Kotni sistem

OKOMA UF 1 S

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Cedpfx Ajvwdmwefqeaa

Stanje: rabljeno, Leto izdelave: 1985, Teža: cca 3000 kg Dimenzije: cca 3700 x 2000 x 1600 mm Lokacija skladišča: Nattheim Cajdpfxovvi Ttj Afqsa

Stanje: rabljeno, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Article All pressure plates and abutments covered with plastic Caodpeu Uvaljfx Afqoa Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm Cjdpswgwlksfx Afqsaa * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: rabljeno, Number of milling spindles: 2 pcs. Stop: 1 pc. Tool included: yes Cross rail milling machine STEGHERR, model KSF-mini ----- Including stop rail with measuring scale and sliding stop. Including tools. Codpewi Upfofx Afqsaa Special milling machine for efficient production of cross muntin joints. The cross rail milling machine KSF-mini is the result of STEGHERR's extensive experience in the construction of these specialized machines for cross muntin joinery. With the KSF-mini, all types of cross muntin joints commonly found in practice can be produced quickly and with a precise fit. Pre-profiled muntins can also be processed on the KSF-mini. Precise recessing is achieved as the workpiece is processed on three sides in a single clamping operation. The tool drive is provided by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed for the bar width. The saw blades used for notching can be adjusted to the dimensions of the profile cutter using spacers. The machine is suitable for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table stand Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (for bar width 10 mm) Stop rail with measuring scale and sliding stop as shown in the photos. Installation dimensions (approx. LxWxH): 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data as per manufacturer, without guarantee!)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2788, Cross-cut saw diameter: 300 mm Milling spindle diameter: 40 mm Sliding table with FESTO length stop Caodpsiau I Ssfx Afqoa Extraction nozzle saw: 120 mm ditto milling: 140 mm Cable and plug: 16 amp, without operating tools We regret that we cannot respond to enquiries without complete contact details.

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Cajdpsv Tb Hgefx Afqea Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Used window milling machine, fully operational (still in use, can therefore be inspected), cross-cut saw, slot spindle, profile spindle (see photos). Machine available individually or with tooling (complete Leitz IV66 window set upgraded with sash rebate seal, with and without rain rail, IV 78 Aigner profile with and without rain rail). Cedpfowgnn Aex Afqsaa

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 3.800 h, Funkcionalnost: popolnoma funkcionalen, On offer: A robust four-side planing machine from Pinheiro Manufacturer: Pinheiro Model: MF4EEX - 630 Serial number: 5891 Year of manufacture: 1989 Weight: approx. 3,000 kg Operating hours: 3,764 Working width: 630 mm Max. workpiece height: 200 mm Cjdpfowtt Dvjx Afqeaa Spindle speed: approx. 5,500 rpm Bottom spindle motor: approx. 11 kW Top spindle motor: approx. 15 kW Side spindle motors: each approx. 3.5 kW Feed motor: approx. 3 kW Feed speed: approx. 6–30 m/min Spindle diameter: approx. 46 mm Shortest workpiece: approx. 230 mm Min. feed spacing: approx. 400 mm Number of feed rollers: 9 powered rollers Height adjustment: motorized Footprint: approx. 2,200 x 1,450 mm

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle Cjdpfx Ajxpi Dujfqeaa ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).