Posebna enota zgoraj

Rex Aggregat 18,5 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment Ppodpfeylmmmex Altew • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: zelo dobro (rabljeno), Direct drive Airflow rate: 12,000 m³/h Vacuum: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Discharge diameter: 400 mm Ppjdoh Tfqhepfx Altjw Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Technical specifications and prior sale subject to error. • Stated prices are ex-works, loaded onto transport free of charge. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw Ppodpfxeg D Ugks Altsw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, Čelilna spajkalna linija za lesene pakete dimter HK 400 čelilna spajkalna linija Ppodpfx Alsvi Hw Notew Vhodne dolžine: 800–6.000 mm Višina rezkanja: 285 mm, opcijsko 300 mm Barva: modra Sestavljena iz: Poz. 01 Paketiranje Poz. 02 Valjčni transporter za pakete Poz. 03 Centralni rezkar Poz. 04 Valjčni transporter za pakete Poz. 05 Posamezno ločevanje paketov Poz. 06 Verižni prečni transporter Poz. 07 Oskrbujevalni valjčni transporter Poz. 08 Ciklična stiskalnica Poz. 09 Potisna enota Poz. 10 Krožna žaga za obrezovanje Vključno z električnimi omarami in upravljalnimi pulti Linija potrebuje popravilo in se prodaja v trenutnem stanju. Že je demontirana in skladiščena v kraju Achern. Na voljo je vsa tehnična dokumentacija. Za vprašanja o liniji in tehnično svetovanje smo vam vedno na voljo. Pri popravilu in montaži vas bomo strokovno podprli.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dozirni in nanesni sistem Hydrotop 1 E400R + Ecotac_C za enostransko nanašanje 1K PUR lepila na grebenske spoje za paketni klinasti spojni stroj. Nanos lepila na klinaste spoje. Nanos lepila za klinaste spoje. Zelo dobro stanje, preizkušeno delovanje. Podpfxsul Shno Altspw

Stanje: rabljeno, Leto izdelave: 1996, Barva: Siva Cena: Po dogovoru Dvostranski skobeljni stroj REX HOMS 630 Serijska številka: 16831 380 V, 102,6 A, 67,5 KM Opremljen s 3 skobeljni valji 1. spodnji 15 kW 2. spodnji 11 kW 3. zgornji 18,5 kW Maksimalna širina obdelave: 630 mm Min.-maks. višina obdelave: 10–310 mm Maks. odvzem ostružkov zgornji valj: 15 mm Maks. odvzem ostružkov spodnji valj: 10 mm Ppjdpfxewng Ike Altsw - Leto izdelave: 1996 - Dokumentacija na voljo: Ne - CE-certifikat: Ne Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetnike Dostava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Ppedpfx Ajn Hwl Ajltew Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: 22062, Pallet lifter / Pile hoists – Stack Lift Baumann NUP 1600 Year of manufacture: 2005 – Serial No. 52970 Maximum format / size: 1500 x 1185 mm Maximum lifting capacity: 1600 kg Maximum lifting height: 1400 mm Online video inspection via Skype video available. We would be delighted to welcome your visit – further machines in stock. Ppedpfx Aoip Etxjltsw Immediately available – inspection possible. Located in Emskirchen / Nuremberg – test runs possible.

Stanje: kot nova (razstavni stroj), dolžina podajanja os X: 800 mm, širina skobljanja: 800 mm, Dvostranski skobelni stroj. Zelo dobro delujoče stanje. Pedsx Rrykspfx Altepw

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, WORKING DIMENSIONS 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER PACK MOTOR 20 HP PRESSING FORCE 40T Ppodpfxew E Etyo Altow MAXIMUM WORKING SECTION 250x150 mm OUTFEED ROLLER CONVEYOR NOT INCLUDED