Balirni stroj

ORWAK Compactor 3150

Stanje: rabljeno, Chambre de pressage - presse à balles ORWAK Compactor 3150, d’occasion 🧰 Caractéristiques du produit • Fabricant : ORWAK • Modèle : Compactor 3150 • État : Occasion, voir photos • Couleur : vert • Année de construction : 2024 • Dimensions : env. 1366 x 1001 x 2546 mm • Poids propre : 720 kg • Force de pressage : 50 - 80 kN • Temps de cycle : 40 secondes • Puissance : 1,1 kW (10A) • Tension : 230 V (monophasé) / 50/60 Hz • Niveau sonore : 62 dB • Poids des balles : plastique jusqu’à 190 kg, carton jusqu’à 150 kg 💰 Prix 3.900 € net hors TVA • Remises quantitatives : sur demande • Frais de livraison : Europe entière sur demande • Délai de livraison : disponible immédiatement Gksdpfx Absxvzthj Tof • Visite et enlèvement : possible à tout moment, sur rendez-vous Plus de 5.000 mètres linéaires de rayonnages à palettes de différents fabricants en stock en permanence (Sous réserve de modifications et d’erreurs dans les données techniques, les informations et les prix, ainsi que de vente intermédiaire ! Voir nos CGV, tous les prix hors TVA départ stock.)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, moč: 1,6 kW (2,18 KM), Certificirano po DGUV do: 12/2026, leto zadnje generalne obnove: 2022, skupna masa: 800 kg, Avtomatski delilni stroj za testo s tehtanjem Werner & Pfleiderer Model: Parta U Popolnoma avtomatski stroj za deljenje testa Delitev v območju: 300 do 2100 gramov Transportni trak: 725 mm Centralno mazanje Lijak: 170 litrov Mehanska nastavitev mase Izvedba iz nerjavečega jekla Kapaciteta maks.: 925 kosov/uro Stroj na kolesih z zavorami Samo pri nas preverjen DGUV V3 Priključek: 400V, 1,6 kW, vtič 16A-CEE Rabljeni stroj, očiščen in preverjen pri SAB Z jamstvom in servisom Gkodpfx Aet Sp Hbeb Tsf Možnost: Servisni paket Vzdrževalna pogodba E-Box Navodila in zagon Še veliko drugih TOP delilnikov testa na zalogi!

Stanje: pripravljen za uporabo (rabljen), HSM 155 VL Baler Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Gkjdpjra Nrmjfx Ab Tsf Bale weight: 200 – 250 kg (cardboard) Technical specifications: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Pressing force: 16 tons Price for HSM 155.2 VL baler – 2,800 EUR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH Gkodsvgrh Uspfx Ab Tof

Stanje: novo, Klanke Supercut roll slitter for efficient cutting of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical data: Knife length: 3000 mm Gkodpfxsn I Rgpj Ab Tsf Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 tons Made to order Price and further information upon request. We are happy to provide you with a non-binding quotation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Gjdovf E Avepfx Ab Tekf Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. Gsdpfx Aetvat Tsb Tekf It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Gkjdpogmh H Tjfx Ab Tjf The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Overband plate magnet Design: stainless steel (VA 1.4301), fully welded Including cleaning drawer 600 x 500 x 180 mm Fully welded housing Lifting lugs for suspension Gjdpjd Evl Ajfx Ab Tjkf