Strižno orodje

Peddinghaus für U-Stahl 30/60 mm

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. Iodpfx Aefxyhfsf Toal The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm Iodpfx Afopug D Es Tjal - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Stanje: dober (rabljeno), Leto izdelave: 1969, Pneumatic gluing press, Iedpfxed Dxqbj Af Toal Max. pressure: 10 bar, Heated gluing beams, Bonding area: 550 x 40 mm Continuously variable temperature setting for lower and upper gluing beam from 0 to 300°C, Continuously adjustable bonding hold time, Drive power: 5 kW, 380 Volt-50 Hz, Two-hand control by SIEMENS. Pressure build-up via toggle lever, Max. opening stroke approx. 30 mm

Stanje: dober (rabljeno), Plasma cutting unit, plasma cutter Iaedpfx Afob A Inns Tsl - Equipment: without torch package - Cooling: water-cooled - Maximum cutting current: 70 A - Mains voltage: 3x400V

Stanje: dober (rabljeno), Leto izdelave: 1995, Offer 24315 Technical Data: - Belt dimension: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° - 30° - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Contact wheel / grinding roller diameter: Ø 42 mm Ijdpfxet Stfhe Af Tsal - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. diameters: 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Stanje: rabljeno, Flat steel bender Glaser HAWE HC4L/3.0, hydraulic – see pictures Iaedpfx Afju Da Afo Tol

Stanje: dober (rabljeno), Thread cutting machine with steel jaws, thread cutting head - Chuck diameter: 190 mm - Size: 1/2 – 2 inches - Weight: 130 kg Iaedpfx Aob A Ncuef Tol

Stanje: pripravljen za uporabo (rabljen), Elgo CNC krmiljen stroj, zelo enostaven in prijazen za uporabo Maks. kapaciteta cevi: premer 76 mm x 4 mm debeline Maks. kvadratna cev: 70 x 70 mm Maks. polmer: 600 mm Kot upogibanja: 180° Standardno 3D orodje Posebna orodja na zahtevo Dolžina: 1200 mm Širina: 800 mm Višina: 1300 mm Iajdpoxpghqjfx Af Tjl

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 100 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (flat): 100 x 195 mm Cutting capacity at 45 degrees (round): 100 mm Cutting capacity at 45 degrees (square): 100 mm Cutting capacity at 45 degrees (rectangle): 100 x 135 mm Saw blade speeds: 2800 rpm Total power requirement: 1.5 kW Machine weight: approx. 250 kg Dimensions (L x W x H): 0.7 x 0.7 x 1.4 m NOTE: SPECIAL OFFER PRICE - Mitre cutting left/right 45° - Fixed stops at key mitre angles Iodpfxjupxaxo Af Teal - Pneumatic double clamping device - Safety motor brake - Complete with mist spray unit and machine base

Stanje: rabljeno, Druck: 250 t Iasdpe Du Trjfx Af Tel Blechlänge: 3250 mm Neue Hydraulik- und Elektroanlage