Hladna žaga

ProfiFeed Technologies S200 Semi-Automatic Steel Saw

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting Parameters Dsdpfx Afji D Dgwjleul Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Leto izdelave: 2022, Stanje: novo, Stroj ZIM T 1210 je zasnovan za povečanje učinkovitosti pri proizvodnji jaškov, stožcev in obročev. Njegova proizvodna zmogljivost je zelo visoka v primerjavi z običajnimi stroji. Ima edinstvene tehnične lastnosti za povečanje kapacitete, življenjske dobe in kakovosti izdelkov. Stroj lahko proizvaja cevi s premerom od 300 do 1200 mm in višino 1000 mm. Stroji so lahko zasnovani kot polavtomatski ali popolnoma avtomatski, glede na zahteve kupca. Na avtomatskih strojih uporabljamo PLC mikroprocesorje znamke SIEMENS. Na stroju sta rezervoar za malto in voziček za polnjenje malte. Za voziček za polnjenje malte uporabljamo interni sistem polnjenja, ki omogoča enakomerno in hitro polnjenje v modele. Dujdpoirtdpefx Aflel Proizvodnja poteka na proizvodnih paletah, ki morajo počakati, da se izdelki posušijo, kar traja približno 24 ur, če ni vgrajen sistem sušenja/utrjevanja. Vibracijski sistem stroja je nadzorovan s frekvenčnim pretvornikom. Mehanske nastavitve niso potrebne; vse nastavitve se lahko enostavno izvedejo na upravljalni plošči. Vibratorski sistem, katerega razvoj je plod našega lastnega R&D oddelka, je vgrajen v naše stroje. Hlajenje vibratorjev poteka s pomočjo oljnega krožnega sistema, ki ga nadzorujejo posebni senzorji. Ta tehnologija omogoča, da naši stroji že vrsto let delujejo brezhibno in se odlikujejo z nizkimi obratovalnimi stroški. Posebno ojačano ogrodje stroja zagotavlja dolgo življenjsko dobo in brezhibno proizvodnjo. Proizvedeni materiali se lahko prevažajo na sušilno območje z vozički ali viličarji.

Leto izdelave: 2013, Stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Dujdpfod Izmasx Aflsl Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Metric Capacity at 90°: 530 x 530 mm Min. cutting length: 40 mm Max. cutting length: 17 - 110 mm Power: 12 kW Chip conveyor: Yes Dimensions (approx.): Length: 4000 mm Width: 2250 mm Height: 3270 mm Weight: 4400 kg Duedsu U Naropfx Aflol Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are to be inferred. We recommend verifying all key details.

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Dedpotv H Ucofx Afloul Spindle speed: 25 - 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total power consumption: 35 KVA Machine weight: approx. 10 t Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault.

Stanje: kot nova (razstavni stroj), Grape Pomace Conveyor by SMB Spezial-Maschinenbau, designed for loading presses with fermented mash as well as for removing stems or pomace. Curved conveyor belt with sidewalls, belt width approx. 400 mm, belt length approx. 2,600 mm, equipped with an attached incline conveyor, conveyor height approx. 1,600 mm, stainless steel frame (with castors). Dodpfx Aohrzaasfljul

Stanje: rabljeno, Leto izdelave: 2007, Behringer HBM 540 A Automatic Bandsaw Year of manufacture: 2007 Working area, flat: 630x540 mm Dodpfowi Ii Sex Afloul Round: 540 mm Saw drive motor power: 11 kW Cutting speed: 20–200 m/min 2 powered infeed roller conveyors, each 6200 mm length, 1200 mm width, with cross-shift Powered outfeed roller conveyor, 5030 mm Chip conveyor This offer is intended exclusively for commercial customers as defined by §14 BGB. No sale to private individuals.

Stanje: novo, Leto izdelave: 2025,

Stanje: novo, Leto izdelave: 2025, The CORMAK H - 260 SA automatic column band saw is a highly efficient machine designed for automatic-cycle cutting of bars, tubes, and profiles made from steel, cast iron, and non-ferrous metals. Its robust body and sturdy saw frame, combined with a column-type construction, ensure excellent rigidity and an exceptional level of stability during cutting, even when processing the most challenging metals. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. The saw offers the option to cut in both manual and automatic modes. Manual mode allows all operations to be performed directly from the machine panel. Automatic mode – once the machine is started, the entire cutting cycle, including clamping the workpiece in the vise, feeding it to the set dimension to the cutting blade, lowering the arm for cutting, and lifting the arm to the desired height after the cut, is performed fully automatically without operator intervention. Cutting parameters, such as the number of pieces to be cut, their dimensions, blade speed, and arm feed rate, are set via the control panel. The machine will stop automatically if the series is completed, the blade breaks, or the control system detects another malfunction. The machine’s body is a cast iron base mounted on a rigid, spatial frame chassis. Inside the enclosure, you’ll find the hydraulic unit, coolant reservoir with pump, and a chip conveyor. Dedpfx Asiz S I Heflsul The blade drive is powered by an inverter-controlled motor, delivering smooth speed adjustment across a wide range. Hydraulic blade tensioning ensures optimal working conditions for the band. If the blade breaks, the machine stops automatically. A cooling system and cleaning brush ensure maximum cutting performance and extend blade life. The hydraulic material feed system delivers a fully automatic work cycle. The control unit, equipped with an LCD display, allows programming of saw operations, signals end-of-material, communicates errors, and shows the number of parts cut after the programmed batch. The maximum material feed per stroke is 500 mm, with a feed accuracy of +/- 0.2 mm per stroke. The innovative design and manufacturing of CORMAK semi-automatic and automatic saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Motors are licensed from ABB, a globally recognized industry leader, ensuring long-lasting, maintenance-free operation. Technical Specifications - Cutting range: Ø260 mm or 260 x 260 mm - Blade size: 3150 x 27 x 0.9 mm - Cutting speeds: 40/60/80 m/min - Main motor: 2.2 kW - Hydraulic unit: 0.75 kW - Coolant pump: 0.09 kW - Feeder stroke: 500 mm - Load capacity: 1500 kg - Machine dimensions: 1600 x 1800 x 1550 mm - Weight: 1000 kg Maximum cutting range at 0º: ø260 mm / 260 × 260 mm Standard Equipment - Automatic working cycle - Arm position memory function - Integrated hydraulic unit - Vise position memory function - Adjustable cutting speed - Driven blade cleaning brush - Cooling system - Bi-metal band saw blade - CE declaration of conformity - Full technical documentation (in Polish and English) For more information, please visit our website.

Stanje: skoraj kot novo (rabljeno), Manufacturer: Parker Type: T / D RAPID 1.5 x 4 Dimensions: 1,500 x 4,000 mm Decks: 3 Djdpfx Afog Snulsljul