Nakladalnik

RBO WINNER C

Stanje: rabljeno, številka stroja/vozila: 006107, Položaj 1: Nakladalnik RBO-WINNER C Ncsdjwuch Topfx Aamsw Položaj 2: Obratnik plošč RBO-WINNER C Položaj 3: Obratnik plošč RBO-WINNER C Položaj 4: Razkladilnik RBO-WINNER C

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Nsdjtwba Sspfx Aamjcw Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Ncjdpoflc T Sofx Aamow Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Operating capacity (cycles/min) approx. 16-20 Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) Nedpfx Ajd Rg Dpoamecw No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: skoraj kot novo (rabljeno), Inline folie-sealer en krimptunnel Nodjg D Nv Tepfx Aamocw Merk: Kallfass Type: semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Doorvoerbreedte x Doorvoerhoogte: 1600 (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V + N + E, 65 kW Staat: In de huidige staat, werkend

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates Nedod Tyvxepfx Aamocw - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: dober (rabljeno), Koda: 0158 Znamka: ITALPRESSE Model: LOCK FORM SYSTEM AIR – CE standard Hidravlična membranska stiskalnica na zračni pogon z avtomatskim nalaganjem in razkladanjem – v skladu s CE standardom 3D laminacija furnirja na eni strani plošče, ki so oblikovane ali profilirane na eni in ravne na drugi strani, za proizvodnjo dvignjenih panelov vrat omar, čelnih plošč predalov, pisalnih miz, jedilnih miz, kuhinjskih pultov ipd. 3D površinsko lepljenje plastičnih folij (PVC, PPE, ABS, prenosne folije) na plošče, oblikovane ali profilirane na eni strani, za izdelavo: vrat omar, čelnih plošč predalov, pisalnih miz, jedilnih miz, kuhinjskih pultov, trgovinske opreme, notranjih vrat itd. Dimenzije plošče mm: 2650 x 1250 Nedpfx Aaopvk Dijmocw Višina obdelovanca mm: 55 Manometer za kontrolo tlaka Samodejna ponastavitev tlaka Časovnik odpiranja

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Nodpfx Aolwqrtjamocw Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 Ncedpfoidqf Rex Aamsw The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); Njdped Nviqjfx Aamocw - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor