žaga za rezanje pod kotom

R. Beck UTK 600

Stanje: novo, Leto izdelave: 2024, Under-table Crosscut Saw UTK-600 Codpfjf Sqy Dox Afnopw with vertically positioned front safety shield – pneumatically adjustable up/down incl. saw blade Manufactured in accordance with the latest PLC safety controls limited by the new Machinery Directive Technical Data: - Motor power: 7.5 kW S1 - Max. saw blade diameter: 600 mm - Saw blade bore: 35 mm - Cutting cycle time: 4 sec. per stroke - Saw spindle speed: 2,800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction ports: 2x120 mm, 1x100 mm - Operating pressure: 7–8 bar - Net weight: approx. 520 kg - Required air flow: 1,000 m³/h - Voltage: 400 V / 50 Hz, 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard features include: - Pneumatic saw blade feed drive - *NEW Two-hand PLC safety control system - Automatic motor brake - Set of service keys - Emergency stop push button - Adjustable saw blade feed speed controller - Fixed vertical safety guard - Upper pneumatic safety pressure device (safety hood) - Extraction speed minimum 28 m/sec. - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, safety shield and hood zinc yellow RAL 1018

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri. Cedpfxehclffe Afnepw

Stanje: pripravljen za uporabo (rabljen), For turning plates, discs, or bowls up to 250 mm diameter. Machine equipped with vacuum clamping. Cpoderh Hntopfx Afnow

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available - Cpsdocqvhwspfx Afnjw

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • V skladu s standardi CE. Cpsdpfx Aeramrzofnsw • Namenjen za rezanje aluminijastih in PVC profilov. • Hidro-pnevmatsko rezanje. • Prilagoditev hitrosti rezanja glede na profil. • Možno rezanje pod fiksnimi koti desno in levo: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 stopinj. • Pnevmatski vertikalni in horizontalni stiskalec. • Aluminijasta žaga z diamantno konico Ø600 ali Ø650 mm. • Na voljo valjčni transporter (3 metre desno in levo). • Sistem za pršenje olja. • Natančno rezanje zahvaljujoč 3 kW motorju in Hydro-check systemu. • Možnost dela z digitalnim merilcem.

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Cpodpjd Szf Nofx Afnjw Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Cpedevwfqqspfx Afnow Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: zelo dobro (rabljeno), Gold-anodized plates Working dimensions 2.5×1.1 m Electric heating Fully functional, tested Csdpfx Afou I N D Honepw You can call or write to us. We speak and write German and Russian. You can also send messages in English. 31.3.5

Stanje: novo, Leto izdelave: 2023, moč: 7 kW (9,52 KM), širina skobljanja: 520 mm, število rezil: 4, skupna masa: 483 kg, vrsta nastavitve višine: električni, premer gredi skobeljnika: 120 mm, višina skobljanja: 240 mm, SCM MiniMax s 52es Thickness Planer Specification: • Condition: New • Manufacturer: SCM • Planer table width: 520 mm • Planer table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock: 4 conventional knives • Cutterblock diameter: 120 mm • Cutterblock speed: 5000 rpm • Maximum planing width: 520 mm Cedpfxoqu U Dno Afnjpw • Feed speed: 5 / 8 / 12 / 18 m/min • Extraction port diameter: 120 mm • Weight (net): approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional Information: • Factory new machine • Actual item condition shown in the pictures • Possibility to test and inspect the machine on-site • Price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of manufacture: 1999 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Cpedpfx Asd Nmdkofnsw Notes: Machine: VG TYPE F-300-COMBI/CE Year of manufacture: 1998 Category: Through-feed grinder Location: Gorzów Wielkopolski Delivery terms: Collection by buyer Delivery costs: Covered by buyer Commissioning: To be agreed Through-feed sander VG TYPE F-300-COMBI-CE / 1998 - Machine from the Combi series - Contact roller and pad sanding - Pneumatic oscillation and mechanical belt tensioning - Motors: 7.5 + 1 HP / 380 V - Sanding belts: 300 x 1900 mm