Vibro sito

Russell 804

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, SRF Master Illustration on the left 2 m extraction arm Application area Low levels of fume/dust Occasional use Benefits Minimal repositioning of the extraction hood required Greater flexibility thanks to additional hose connection at the rear Features Safe operation with filter monitoring Extraction hood can rotate and swivel 360 degrees Push handle and cable holder Process 3-stage Filter type Disposable filter Filter surface approx. 12 m² Separation efficiency > 99% Filter material Fiberglass fleece Welding fume separation class W3 Fpjdpfedqzbrsx Advjd Additional filters Two pre-filters Basic data Extraction capacity max. 950 m³/h Diameter of extraction arm Ø 150 mm Length of extraction arm 2 m Diameter of suction connection Ø 150 mm Power supply 230 V / 50Hz Motor power 1.1 kW Sound pressure level 72 dB(A) Dimensions (W x D x H) 705 x 655 x 900 mm Weight approx. 71 kg

Stanje: zelo dobro (rabljeno), Imamo dve skoraj enaki presejalni postaji na okvirjih za postavitev nad zabojnike. Obe sta bili novi leta 2014 in sta v zelo lepem stanju. Fotografije prikazujejo stroje pred pranjem. Premer sita je 550 mm. Na voljo različne velikosti mrež. Vsak stroj bo dobavljen z eno mrežo. Fodpfx Aevpv Nusdvspd

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Fedpoxnnd Dsfx Advspd Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug

Stanje: novo, Airflow rate 1860 m³/h Vacuum/Pressure 2,900 Pa Drive power 1.1 kW Filter area 10 m² Sound level 72 dB(A) Connection 400/50 V/Hz Fpodpshp S Trofx Adved Space requirement approx. 665 x 1100 x 1495 mm Weight approx. 200 kg Sanders Art. No. 10224980 Extraction unit, welding fume extraction (with automatic cleaning) - Hose arm 3 m, internal joints - Filter cartridge: Dust class M - Pre-filter: Baffle plate - Power supply: 3Ph+N+PE The Filter Unit ----- The mobile filter unit Cartmaster IFA is particularly suitable for welding applications with unalloyed and alloyed steels, galvanized materials, and aluminium in environments with high fume generation due to its automatic cleaning system. It meets the safety requirements for devices in welding fume class "W3" (high-alloyed steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be operated in recirculation mode, as it fulfills the exception regulations according to TRGS 560. The specifically developed, contamination-dependent cleaning system ensures excellent filter cartridge regeneration, guaranteeing optimal extraction performance throughout operation. The separated particles are collected in a dust drawer, from which they can be properly disposed of. The powerful screw fan maintains high airflow even when the filter cartridge is saturated. Filter Media ----- A baffle plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency >99%) filters the finest fumes and dust particles. The cartridge is factory coated, which increases service life. The Extraction Arm ----- The extraction arm can be effortlessly positioned via its 3 internal, spring-supported joints and remains stable in the selected position. A throttle valve integrated in the extraction hood enables adjustment of the airflow volume.

Stanje: rabljeno, Proizvajalec: Amcko Model: A-30 Tip: Vibracijsko sito Premer: 30” - 76,2 cm Fjdpfx Aox R Dg Asdvopd Skupna višina: 90 cm Število ločevalnih sit: 1 Sito z sistemom proti mašenju

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 9.600 h, Funkcionalnost: popolnoma funkcionalen, Kaeser SK21 vijačni kompresor iz leta 2007 v vrhunsko ohranjenem stanju. Servisni komplet (oljni ločevalni vložek, izmenljivi filter, zračni filter in olje) je vključen. Servisna dokumentacija in knjiga kompresorja sta priloženi. Moč: 11 kW Tlak: 8 bar Delovne ure pod obremenitvijo: cca. 9.600 h Fsdpfx Asx H Ulusdvopd #8442

Leto izdelave: 2009, stanje: rabljeno, Leto: 2009 Tip: Vibracijsko sito Material: nerjaveče jeklo Fjdpfx Adeykb U Nevspd Referenca motorja: Elettromeccanica Tarcisio Pugni PVF-F 200 Moč motorja: 1,1 kW / 1500 vrt/min Nazivni premer sita: 900 mm Sistem čiščenja sita: kroglice Dimenzije stroja: 110 x 130 x 120 cm Načrt za zamenjavo mreže: ta element je lahko predmet ločene ponudbe.

Stanje: rabljeno, Proizvajalec: AZO Model: E450 B1 Tip: rotacijsko sito Uporaba: kontrolno in varnostno presejevanje Nerjaveče jeklo Fsdpfx Adsx R A U Ssvjpd Moč motorja: 1,3 kW ATEX klasifikacija: Exe G1-3 Te 30 Kapaciteta: maks. 6000 kg/h, odvisno od velikosti sita Dokumentacija na voljo

Stanje: dober (rabljeno), Leto izdelave: 2013, Powered roller conveyor, 5.95m, width 64cm, Transnorm – used - Ex-works price (net): €395! Manufacturer: Transnorm Year of manufacture: 2013 Segment length: approx. 5.95m Segment width: approx. 68cm Fpodpfjwxvrtox Advod Roller length: approx. 64cm Roller diameter: approx. 4cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Powered roller conveyor, 3.80m, width 64cm, Transnorm – used - Ex-works price (net): €295! Manufacturer: Transnorm Year of manufacture: 2013 Segment length: approx. 3.80m Segment width: approx. 68cm Roller length: approx. 64cm Roller diameter: approx. 4cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Unfortunately, the conveyors were not photographed – here you can see the rear part of the roller conveyor.