Kotni sistem

Okoma UF 3 S

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPL 380 Podatki o rezu in dvižni mizi Dolžina reza: 4.300 mm Hfjdpfxsx Nf Eqe Afwjf Velikost reza z dvižno mizo: 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (maks.): 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (min.): 1.200 mm x 400 mm Višine skladov Višina sklada na dvižni mizi ob postavitvi na ravni tal (maks.): 560 mm Višina sklada na dvižni mizi ob postavitvi v jami (maks.): 780 mm Nosilnost dvižne mize (maks.): 4 t Valjčne tirnice Valjčna tirnica, 10-stezna: 1 kos Valjčna tirnica, 2-stezna: 6 kosov Vpenjalne klešče Razmiki: 75/275/475/1.075/1.825/2.625/3.425 mm Odsesovalne in zračne mize Pozicija odlagalne naprave: 2.375 mm Zračna miza z valji 2.160 x 800 mm: 1 kos Zračna miza z valji 2.160 x 650 mm: 3 kosi Centralni ventilator: 1 kos Razvodna cev za zračne mize: 70 x 70 mm

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ Hedjwbil Sepfx Afweff ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An inspection on site is possible. Hfsdsurwy Aopfx Afwjf

Stanje: rabljeno, prevoženi kilometri: 670.110 km, moč: 132 kW (179,47 KM), prva registracija: 09/2008, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 4, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 3.450 mm, Leto izdelave: 2008, Oprema: ABS, dvižna zadnja plošča, * Listing/Vehicle No.: MTG * Office: * WhatsApp: * Email: * Mobile: * Email: * Website: Rental of various trucks, tractor units, and trailers available for short- or long-term lease. 7.5t from €699.00 and 18t from €1,---.00 per month, available at short notice! Contact us for details. 1x MAN TGL 8.180 L Box Truck * Year of manufacture: 09-08 * Export Model 09 * Chassis number: 9Y223XXX * Mileage: 670,--- km * Manual transmission * Euro 4 * BÄR tail lift 1.5t * Leaf/air suspension * Cargo bay length: 8.0m / Interior height: 2,m / Interior width: 2.35m * Cruise control * Multifunction steering wheel * Tires: 265/70 R17.5 * Spare wheel * German vehicle * Excellent tires Net price – Trade-in possible – Rental/financing/leasing brokerage – Subject to changes, prior sale, typographical and factual errors! We deal exclusively in well-maintained German vehicles. Our service: All customs and export documents, Euro 1 * Temporary registration / 5 days Hfedpfx Afoxvai Uowof * Customs plates / 30 days * Vehicle delivery * Vehicle collection * General inspection (TÜV) and safety check Our contact details and opening hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday – Friday: 09:00 – 18:00 * Saturday: by appointment

Stanje: rabljeno, Leto izdelave: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Grinding unit swivels via hand crank - The machine base, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be switched on or off as required Hjdpfowkbcbex Afweff - Sanding shoe with graphite coating for increased sanding belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Auxiliary table for sanding radii, with integrated extraction openings - Spring-loaded belt tension automatically compensates for differences in belt length - Equipped with adjustable stops – ideally suited for veneer sanding - Veneer overhang can be easily sanded down - With chassis for mobility - Oscillation motor power: 0.11 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding area length: 800 mm - Sanding area width: 150 mm - Swiveling range of grinding unit: 0–45° - Working table length: 950 mm - Working table width: 450 mm - Working table height adjustment: 110 mm - Dimensions (L×W×H): 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, 4 hitrosti vrtenja: 3000/4500/6000/9000 obr/min. Desni/levi tek Hfedpfx Afjxwxrqjwjf Krmilna plošča zgoraj Podaljški mize in izvlečna mizna podlaga Motor 4,7/5,7 kW Premer vretena 30 mm Teža pribl. 1000 kg z dovajalno napravo WEGOMA VS 34, 3 valji Stol za čepenje za prečno obdelavo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 5.780 h, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), obratovalni tlak: 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, hladilni sušilnik, Kaeser Compressed Air Complete System - SM 13 + TA 8 + OKS (Otto Klein) For sale is a complete, fully functional compressed air system consisting of: Hfsdpoxwbdvefx Afwof 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit is already equipped with an internal tank and an integrated cooler. In addition, a separate cooler and compressed air receiver, as shown in the pictures, are also included. This means that both the internal equipment is complete and the additional accessories are part of the delivery package. The system has been regularly serviced, is in very good operational condition, and is ready for immediate use. Our service promise: For us, quality, expertise, and customer satisfaction always come first. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you at any time, even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Hfjdpfewgwlkex Afwef Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. Hfjdpst Hxxpsfx Afwef - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle Hfodpfxsh Nvyzj Afwsf -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg