Roll-off kontejner

Other 23 cbm Rollplane Kornschieber enzianblau 6m

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Csdpfxshlp Efj Agqsgw

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Cgsdpfxst Hw Shs Agqjw Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Strip width: 600 – 2,000 mm Strip thickness: 6 – 15 mm Design: 4-Hi cassette Codpfx Agov S Ad Doqjgw

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: modra, moč: 80 kW (108,77 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, nazivna moč: 80 kW (108,77 KM), nazivna (navidezna) moč: 100 kVA, neprekinjena (navidezna) moč: 100 kVA, Rabljeni dizelski agregat – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Zaprt Tehnične specifikacije: Znamka: SES (Scandinavian Engineering Systems A/S) Model motorja: Volvo Penta TAD 520 GE Izhodna moč: 100 kVA / 80 kW Napetost: 400/231 V Cgedpfx Agowzimcoqsw Frekvenca: 50 Hz Obrati: 1500 Leto izdelave: 2003 Ohišje: Da (vključen zvočno izoliran zaboj – glejte slike) Hlajenje: vodno hlajenje Krmilna plošča: integrirana Stanje: rabljeno, v dobrem delujočem stanju Dodatne informacije: Nazivna moč motorja: 102 kW PRP (trajna nazivna moč): 94,0 kW Tip alternatorja: UC 274 D Popolnoma zaprt zaboj – primeren za zunanjo namestitev Redno vzdrževan Pripravljen za ogled in takojšnjo odpremo Fotografije na zahtevo.

Stanje: zelo dobro (rabljeno), stiskalna sila: 150 t, širina mize: 3.100 mm, Zum Verkauf steht: 1 gebrauchtes, hochwertiges und sehr gut erhaltenes Bystronic Xpert CNC-Abkantpresse 3 Meter x 150 Tonnen mit motorischer Blechauflage. Bystronic Beyeler Xpert 150×3100 Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Achsen insgesamt: 9 – Hinteranschlag 6-achsig: X1, X2, R1, R2, Z1, Z2 – sowie motorische vordere Blechaufrichtehilfe Hydraulische Werkzeugklemmung Freistehend, keine Unterflur-Grube erforderlich Kapazität / Biegelänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Allgemeine Informationen: Modell: XPERT150x3100 Baujahr: 2010 Cgedjttl D Njpfx Agqjw Technische Daten: Arbeitslänge: 3100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsvorschub: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Stanje: novo, Leto izdelave: 2023, Power (kVA): 650 Cgedpfxjwpgh Ho Agqjw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 42.300 km, moč: 180 kW (244,73 KM), prva registracija: 03/2007, vrsta goriva: dizel, gorivo: dizel, vrsta prenosa: samodejen, skupna dolžina: 7.350 mm, skupna širina: 2.500 mm, dovoljena osna obremenitev (os 1): 6.100 kg, dovoljena osna obremenitev (os 2): 8.000 kg, Leto izdelave: 2007, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena. Codeyxgnlepfx Agqjgw

Leto izdelave: 2026, stanje: novo, Vibrating Screen Machine Series ASM S&F vibrating and flat screens are used in a wide range of applications throughout the wood processing industry (sawmills, pellet plants). The "ASM" series screening machines are used to screen wood chips, wood pellets, sawdust, reclaimed wood, biomass, and many other sawmill by-products in both dry and wet processing environments. The gentle, horizontally circular screening motion of the inclined screen box ensures high separation efficiency of this vibratory classifier. One key advantage is that long and fibrous particles slide diagonally or tangentially over the screen surface. As a result, in contrast with throw screens, there is no risk of clogging or pegging. Further advantages include a robust design, high throughput capacity, and long service life with minimal maintenance requirements. In addition to standard sizes, the company also offers the "ASM" series as a customized split version for existing installations. This allows new screening machines to be integrated even where space is tight or access is restricted, such as in existing plants or sawmills. ASM screening machines provide screening areas from 0.5 to 15 m² (per deck) and are characterized by high throughput capacities (up to 350 m³/h, depending on material). At a glance: - Ideal for: wood chips, pellets, sawdust, biomass, bark, reclaimed wood, substitute fuels - Application areas: wood industry, recycling & disposal, animal feed - Screening area: 0.5 – 15 m² (up to 30 m² as a double-deck version) - Throughput (material-dependent): up to 350 m³/h - Separation size: 0.1 – 150 mm (dependent on machine size) - Drive power: 0.55 – 15.0 kW (dependent on machine size) Advantages: - High throughput - High separation efficiency - No clogging or pegging - Quiet and low-maintenance operation Cgjdein Ey Sjpfx Agqow - Versatile - Customized manufacturing Need more information? Contact us! We are happy to advise you.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AHL-50, kapaciteta rezervoarja: 50.000 l, 50,000 liters capacity, above-ground, made of steel sheet. Cgsdpfx Agsb Hpd Rsqew The tank complies with DIN 6616, is fitted with 2 saddle feet, an access ladder, and has been professionally drained and cleaned inside. Dimensions: L = approx. 10.70 m - D = 2.50 m The tank will be equipped with a brand-new internal plastic lining, including a leak monitoring device housed in a protective case (see sample photo). The plastic lining has a "General Building Authority Approval" and is therefore suitable and approved for storing liquid fertilizer (AHL) as well as NOx reduction agent AUS 32 (AdBlue). The exterior of the tank will be completely sanded, newly primed, and repainted in a RAL color of your choice. The price is ex works – free loaded. (Delivery can be arranged at a favorable additional cost.) Delivery time = by arrangement. Important: The tank shown (sample photo) is a refurbished 50,000-liter tank that has already been delivered to a customer. The shown plastic piping (PVC connection) is not included in the scope of delivery but may be purchased at an additional cost. You will receive an invoice with VAT indicated. The purchase is subject to our general terms and conditions.

Stanje: novo, Cefla sistem za lakiranje Cgsdpfjwhbrwsx Agqsw