Dvojna osna prečna žaga

Pertici Haffner DGS180

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina žagine plošče: 40 mm, Oprema: dokumentacija / priročnik, Krožna žaga za vzdolžne in poševne reze Tip: ZS 170N Motor: 400 V / 2,0 kW Hitrost vrtenja: 3500 obr/min Nsdpoypwhpefx Al Djdb Dolžina reza: 410 mm (pri 90°) Višina reza: 170 mm (pri 90°) Območje poševnih rezov - horizontalno: 45°-90°-25° Območje poševnih rezov - vertikalno: 90°-45° (levo) Premer žaginega lista: 420 mm Premer odsesovalnega nastavka: 100 mm Teža: 120 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Ndjdpfx Aequ N U Dsl Deb Maksimalni tlak: 5 bar

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm Ndsdpoxraucsfx Al Djb ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) Ndedpjgwbbqjfx Al Dob No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Blade speed: 1,550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Max. blade length: 4,735 mm · Min./Max. blade width: 15 mm / 30 mm · Min./Max. blade width with special coating (optional): 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz Ndsdpfx Alow Nablo Dsb · Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Robust German engineering · Modern, attractive, torsion-resistant double-chamber welded steel frame · Top and bottom doors secured by limit switches · Upper and lower precision bandsaw blade guides APA 2, size 2 · Finely planed grey cast iron table · Table tiltable up to 45° · Dynamically balanced bandsaw wheels with vulcanised rubber tyres · Rip fence usable on left side of blade; fence profile foldable · Blade tension indicator · 1 pc. saw blade 4735 x 25 x 0.6 mm, tooth pitch 9 mm, No. 3780.250D · Mechanical blade guard height adjustment by handwheel with locking ratchet · From 2.2 kW – rotary cam switch with direct start and emergency stop button · From 3.0 kW – rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant incl. transport pallet incl. delivery to 65239 Hochheim Availability: short-term Location: Flörsheim

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Ndedpfx Aeuiwqhel Djb Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: Ndedsxwaz Hepfx Al Djb - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.000 mm, trajanje garancije: 12 meseci, skupna širina: 3.600 mm, skupna višina: 700 mm, DELOVNA MIZA ZA MONTAŽ LESENIH OKVIRJEV neposredna prodaja od proizvajalca BOOSTON MACHINERY TESARSKA MIZA; MIZA ZA MONTAŽO; MIZA ZA PREFABRIKACIJO Na voljo dolžine: 4,5 m; 6,0 m; 7,5 m; 9,0 m; 10,5 m; 12,0 m; 13,5 m; 15,0 m DIMENZIJE - delovna dolžina: 6000 mm (na voljo so tudi druge dolžine) - širina v standardni postavitvi: 3600 mm - delovna višina: 700 mm - Delovna miza za samostojno montažo - transport na veliki paleti (prihranek za vas) - Montažne odprtine za pnevmatske pritisne valje SD-01 - Možnost nadgradnje z dodatnimi moduli Nsdoyk H N Eopfx Al Dedb Dodatne možnosti: - pritisni valji SD-01 - možnost uporabe pnevmatsko dvižnih valjev za vodoravni transport (2 liniji valjev) - osnovni profil LS-01

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Nedpfx Aotrl R Ael Djdb Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pnevmatska stiskalnica za lepljenje lesa po debelini. TECHFA tip PTD 6000 Maksimalne dimenzije lepljenih elementov: - dolžina 6300 mm Ndsdpfxjyivr Ho Al Deb - širina 160 mm - višina 850 mm Stiskalnica razdeljena na 4 sekcije.