Oblikovalec površin OPTIMAT SOLID W520S

OPTIMAT SOLID W520S

Stanje: novo, Technical data: Working width: 1100 mm Hsdpfx Aogtm U Asgxjl Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm Hsdsd H Rf Tspfx Agxjl • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Hjderigxyepfx Agxol Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Hedodqzcxspfx Agxol Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: dober (rabljeno), Koda: 0299 Znamka: SCM Model: S 630/E - CE standard Avtomatski debelinski skobeljni stroj za mizarske delavnice, izdelavo pohištva po meri, lesena okenska okna, lesno mizarstvo, žage, plastiko, kompozitne materiale in razne druge namene - CE standard Tehnični podatki: Elektronska nastavitev višine mize Pnevmatska nastavitev pritiska valjev Pogonski sistem s 3 velikimi motoriziranimi zgornjimi valji - enostavno zamenljivi Elektronski variator hitrosti podajanja 4/20 m/min Dimenzije delovne mize: 630 x 1000 mm Maksimalna delovna širina: 630 mm Minimalna/maksimalna delovna višina: 3/300 mm Minimalna delovna dolžina: 260 mm Število nožev: 4 Motor: 7,5 KM Motor podajanja: 2 KM Premer sesalne cevi: 150 mm Hsdpjyi E T Tefx Agxsl Skupne dimenzije (mm): 1360 x 1080 x 1220 (v) Teža: 1000 kg

Stanje: novo, Leto izdelave: 2026, A550 Vollautomatische Massivholzsäge 9 m Vollautomatisches Schneiden von mittelgroßem bis großem Vollholz mit benutzerfreundlicher Automatisierung. Legen Sie irgendein Holzstück ab und die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung entsprechend den eingegebenen Zuschnittsaufträgen. Import von Excel-Auftragslisten über WLAN für effiziente Übernahme großer Schneidlisten. Ihre vollautomatische Säge kann optional als Inline-Optimierungssäge geliefert werden. Jedes aufgelegte Holzstück, ungeachtet der Länge, wird von einem Lasersensor vermessen. Unser leistungsfähiger Optimierungsalgorithmus verarbeitet Ihre Zuschnittliste und kalkuliert den optimalen Abschnittsplan, sodass der Verschnitt minimiert wird. Dieser Vorgang erfolgt in Echtzeit während des Maschinenbetriebs, ohne dass ein Eingriff Ihrerseits erforderlich ist. Ausstattung: • Vollautomatischer Schneidbetrieb mit Stangen-/Riegelzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den vollautomatischen Betrieb, Auftrag eingeben und in Sekunden schneiden • Komfortables Schneiden von Einzelteilen, Serien oder umfangreichen Excel-Listen • Bündel-/Mehrfachstangen-Schnitt und automatische Zählfunktion • Remote-Eingabe von Excel-Auftragslisten per WLAN mit umfassenden Datenzuordnungsmöglichkeiten • Vollständig einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile basierend auf den Auftragsdaten (manuelle Etikettenanbringung, optional) • Direktdruck auf das Material während des Durchlaufs ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck/-Scan für Auftragsdatenerfassung (optional) • Automatisierte Servo-Einstellung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkproduktion • Fertigung von Gartenhäusern/Holzhütten • Möbelherstellung • Gehrungs-Holzkonstruktionen • Serienmäßiger Zuschnitt großer Holzvolumina Modell: A550 Schnittlänge: 9 m Materiallänge: 8.580 mm Schubkraft: 20–40 kg Hsdpfef Ekngsx Agxsl Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm Hjdpfsi Dfidex Agxol 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Hsdpfjhp Rcrex Agxel Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Hedpjdqzh Rsfx Agxsl Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Main machine features: The TH 630 thickness planer is a simple, robust design intended for daily workshop use, featuring a planing shaft width of 630 mm. It is equipped with a large, heavy-duty, ribbed cast iron table, which effectively eliminates any vibrations during operation. The machine boasts an exceptionally powerful motor driving the cutterhead (fitted with serrated knives), making the process of planing even the most difficult wooden elements a straightforward task. Each knife can be easily replaced if worn or damaged. Table height adjustment is automatic after entering the required dimensions. These advantages enable highly precise cutting and machining settings. Advantages: - Working table mounted on 4 screws - Controller for automatic table height adjustment - 120 mm cutterhead with 4 knives - Capable of handling large workpieces Hsdpegpg E Sefx Agxsl Technical specifications: - Max planing width: 630 mm - Max planing height: 300 mm - Min length of workpiece: 280 mm - Cutterhead diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630x30x3 mm - Power supply: 400 V - Total power: 7.5 kW - Variable feed speed: 4–20 mm/min - Electric table lifting - Extraction port diameter: 150 mm - Weight: 890 kg - Table dimensions: 1050x630 mm - Cutter block speed: 5,500 rpm Machine available immediately from stock! Machine dimensions: - Length: 1,060 mm - Width: 1,060 mm - Height: 1,160 mm