Drsna namizna žaga

Robland M 500 M - 550

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Dolžina sani: 3200 mm Širina reza na vzdolžnem prislonu: 1000 mm Širina reza na prečnem prislonu: 3200 mm Globina reza: 200 mm Predrezilo: ne Višinsko nastavljanje žaginega lista: električno Nagib žaginega lista: električno Nastavitev vzdolžnega prislona: ročno Prikaz kota žaginega lista: skala Prikaz višine reza: - Kedpfx Abexzfw Ioxolu Prikaz vzdolžnega prislona: skala Prikaz prečnega merila: skala Maksimalni premer žaginega lista: 550 mm Premer žaginega lista popolnoma pod mizo: 500 mm Moč motorja: 9 kW Motorna zavora: da / avtomatska Priključek za odsesavanje: 100 mm in 120 mm Dolžina stroja: 3500 mm Širina stroja: 2000 mm Teža: 900 kg

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier Klodpfxsx S Hmzj Abxju

Stanje: rabljeno, Formatna krožna žaga ALTENDORF F45 - rabljena - Dvojni drsni voziček, predrezalna enota, paralelni prislon s fino nastavitvijo, podaljšana miza, hidravlično nastavljanje višine, hidravlično nagibanje, digitalni prikaz kota nagiba, indikator hitrosti, podaljšek mize iz eloksiranega aluminija, razširitev mize iz eloksiranega aluminija, kotni prislon, ozká in široka zgornja zaščitna kapa, avtomatska zavora, pregledano na prah ----- Tehnični podatki ----- Nagib: 45°, Dolžina vozička: 3.200 mm, Širina reza: 1.300 mm, Višina reza: 125 mm, Maks. Ø žaginega lista: 400 mm, Hitrosti: 3.000/4.000/5.000/6.000 obr/min, Moč motorja: 5,5 kW, Teža: 1040 kg Kjdow Nx A Iopfx Abxslu

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Saw-Moulder-Surface Planer-Thicknesse-Mortiser Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tilting: 0°-45° - Max. cutting height at 90°/45°: 75/60 mm - Sliding table: 430 x 1300 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer and Thickness Planer: - Cutter block diameter: 75 mm - Cutter block with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. planing width: 250 mm - Max. stock removal, surface planer: 5 mm - Fence tilt: 0°-45° - Max. thicknessing width: 248 mm - Max. stock removal, thicknesser: 2.5 mm - Max. workpiece height, thicknesser: 190 mm - Feed speed: 8 m/min - Surface table size: 1085 x 256 mm Kodpevz E Sisfx Abxelu - Thicknessing table size: 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Leto izdelave: 2026, stanje: novo, Continuous Pasteuriser Electric – up to 400 l/h Klsdpfx Ajt Uzitsbxeu * Water bath vessel * Electric heating 13.5 / 18 / 27 / 31.5 kW – 400 V * Tank (stainless steel), 150 l, with thermal insulation * Tube heat exchanger, stainless steel * Automatic low-temperature safety cut-out (compressed air required) * Juice pump, stainless steel * Chassis with mountings for low-temperature cut-out and pump ##### RINK – Pasteurising systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Technical specifications: - Rated capacity: 2000 L/h - Power requirement: 0.5 kW, 230 V, 6 A, single phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 550 x 1075 x 350 mm - Weight: 50 kg - IP65 electronics Kjdofhb I Hopfx Abxelu - Stainless steel pump with food-grade rubber scrapers - Fully automatic - Connection: DN 65 - Minimal maintenance - The machine can be operated either fully automatically or manually. - Compatible with all Maurer presses.

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Electrical equipment: 400V/50Hz with CE-compliant safety circuit and motor brake The jointer tables fold to the rear, allowing for space-saving installation Integrated, foldable chip extraction hood, connection diameter 120 mm Kjdpswzzyuofx Abxelu The infeed table is adjusted via parallelogram linkage Both jointer tables are equipped with noise-dampening table lips Precision ball-bearing cutter block with reversible knives Thicknessing table with central column guide and support Adjustable helical infeed roller for optimal planing results Technical data: Jointing width: 410 mm Table length: 1800 mm Table height: 850 mm Cutter block speed: 4,500 rpm 4-knife cutter block Cutter block diameter: 100 mm Jointer fence tiltable: 90 - 45° Max. depth of cut: 5 mm Motor power: 4 kW Thicknessing: Thicknessing table length: 700 mm Planing width: 405 mm Clearance min./max.: 3 - 225 mm Max. depth of cut: 5 mm Feed speed: 8 m/min Net weight: approx. 420 kg Space requirement: 1800 x 850 mm Availability: short-term Location: Röllbach

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Napetost 400V 3~ 50Hz 7,22kW Krmilna plošča z LCD-prikazovalnikom in tipkovnico Lepljilni agregat z 2 protismerno vrtečima diamantnima rezkama Naprava za zaokroževanje robov za čelne stranice Ročna nastavitev agregata Kedpfx Asyf I T Uobxjlu Debelina robnega traku 0,4-5,0 mm (opcijsko 8 mm) Višina obdelovanca 8-60 mm Podajalna hitrost 11 m/min 3 prosti mesti za zaključno obdelavo agregatov Dovajanje robnega traku za rolo in trakasti material Strgalo

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: Werksüberarbeitungsnummer: WÜAF25T68109, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), največja širina rezanja: 1.000 mm, premer žaginega lista: 315 mm, dolžina rezanja (maks.): 3.200 mm, F25 Basic Equipment - Manual height and tilt adjustment (0 – 46°) of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at a single speed, 4,200 rpm - Double roller sliding table, table length 3,200 mm - Mitre fence, crosscutting up to 3,450 mm - Maximum saw blade diameter 315 mm, maximum blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° Kljdpewwv Rmofx Abxju - Machine height 880 mm Equipment Package Type 6 - 5.5 kW (7.5 HP), 2 speeds - Rip fence, 1,000 mm - Riving knife (with extraction) - Scoring unit preparation

Stanje: novo, Leto izdelave: 2025, Cutting length: 2500 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Kljdpfsqx Igqjx Abxsu Motor power: 9.2 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800 mm Weight: 800 kg