Stolpna vrtalna stroj z menjalnikom

Rogi WD35

Stanje: skoraj kot novo (rabljeno), Stolpni vrtalni stroj Gillardon tip GB 30 V, hitrost vrtenja 60 -1800 obr/min, avtomatski pomik, zelo dobro ohranjen, vpenjalni stožec MK 3. Iedpfoxpxbcjx Adkjap

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 16,92 kW (23,00 KM), vrsta goriva: bencin, vrsta prenosa: hidrostat, Leto izdelave: 2024, obratovalne ure: 75 h, Agria 5900 Taifun Professional Hydrostatic Implement Carrier Technical Specifications: - Kawasaki 2-cylinder, 4-stroke petrol engine, 23 HP, with electric start - Transmission: Infinitely variable hydrostatic drive with single-plate dry clutch - Speeds: Forward: 0–7 km/h, Reverse: 0–3.6 km/h - Handlebar: Rubber-mounted, tool-free adjustment for height and lateral position - Steering: Power steering (Handlebar-Active Steering) - Tyres: 23 x 8.50 - 12 AS - Standard equipment includes: tyres, service and parking brake, hour meter, manual and electric starter, power socket - Fuel: Unleaded petrol - Weight: approx. 221 kg Features: - Intuitive steering with minimal effort thanks to Handlebar-Active Steering - Patented easy-control operating unit for intuitive command - Powerful professional-grade engines guarantee ample power for all attachments - Portal axle for shifting the centre of gravity based on local site conditions and attachment used - High visibility even in poor lighting, thanks to LED safety lights - Standard support leg enables the machine to be parked comfortably without an attachment - Hydraulic safety valve for secure hold even on steep slopes - Optimised air intake reduces ingress of dirt and dust - Central parking brake - Infinitely variable hydrostatic drive enables optimal adaptation of working speed - Robust and low-maintenance construction for continuous use under toughest conditions - Hour meter as standard - Agria attachment flange for positive, secure connection between base unit and attachment - Robust engine options ensure efficient work, even with professional attachments - Freewheeling function allows easy machine movement without engine running Possible Attachments: - Turf maintenance: mowing, mulching, baling, band rake - Soil preparation: reverse rotary tillers, harrows - Grounds and path maintenance: weed removal, snowploughing, snow blowing, sand/salt spreading, sweeping Iajdpfxsv Ecdke Adkjp - Woodland maintenance: brushwood chipping This Agria 5900 Cyclone Hydro implement carrier was built in 2024, has approx. 75 operating hours, and has been used as a demonstration unit only. The Cyclone is in like-new overall condition, with only minor signs of use and is immediately ready for operation. Sale occurs as a used machine under exclusion of return, warranty, and guarantee. Net price €18,479 // Gross price €21,990 - Viewing / test drive welcome - Nationwide shipping via freight forwarder: €180 - Financing / leasing can be tailored to your needs!

Stanje: novo, Leto izdelave: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill for metal, designed for precise drilling operations in professional and workshop applications. With stepless speed adjustment, a robust construction, and versatile standard equipment, this model delivers maximum control over the drilling process and high work efficiency. Key Advantages of the Machine • Stepless speed regulation – range from 440–2600 rpm allows optimal adaptation to the material being processed. • Robust cast iron construction – provides high rigidity and reduces vibrations during operation. • Worktable with height and angle adjustment – tiltable from -45° to +45° and height-adjustable via rack and pinion. • Laser indicator and LED lighting – ensure maximum drilling precision and operator comfort. • Electronic speed display – enables full parameter control in real time. • 65 mm vice included – machine ready to use straight after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a sturdy column with a 60 mm diameter and a rigid cast iron base of 345 × 210 mm. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, and a spindle travel of 60 mm enables drilling of deep holes. The total height of the machine is just 870 mm, making it an extremely ergonomic and portable unit. Precision and Work Efficiency Thanks to its 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables effective drilling in metal up to 16 mm in diameter. There is no need to change gears – the infinitely variable speed control significantly shortens machine setup times. The ergonomic three-arm feed lever, depth gauge, and spindle guidance system provide high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: • locksmith and service workshops • maintenance departments • technical schools • small production lines and prototyping facilities Standard Equipment • 65 mm vice • Laser drilling indicator • LED work area lighting • Electronic speed display • Three-arm feed lever • Tilting table with rack-and-pinion height adjustment Technical Data Parameter Value Max. drilling diameter 16 mm Speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Ijdpfjxbzuvsx Adksap Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Iedohpktvepfx Adkoap Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: dober (rabljeno), Leto izdelave: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear system for solar power distribution Switchgear details: Manufacturer: Horlemann Switching configuration: KKÜHTTT Model: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) Degree of protection: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin iPrimary voltage: 10 kV Secondary voltage: 400-230 V Connection: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is provided via a pressure relief chamber in the lower section of the switchgear panel. Documentation: Test report Ijdpfenfu Dyox Adksap Wiring diagram Financing is also available through our bank. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Iodpfx Asu Sbpvjdkjap Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: novo, Centre distance ----- 1000 mm Centre height ----- 230 mm Swing over bed ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25–2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital display brand SINO * Quick-change toolpost type Multifix TOOB2 with 4 holders * Self-centering 3-jaw chuck 250 mm * Independent 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and travelling steady rests * LED work lamp and coolant system * Electric brake (CE) Iajdpfjk Iug Tsx Adksp * Foot brake * Box with various tools

Stanje: novo, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Iajdpfoilk Ekjx Adkjp Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for machining pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Quiet operation thanks to robust construction - Automatic shut-off after cutting via micro limit switch - Quick-release vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly as the use of lubricants and cooling fluids is not required - Ideally suited for construction site use thanks to low net weight - Base frame optionally available (not included in delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at extra cost: 129 euros net (special price)

Stanje: novo, WMD25LV - 230V / 1Ph Drilling capacity in steel: 25 mm Milling capacity in steel: 20 mm Face milling: 63 mm Motor: brushless 750W Spindle speed, stepless: 50 - 3000 rpm Spindle travel: 50 mm Spindle taper: MT3 Worktable: 700 x 180 mm Cross travel: 150 mm Longitudinal travel: 490 mm T-slots: 3 x 12 mm Throat: 170 mm Distance spindle - table: 325 mm Weight: 160 KG STANDARD ACCESSORIES * Drill chuck incl. key * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right switching Iaodpfx Adoga T Eiokjp * Milling head rotatable left / right 90 degrees * Toolbox with various tools OPTION * Stand cabinet € 249.00 excl. VAT

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Iasdpfof Nb E Rox Adkep Throat: 370 mm Drilling stroke: 200 mm Spindle taper: MT 4 Table: 580 x 460 mm Column diameter: 160 mm Speed range: 75 - 2020 rpm Feeds: 0.1 - 0.2 - 0.3 - 0.4 mm/rev Total power requirement: 1.5 kW Machine weight approx. 700 kg Dimensions (L x W x H): 1.1 x 0.6 x 2.35 m High-quality column drill for industrial use. The machine is also suitable for multi-shift operation. • Machine base designed for clamping tall workpieces • Digital depth gauge • Gear head swivels 180° • Maximum smoothness thanks to hardened, ground gears running in an oil bath • Tapping function • Electromagnetic clutch for feed • Automatic feed • Electric motorized table height adjustment