Sesalni pokal

Nilfisk R104X

Stanje: novo, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Supply voltage: 400 V Weight: 75 kg Nwsdpfx Aeu Aw Shobrjh Dimensions (LxWxH): 950 x 560 x 880 mm Shielded gas welding machine: - with pulse function - 300 Ampere - 400 Volt - 3 m torch hose package - Earth cable - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: Nwsdpfx Abswbknboreh ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Leto izdelave: 1991, Drilling capacity in steel (diameter): 50 mm Throat depth: 1100 mm Max. workpiece height: approx. 1000 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 28 - 2500 rpm Feeds: 0.05 - 2 mm/rev Quill travel: 300 mm Distance base plate to spindle nose: 630 - 1380 mm Vertical arm adjustment: 750 mm Total power requirement: 6 kW Machine weight: approx. 4 t Machine dimensions (L x W x H): 2,740 x 1,140 x 2,590 mm - with tapping device - Accessories: cube table (L x W x H = 550 x 550 x 550 mm), machine vice, coolant system Nwjdsu Sblwspfx Abreh

Leto izdelave: 1985, stanje: dober (rabljeno), Offer 22556 Nwjdpfjimdlrox Abrjh Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Minimum cutting length at 90° and 45°: 335 mm - Cutting range: see attached diagram - Manual swivel range inward: 90° - 22.5° - Manual tilt range inward: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per cycle approx.: 64 l - Space requirements approx.: W 4500 x H 1950 x D 1600 mm - Weight approx.: 1400 kg - With: - Adjustable cutting length with positioning control - Positioning control renewed ca. 2002 by WOLFF - Saw unit can be swiveled and tilted for tall and wide profiles - Also suitable for compound/miter cuts

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Nwjdpfx Asryv S Aebreh Length: 14,250 mm, Width: 8,500 mm, Height: 3,650 mm Maximum hook height: 3,280 mm, Maximum overall height: 3,950 mm.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Unitex 15 Nwsdpfx Aboh H Iyxersh

Stanje: rabljeno, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Nwsdpfsqk U Rrox Abrjh Specification: Model: Bomar 450SL If you have any further questions, we will be happy to answer them.

Leto izdelave: 2000, stanje: delavnici obnovljeno (rabljeno), Stock no.: 2107 1 used, partially overhauled and function-tested strand pelletizer COMAC Model SG-100 SV Strand feed width: 100 mm Cutter rotor width: 110 mm Nsdpfeiyyc Eox Abrjwh Parallel-cut rotor with 32 teeth Rotor diameter: 200 mm >> Adjustable cut length for strand pellets 2 drives: 1x for cutter rotor - 4 kW 1x for feed roller - 1.5 kW with STÖBER reduction gearbox Sound-insulated granulation chamber housing Inspection / test run available soon by appointment. We also have matching strand cooling troughs, strand blowers, and classifying screens available from stock. Further strand pelletizers and other pelletizing systems/plants available from stock (water ring, hot face, and underwater pelletizing).

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 001472U, for sale 1x single-girder overhead travelling crane, 13,685 mm span, with 2 hoists x 2,000 kg each Nwedpfxettax Ss Abroh

Stanje: pripravljen za uporabo (rabljen), Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be tested in our facility in Oberkochen prior to delivery! Technical Data Summary (Please enquire separately for any additional included accessories) Pos. 1: Crosscut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for section identification CNC-controlled length stop ----- Njdpfx Abjxtvgksrewh > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and grooving spindle ----- > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 axially synchronized feed rollers opposite the profiling spindle, for processing narrow, short parts (e.g. muntin bars for glazing) Muntin guide consisting of: Muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, upper ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 52 mm, synchronized to 2 positions > Radial adjustment 125 mm, synchronized to 2 positions Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 90 mm, synchronized to 3 positions > Radial adjustment 100 mm, synchronized to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Electronic feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebate device for splinter-free rebating > Double parts package > Return feed system for single-operator use: swivelling belt > Screen control > Angled window adaptation > Electronic angle display for angled windows > Industrial PC, with Windows PC control/NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1...