avtomatsko pozicioniranje po 2 oseh za vreteno št. 3 in 5 Min. delovna višina: 12 mm Električna nastavitev višine zgornjih vreten in podajanja Osrednja lega mest za mazanje na sprednji strani stroja Elektronski digitalni prikazovalniki na vretenu št. 3 in 5, aksialno, vreteno št. 6, radialno, vreteno št. 4, aksialno in radialno Varnost in zvočna zaščita ----- Varna, popolna zaščita Enostavno dvigovanje...

Stanje: rabljeno, Costa Vielblattsäge - Modell: Lince - Maximale Schnitthöhe: 140 mm Bjdpfjvw Rplex Am Ejlp - Motorleistung: 30 kW

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Bjdpfx Aetwb U Ajm Eelp Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.