Sistemi za nakladanje in razkladanje

RBO WINNER C

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Operating capacity (cycles/min) approx. 16-20 Dkedpfjflc T Ssx Aflsg Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: rabljeno, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO Dodpfjvtpciex Aflskg This sandwich panel production line is designed to manufacture door and wall panels up to 610mm wide with an annual output capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Top Sheet Processing Section - 10 T top decoiler with coil car - Roller and pinch pass - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative pattern - Upper roller former (12 stands) - Upper forming mill steel frame - Upper sheet guide 2. Bottom Sheet Processing Section - 10 T bottom double decoiler with coil cart - Polyethylene film applicator - Corona treatment machine - Embossing machine - Bottom roller forming machine (12 stands) - Rolling conveyor - Entry line operator desk 3. Panel Formation Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Discharge roller conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roller forming tools - Lower roller forming tools 6. List of Additional Machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Dkodpsd Rg Dpsfx Aflsg Installed power: 23.3 kW

Stanje: dober (rabljeno), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Dedod Tx Ahspfx Afljkg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable Djdscggy Sepfx Aflskg - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: Dsdpfx Afsgp Diaslokg a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. Dkjdpjdfgg Ijfx Aflsg B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Dksdpfx Aofi Tg Hsflog Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Double-edger and trimming circular saw with electronic control, comprising: RET straightening and feed table. Chain bed in front of the machine with a liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, with electronic positioning control offering the following setting options: stepless, 1 cm indexing, and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. Dkjdpfxown D Izs Aflsg 10 variable preset dimensions, direct input of dimensions in mm. Constant dimension allowance, shrinkage allowance in percent. Splitter wedge pair: 1 x at zero line, 1 x hydraulically adjustable separately, with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electric switch cabinet with power section and PLC control. Operator console. Slat sleeve, clamping length 403 mm. Adjustment and zeroing sleeve. Professionally dismantled and loaded free on truck.

Leto izdelave: 1980, Stanje: dober (rabljeno), Stellite Tipping Machine VOLLMER GF10U Dksdpfx Afegxb Ebslsg Blade thickness: 1 to 4 mm Band saw blade width: 60 to 420 mm Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor