Linija za mikrospoj (mikropero)

FAMAD PDFD-I

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 5 h, Automatic single tenoning line for longitudinal jointing of wooden elements. The presented machine configuration enables achieving a maximum efficiency of up to 4,000 linear meters per shift. The use of a receiving table with automatic feeding of the battens onto the infeed conveyor of the PHSL press allows the line to be operated by a single worker responsible for feeding the material. The line operates in an automatic cycle with manual material feeding. Year of manufacture: 2008 Machine after overhaul, in very good technical condition. Polish-made machine. Technical Data: - Infeed width for tenoning/milling machine package: 600 mm - Width of laminated elements: 40 ÷ 155 mm - Length of laminated elements: 170 ÷ 900 mm - Thickness of laminated elements: 20 ÷ 70 mm - Operating air pressure: 0.6 MPa - Compressed air demand: 18 m³/h - Operating performance: 1.5 cycles/min - Length of bonded element: 6,600 mm - Working voltage AC: 3 x 400 V + N + PE - Control voltage: 24 V DC Gusdpjrpa Apsfx Ab Tek Installation and commissioning of the machine is available at additional cost.

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Godpjtq U A Isfx Ab Tsuk

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Guedpsvwdmwofx Ab Tjk

Stanje: novo, No. 3187 Vacuum Dryer / Drying Chamber ISVE ES 5 / NEW New machine, delivery time: 120 days Design features: Stainless steel AISI-304, partially insulated External diameter: 1,600 mm Cylindrical section length: 5,000 mm Dryer length: 5,900 mm Total dryer length with rails: 11,000 mm Max. operating vacuum: -730 mm Hg Stack length (wood): 5,000 mm Gedjvc Axpopfx Ab Teuk Stack width (wood): 1,100 mm Stack height (wood): 990 mm Net wood volume: approx. 5 m³ Installed electrical power: 16.01 kW Average hourly power consumption: 8 kWh Included: - 12 electric heating plates (each 1,100 x 5,000 x 10 mm LWH / 57 kg / 1.25 kW) - 2 internal condensers (turbofans, each 0.55 kW 380 V AC, with stainless steel pipes) - 1 check valve (one ¾” for vacuum circuit) - 1 solenoid valve for air recirculation (24 V AC: one 1” for autoclave) - 1 manual air recirculation (1” ball valve) - 1 electrical control unit (Siemens S7-1200 PLC with touch panel) - 1 ISVE Server Connect module for remote maintenance and operation - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measuring wood core temperature) - 2 plate holders - 1 operating manual (in English, with CE certificate and wiring diagrams) Transport dimensions approx. 5,900 x 1,620 x 2,300 mm LWH Weight approx. 2,900 kg Technical specifications, year of manufacture, and scope of delivery according to manufacturer, without guarantee Subject to prior sale For new machines, the manufacturer's warranty conditions apply Photos and videos are for reference only and may not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines WEINIG Godpfeiix Uvox Ab Touk Tenoning and slotting machine UNITEC 10, year 1997 Profiling and finish-milling machine UNIVAR 10, year 1997

Stanje: novo, Leto izdelave: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm • A-axis rotation: 360° Gedpfod Hz Nisx Ab Tsuk • Feed speed: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Oprema: kabina, Naprodaj: Popolna linija za žaganje hlodov Popolna linija za žaganje hlodov v odličnem stanju, idealna za strokovnjake v lesni industriji. Ta robustna in zmogljiva oprema vam omogoča optimizacijo proizvodnje. Tehnične podrobnosti: 23,5 m transporter za lubje Kapaciteta skladiščenja 30 hlodov na dolžini 16 m 5 postaj 4 obračevalci hlodov 5 preklopnikov Dvojno vodena vpenjalna glava za hlode z neodvisnim HIDRAVLIČNIM izhodom Funkcija poravnave za boljšo usmeritev hloda Gsdpfx Asxdc H Eeb Touk Močan in natančen vitel za optimalen nadzor 30 m izmetni valji s 4 izmetnimi mesti levo/desno Popolna kabina za upravljavca, odlično ohranjena Druge značilnosti: 140 okvir LBL luplik Nakladalnik Predžagalna žaga Hidravlični voziček s 5 postajami, znamke Gillet Popolna mehanizacija za povečano zmogljivost Za več informacij, fotografije ali dogovor za ogled nas kontaktirajte!

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Finger jointing line for wood GOMA FC-10 KZ6 Polish production Year of manufacture: 2002 Technical documentation with declaration of conformity TECHNICAL PARAMETERS: - Wood width min/max: 40 / 160 mm - Wood thickness min/max: 25 / 80 mm - Single glued section length: 6000 mm - Clamping force: 7500 kg / 100 atm SAW - Saw blade diameter: 300 mm - Motor power: 6 kW Gsdpfx Aet Sfz Iob Tjuk - Cutter (milling unit) power: 15 kW PRESS - Hydraulic pump power: 4 kW - Working pressure: 100 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 Guedpfx Aemgc I Nsb Tok - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, Guedpfx Abolu D Tfe Tok – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar