Podajalnik

PODAJNIK DO PIŁY/ STRUGARKI/ OPTYM

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Ledpfx Acouz If Njaorr Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Nadzor: ne Hecht ES 350, enostranska žaga za steklene profile ----- Nagibanje s pomočjo pnevmatskega sistema proti fiksnim oporami. 45º/90º/135º z pnevmatskim podajanjem žaginega lista Lrodpfx Acovpr N Roajr pnevmatsko nagibanje s pomočjo ročnega nagibnega sistema z osnovo stroja, pnevmatsko napenjanje Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala žage: dolžina 700 mm, globina 1600 mm, višina 1500 mm Nastavljiva opora 1,5 m Podpora 1,5 m s podstavkom Nastavljiva opora 3 m Podaljšek podpore od 1,5 m na 3 m s podstavkom Vložki mize z utori za obdelane steklene profile HECHT ASB, ročna dolžinska opora z digitalnim prikazovalnikom, 2500 mm Z napravo za odsesavanje (tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: rabljeno, Seti valjev za stroj za savijanje profila, 3-valjna stroj za savijanje prstenova HERKULES WETZLAR Valjci odgovaraju stroju za savijanje profila HERKULES WETZLAR tip BO 238 N Promjer osovine: 60 mm sa 18 mm utorom za klin 2 kompleta valjaka set br.1, promjer valjka 110 mm, širina valjka = 180 mm 2 kompleta valjaka set br.2, promjer valjka 160 mm, širina valjka = 40 mm 3 kompleta valjaka set br.3, promjer valjka 150 mm, za promjer cijevi Ø 33 mm, širina valjka 87 / 115 mm - Set br. 3 s adapter prstenom od Ø 93 na Ø 60 mm bez utora za klin Stroj ima 2 pogonska valjka Ukupna težina svih valjaka 57 kg dobro stanje Lrsdeglaq Ispfx Acasr

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding Turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Lredpfx Acoc Ug Tljaor Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via geared motor with hand crank, 0 - 90° Speed: 0.3 to 2.5 rpm Includes foot pedal remote control Optional extra: Quick-release chuck Diameter 300 mm, €450

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Lrodpfx Aew D Aq Tocasr Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 3253-80, Offer 22045 Technical Specifications (approx.): - Pressing force: 10 t - Throat depth: 150 mm Ljdpfx Aektg Dhecaerr - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Through-hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram area: 240 x 150 mm - Ram bore diameter: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Stroke rate: 130 strokes/min - Hydraulically operated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Space requirement approx.: W 1000 x H 1800 x D 1100 mm - Weight approx.: 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Max. bar diameter 65 mm Max. bar length 3000 mm Lrodoin Hkmjpfx Acajr

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1700 / 3400 rpm Controller: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw Ledsxaa Hnopfx Acajrr * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control * user-friendly interface with display and mechanical buttons * saw head start and end positions can be stored - Manually operated safety guard - Mechanical stops at -45°, +0°, +45° * enable rapid positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows adjustment of clamping pressure * pressure depends on the hardness of material being cut * optional pneumatic vertical vice available - Heavy cast iron construction ensures vibration-free operation and high precision - Saw head can be tilted up to 45° additionally - 2 saw blade speeds - Machine base with lockable door - Pneumatic coolant-lubrication system - Machine base Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Adapter for feed roller conveyor, incl. 1 support roller - Tool kit - Comprehensive operating instructions, maintenance manual, etc. - Machine is supplied without saw blade!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna širina: 480 mm, skupna dolžina: 6.000 mm, gradbena širina: 405 mm, gradbena višina: 700 mm, razmak osovin: 100 mm, EasySystem powered roller conveyor, in as-new condition, multiple units for sale 480x6000 Powered roller conveyor with aluminium frame, in as-new condition, several units available from stock. The conveyor system is modular/classifiable. Lsdpfx Aoukgduecasrr Manufacturer: EasySystem Total conveyor width: 480 mm Roller width: 405 mm Roller diameter: 50 mm Roller pitch: 100 mm Total track length: 6000 mm Track height: 700 mm (adjustable legs – max. +/- 80 mm) Drive: Electric motor with NORD gearbox Power: 0.37 kW, 1.89 A, 230/400 V Conveyor speed: approx. 30 m/min Optionally, a NORD frequency inverter can be purchased, enabling stepless speed adjustment.

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Število hodov na minuto: 160 min-1 Lrsdpfxew Tukis Acajr Potreba po moči: 2,2 kW Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t