Stenska linija

Randek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Sistem za prešanje strešnih nosilcev na prodaj – komplet z mizami in dvižnim žerjavom Na prodaj sistem za prešanje strešnih nosilcev z vso opremo – hidravlična preša, montažne mize in mostni žerjav. Stroj je v zelo dobrem tehničnem in vizualnem stanju, popolnoma delujoč in pripravljen na takojšnjo uporabo. V kompletu: -Hidravlična preša za strešne nosilce (največji pritisk do 242 bar) -Montažne in stiskalne mize za izdelavo strešnih nosilcev -Mostni žeravni sistem z upravljanjem -Električna krmilna omara in varnostne komponente -Označeno s CE Proizvajalec: RANDEK (Švedska) – vrhunska profesionalna oprema za proizvodnjo lesenih konstrukcij Dodatne informacije: -Oprema je bila redno vzdrževana -Brez dodatnih naložb -Primerno za majhno in srednje veliko proizvodnjo -Možen ogled na lokaciji Ksdpfx Afox U Sncs Nsll Za dodatne informacije prosim kontaktirajte.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping Kodpju D Amgjfx Af Nsll - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: novo, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: Kjdpfe Nn Hysx Af Noll • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Randekov sistem za izdelavo nosilcev NT proizvaja strešne nosilce z uporabo C-stiskalnih glav, premičnih magnetnih pritrdilnih elementov na jeklenih tleh in enega izmed naših številnih žerjavnih sistemov. Kjdpfx Aexwkuqof Njll Žerjavni sistemi: - Stenski žerjav - Stebrni žerjav - Motorizirana mostna dvigalka - Protiutežni žerjav Stiskalna glava: 23T, 27T, 35T, 50T Laserski sistem na voljo kot opcija.

Stanje: pripravljen za uporabo (rabljen), Einlauf für Rundholz mit Wurzelreduzierer und Entrindungsmaschine. Folgende Komponenten sind enthalten: Klsdpfx Aetrd Hfsf Njl - Rundholz-Zuführtisch mit Vereinzelung und Sortierstation (Rundholzentschäler und Rundholzeinzugsförderer) - Wurzelreduzierer Typ Bruks RR1000 - Entrindungsmaschine Typ Cambio 70-66 - Auslauf-Förderband für Rundholz mit Holzabstoßer

Stanje: novo, Randek SPL728 Cut-Off Saw Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter saw jobs manually. This minimizes disruptions in production flow. Saw blade: - Carbide-tipped, low-noise - 700 mm diameter / 116 teeth - 360° horizontal swivel - 90° to 28° tilting - 250 mm plunge depth Motor power: 7.5 kW. Automatically closing and locking safety guard made of plastic. Kledpfx Asfg Tatef Njl Infeed table, available in lengths of 4.0 / 5.8 / 8.2 / 10.6 m Powered infeed roller, type IRO4-120. Transport rollers: 76 mm diameter, 400 mm roller length, 500 mm center-to-center spacing. Rear fence: 120 mm. 2 pneumatic hold-down devices. Feed direction: optional from left or right. Outfeed table, available in lengths of 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m Computer-controlled roller conveyor type LX. Guide roller for outfeed: rollers 76 mm diameter, 400 mm long. Rear stop 120 mm. 2 computer-controlled longitudinal stops, belt-driven. Stop 1 - designed for cut lengths down to 50 mm. Stop 2 - traverses the full length of the outfeed table. Positioning of longitudinal stops and adjustment of cutting angles are computer-controlled independently. Maximum travel speed of longitudinal stops: 1 m/s. Wood infeed: 1 unit Return devices: 2 units Feed direction: configurable from left or right.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza s stiskalno napravo in napravo za postavljanje Ksdpfjx Tdtnox Af Nsll

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, Essentially consisting of: feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening unit, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet integrated in container, storage silo, dust suppression system. Kodpfx Aoq Tcmvef Njll

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 113738AB, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 5.800 mm, hitrost pomika os X: 44 m/min, največja višina reza: 250 mm, premer diska: 700 mm, širina rezila žage: 700 mm, RANDEK SPL728 je industrijska, CNC-krmiljena prečna žaga, zasnovana za natančno obdelavo konstrukcijskega lesa. Stroj je prilagojen za neprekinjeno in zahtevno proizvodno okolje ter zagotavlja visoko natančnost reza in stalno kakovost vsakega obdelovanca. Žaga omogoča izvedbo ravnih, poševnih in kombiniranih rezov, zato je še posebej primerna za proizvodnjo strešnih nosilcev, lesenih okvirjev in montažnih gradbenih elementov. Integriran krmilni sistem z grafičnim zaslonom na dotik operaterju omogoča jasen prikaz obdelovanca, kar bistveno zmanjšuje tveganje za delovne napake. Kodjx Nhhbspfx Af Noll RANDEK SPL728 podpira uvoz podatkov o rezu iz CAD-sistemov prek ASCII-datotek in se lahko enostavno vključi v omrežje podjetja. To omogoča učinkovito obdelavo zahtevnih seznamov rezov, hitre pripravljalne spremembe ter optimiziran proizvodni tok. Stroj je zasnovan s poudarkom na natančnosti, zanesljivosti in varnosti upravljavca, zato zagotavlja stabilno pozicioniranje materiala med rezanjem ter kakovostne in ponovljive rezultate reza. RANDEK SPL728 je zanesljiva rešitev za proizvajalce, ki iščejo profesionalen, vzdržljiv in zelo učinkovit sistem za razrez lesa.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Kompaktna linija za proizvodnjo odprtih in zaprtih stenskih elementov. Dolžina stene: 8400 - 1800 mm Kledpfx Asfg Tb Ssf Nel Višina stene: 3300 - 2100 mm - Miza za okvirjanje - Randek Bridge - RB3 (CAD vodeno) + vključuje 4 orodja. - Obratne postaje z obratno funkcijo za izdelavo zaprtih panelov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, RANDEK forgó keresztvágó fűrész Kjdpfx Afevryhge Nell

