Enota za prečno pomikanje

Rex Pinneberg

Stanje: rabljeno, Cena: Na zahtevo Dvoranski žerjav Abus Nosilnost: 6300 kg Višina dviga: 7500 mm Razpon: 19000 mm Fodpfxowh Niqs Afleft Skupna teža žerjava: +/- 4000 kg Po želji žerjav razstavimo in pripravimo za transport. - Dokumentacija na voljo: Ne - CE certifikat: Ne Finančne informacije DDV: Cena je navedena brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkupi možni kadarkoli za vse iz industrije Lukas van Rossum

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Ffjdpfshw Ng Iex Aflot Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Leto izdelave: 1977, Stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Ffsdsd N Rb Dspfx Aflet Available immediately.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, equipped with spray unit. Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Outfeed device: Av 21 CSMA 540 Outfeed: SE separating conveyor Drive power: 4 x 132 kW Ffedpewww Iyefx Afljt Feed rate: up to 150 m/min

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Fodpfx Ajh Ayyqsflsft Technical information subject to correction.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Fjdpfefg E Hlsx Aflsft Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 2001, obratovalne ure: 123 h, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Fodpfeftdv Usx Aflsft Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° Ffsdpfsdfgg Ijx Aflst C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: rabljeno, Double edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Prices subject to change without notice. Errors and misprints excepted. Ffjdpfovr I H Dsx Aflot

Stanje: rabljeno, Cut Thickness Calculator for Band Sawmill Cutting Thickness Computer Alternative to Mudata control system with option for individual customization Industrial Touch PC Siemens Simatic S7 Compatible with rotary encoder or other measurement systems Fodsiwaxnopfx Afleft Cutting programs can be easily modified Cutting programs can also be grouped Software is customized according to customer requirements Operation possible via touch display or keyboard Next step in the cutting program can be triggered by button on the joystick All relevant values can be displayed individually on the display (e.g. total distance, next cut, complete cutting program, value of previous cut, feed rate, and more) All parameters can be displayed and modified on a dedicated parameter page or on the main screen The sensor for blade deviation monitoring can be evaluated (possible linkage with feed rate) Positioning via proportional valve and hydraulic motor or via stepper motor Inspection during operation is also possible on request Currently in operation on Primultini SGA 1300 CEB Suitable for any carriage size and any make For an appointment or further details, please just call.