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija / miza za stenske in strešne panele / elemente. Klsdpjxq Rrcefx Af Njl Od nove skoraj ni bila uporabljena. Še vedno je kot nova in deluje brezhibno. 1 kos Randek BS10u z nagibom 80 stopinj in 2 kosa miz BS05. Pnevmatska pritrditev / primež ter pnevmatsko dvižni valji za lažje premikanje stene. Dolžina: 9 m vsak Dimenzije stene: od 225x900 cm do 365x900 cm Nakupna cena leta 2022: 850.000 SEK = približno 80.000 EUR Cena je brez DDV.

Stanje: rabljeno, Prodaja poteka zaradi insolventnosti. Celoten obrat je bil kupljen leta 2021 in je bil v obratovanju le približno 3 leta. Znamka: Randek (Švedska) Letnik: 2021 1. Žaga Tip: SPL 728 X04 Krmiljenje: Beckhoff, zaslon na dotik Jeziki: glej fotografije Kot žaganja: 0°–360° Kljdpjxqpqkofx Af Nol Poševni rezi: 90°–28° Maks. debelina materiala: 250 mm Premer žaginega lista: 700 mm Moč: 7,5 kW 2. Dovozišča enota z razkladalno napravo, desno Tip: UV130F2X05 Dolžina: 13 m Dvižna miza: 4.000 kg 3. Odvozišča enota s strojijočim napravom, levo Tip: IH106F1X01 Dolžina: 10,60 m Dvižna miza: 5.500 kg 4. Tiskalnik etiket Znamka: ZEBRA Skupne mere obrata približno: Dolžina 24 m x širina 3 m

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, For sale: Complete sawmill operation The line starts with a Bongioanni band saw and a Costa Multiprisma saw. Designed for processing both soft and hardwood deciduous species. The price includes the entire machinery lines, auxiliary equipment (such as dust extraction and waste recycling machines), all necessary saw blades and spare parts. The sawmill can be inspected in Cegléd, Hungary by prior appointment. 1. Production Line: Kljdpfxjv Hm T Se Af Nol - 1-1 Log yard with log singulator - 1-2 Costa Multiprisma 280: twin-shaft canting and log rotator, throughput 60-80 m³/8hrs depending on wood type and diameter - 1-3 Roller conveyor with ejector - 1-4 Custom-built cross-cut saw: single sizing with adjustable cutting sizes - 1-5 Belt conveyors for bulky waste transport - 1-6 Drum chipper - 1-7 Chipper conveyors: screw conveyor, bucket elevator, chute, direct loading onto trolley/truck 2. Second Line: - 2-1 Log storage with singulator - 2-2 Log conveyor with ejector - 2-3 Intermediate log yard with singulator - 2-4 Bongioanni log band saw with carriage, 1300mm, digital control, pre-set size options, blade deviation indicator, laser guide, 25-45 m³/8hrs (depending on wood type, diameter and sawing pattern) - 2-5 Roller conveyor with ejectors - 2-6 Cross transfer conveyor with singulator - 2-7 Storti TGS-78 cross-cut saw: digital control, three saw units for double-size cutting ability - 2-8 Roller conveyor with grading sections - 2-9 Intermediate cant storage - 2-10 Roller conveyor - 2-11 Costa Leopard II edger, 2-shaft with automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Belt conveyors for bulky waste - 2-14 Drum chipper - 2-15 Chipper conveyors: screw conveyor, bucket elevator, walking floor for truck loading 3. Auxiliary Equipment: - 3-1 E. Gillet resaw, with conveyors, manipulator, and infeed unit - 3-2 Joinery bandsaw (800 mm) - 3-3 Pallet block cross-cut saw (star wheel type) - 3-4 SOCOLEST Valdoi twin edger circular saw with conveyors and cross-cut circular saw - 3-5 VEB STANDARD single-shaft panel saw - 3-6 STVO single-shaft panel saw

Stanje: novo, Leto izdelave: 2025, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Kedpjd Arwhjfx Af Noll Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator