Ostala transportna in pogonska tehnika nakup rabljenega (1.405)

Leto izdelave: 2021, Stanje: novo, Največji delovni tlak: 700 bar Kapacitetni razred (nosilnost): 200 t Največja kapaciteta valja pri iztegu (kN): 1995 Hod (mm): 152 Zložena višina A (mm): 430 Raztegnjena višina B (mm): 582 Kodohhfa Tepfx Ah Dsnc Zunanji premer D (mm): 247 Premer cilindra E (mm): 190,5 Premer bata F (mm): 133,4 Razdalja od dna do izhodnega priključka H (mm): 57 Razdalja od vrha do povratnega priključka I (mm): 96 Premer sedla J (mm): 133 Teža (kg): 147

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Comefri TLZ 400 centrifugal fan, double inlet Centrifugal fan TLZ 400, double suction Air delivery: max. 30,000 m³/h Air density: 1.2 kg/m³ Maximum speed: 1,700 rpm Absorbed power: 9 kW Maximum pressure: 1,800 Pa Number of blades: z38 High capacity and efficiency Fan with forward-curved impeller Double inlet for belt drive Impeller with forward-curved, galvanized sheet steel blades Outlet opening: 507x507 mm Knsdpfonwrypjx Ah Doc Shaft diameter: 30 mm

Stanje: rabljeno, Leto izdelave: 2008, skupna masa: 7.500 kg, moč: 15 kW (20,39 KM), Povpraševanja pošljite izključno po e-pošti ali neposredno preko Machineseeker. Knedpsxmfg Hjfx Ah Dec

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Celotna sortirna naprava za žagan les naprodaj! Kjdpexhdqmefx Ah Denc

Stanje: zelo dobro (rabljeno), Maxcess Fife-500 Web Guiding System Electromechanical Web Guiding System with Sensor Manufacturer: Fife Maxcess Kedpfxovcda Io Ah Djnc Type: Fife-500 Web Guiding System (modular assembly) For further technical details, please refer to the nameplate in the attached photos. Otherwise, please heed the following notes or contact us by phone if necessary. Thank you. • Condition: Please see photos. The item was kept as a spare part, originates from the spare parts inventory, or was dismantled from an existing installation. • Further information: Please note that the item may have been previously used. As a result, scratches, stains, discolorations, or remaining wiring may be present. • The item is offered as used, without any guarantee or warranty. • Our items were partially dismantled from operational production lines, or are unused stored goods. • The items have been stored for several years and are expressly offered as “used goods,” even if they saw little to no active service or were kept solely as spare parts. • Variations from the specified technical data and errors in the item description may occur and are reserved. • Condition/packaging as shown in the photos or as mutually agreed. • For further questions or if you require additional photos, please contact us. • For international shipping, please inquire, as shipping costs may vary. • For technical or other inquiries, please feel free to contact us at any time. • Appointments for inspection or personal collection can of course be arranged upon request. If you have questions or would like to schedule an inspection, please contact us. Thank you for your interest.

Leto izdelave: 2025, Stanje: novo,

Stanje: rabljeno, Transportni trak za dovajanje izdelkov na višino 400 cm. Trenutno je bil transporter uporabljen za dovajanje preform v pihalni stroj za PET plastenke, vendar ga je mogoče uporabiti tudi za transport drugih izdelkov na večje višine. Proizvajalec: M. TANNER AG Model: VZT-2000 Višina transporterja: 4300 mm Širina traku: 500 mm Kjdpfxsvzz T Ae Ah Dsnc Teža: 850 kg Vse komponente, ki so del stroja, so vidne na fotografijah. Stanje stroja: rabljeno, potrebno tehničnega pregleda.

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, RNA vibratory feeder with linear conveyor and control unit. Rated vibration frequency: 50 Hz with dual speed regulation Manufacturer: RNA Model: ESK-N80 Bowl diameter: 700 mm Voltage: 220 V, 50 Hz Kedeh S Il Tspfx Ah Djnc Protection class: IP30 Vibration rate: 3000 cycles/min Vibration regulator: RNA Height-adjustable stand + linear dosing unit Length: 1,520 mm

Stanje: dober (rabljeno), For sale here is a used wire hooding machine for sparkling wine bottles from the brand Kematec. Knsdjm Excgspfx Ah Djc

Stanje: dober (rabljeno), High-pressure radial fan, dust extraction blower, exhaust extraction, heating blower, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower - Exhaust air blower - Electric motor: Lammers 400/690 V / 3 kW - Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 - Speed: 3,179 rpm - Airflow rate: 2,160 m³/h Knjdpsff Aq Ajfx Ah Dsc - Inlet connection: Ø 735 mm - Outlet connection: 365 x 310 mm - Dimensions: 1,300 x 740 x H820 mm - Weight: 153 kg

Stanje: novo, Flender gearbox Kedehl H Tpspfx Ah Dsnc Maximum input power: 37 kW Type: H3 HH 7 A N1: 1500 rpm / N2: 33.26 rpm Weight: 520 kg

Stanje: rabljeno, VHS verižni transporter RA1845 Tip: VHS verižni transporter 4340-480-410 Transportna dolžina (FL): 4340 mm Razdalja verig (AK): 410 mm Nazivna/zunanja širina (NB): 480 mm Gradbena višina (BH): 120 mm Obseg dobave: 1x 4340 mm verižni transporter Opcijsko na voljo: Nosilci Bočno vodilo enostransko ali obojestransko Frekvenčni pretvornik Knsdpfett E R Ssx Ah Djc Cene neto, brez DDV, iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno strokovno svetovanje nas kontaktirajte. Pokličite nas ali nam pišite po e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega kontakta. Lep pozdrav ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontaktna oseba za intralogistiko

Stanje: rabljeno, Celinski loputasti ventil (Zellenradschleuse) Znamka: TrennSo Tip: AS 600x1400-6 Delovna širina: cca 1400 mm Kedpfxsxgty Uj Ah Dsnc Rotor s fleksibilnimi, zamenljivimi gumijastimi lopaticami S prostim koncem gredi, brez pogona Stanje: nerabljen

Stanje: rabljeno, PFAFF HSE63 High-Performance Worm Screw Jack Manufacturer: PFAFF Model: HSE63 Max. lifting force: 50 kN Max. load: 50 kN Screw drive torque at max. lifting force: 190 Nm Max. input shaft torque: 168 Nm Screw: M16 Worm gear with oil lubrication Oil capacity: 0.7 l Spindle length: 850 mm Knsdpfeugty Hjx Ah Dec The stated price refers to 1 unit.

Stanje: rabljeno, 🧰 Lastnosti izdelka • Stanje: rabljeno • Barva: rumena • Material: jeklo • Lastna teža: 4-6 kg • Dimenzija 1: 20,5 x 33 x 33,5 cm • Dimenzija 2: 20 x 20 x 31 cm • Dimenzija 3: 28 x 23 x 28 cm • Betonski sidri: 2 kosa vključeni Knedpfexc Ihxsx Ah Doc Preostanek zalog, takoj pripravljen za prevzem, le do razprodaje zalog! 💰 Cena € 15,- neto brez DDV • Količinski popust: na povpraševanje • Stroški dostave: po celotni Evropi na povpraševanje • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možna kadarkoli po dogovoru Stalno na zalogi več kot 5000 tm paletnih regalov različnih proizvajalcev (Spremembe in napake v tehničnih podatkih, informacijah in cenah ter vmesna prodaja so pridržane! Glejte naše Splošne pogoje poslovanja; vse cene brez DDV, franko skladišče.)

Stanje: zelo dobro (rabljeno), Linearni ležaj, linearna tirnica, linearno vodilo, tirnica z valji, z vodilnim vozičkom, vodilna tirnica, ukrivljeno vodilo - Stanje: originalno zapakirano - Proizvajalec: THK, ukrivljeno vodilo z 2 vodilnima vozičkoma - Tip: HCR35A2RR+60/910R - Količina: 11 kosov Knedpfjgt Rdljx Ah Djc - Cena: na kos - Teža: 10,8 kg/kos

Stanje: pripravljen za uporabo (rabljen), Menjalnik Eagle Knjdpfx Aoi A Ap Aeh Doc Redukcija: i = 1 : 85 Dimenzije: 1100 mm x 800 mm x 400 mm Zunanji ležaj: premer 50 mm, s jermenico SPC 400-3 Notranji ležaj: premer 100 mm, z vtičnico

Leto izdelave: 2017, Stanje: dober (rabljeno), Spirala, 3 dovozi in 1 izvoz, višina cca 11 m – rabljena - Cena iz lokacije: 9.500 € (neto) demontirana, zapakirana in naložena! Knodpfsxhgftsx Ah Doc Proizvajalec: bo naknadno sporočen Tip: bo naknadno sporočen Leto izdelave: 2017 Višine etaž bodo naknadno posredovane Z 1., 2. in 3. etaže Picktowerja so bile škatle/kartoni transportirani dol in na višini cca 3 m prestavljeni do sortirnika Višine etaž cca 3,50 m, 7 m in 10,50 m Stanje: dobro Na voljo: od približno sredine novembra 2025 Lokacija: NRW

Leto izdelave: 2023, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22023.0202.1000, Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Frame made of sturdy rectangular profiles Design in stainless steel, material 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, brand Habasit, color white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 – 8 m/min) Including adjustment frame for 5 dispensers from viscotec Adjustment is mainly carried out with profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes if necessary. Each dispenser can be set individually for side adjustment, as well as inclination and in/against the conveying direction. No side guide included Including engineering Including pre-assembly Including dispenser assembly at our facility Including testing at our facility Surface finish: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units in aluminum. 5 bars are transferred from existing conveyor technology onto our conveyor belt. Control cabinet in stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic ON and OFF buttons Display for setting speed in m/min and for configuring delay time for the dispenser start signal Sensors for bar detection (each bar detected individually) Sensors and signals for dispenser start (each dispenser receives its own start signal) Communication interface with company Viscotec Emergency stop currently only wired for our own machine. Including control cabinet construction with 50% reserve capacity Including high-grade sensors (distance photoelectric sensors that can measure and evaluate distance) Including high-performance controller (hardware and software can be upgraded anytime without replacing the main unit) Including HMI (display), approx. 7” Including E-Plan Including program Including testing at our facility (interface test with Viscotec) Knodpfx Ajxch D Hjh Djc Surface finish: control cabinet and sensors entirely in stainless steel with FDA approval.

Stanje: dober (rabljeno), Paletni ovijalec, stroj za spenjanje, pakirni stroj, stroj za trakove, skinpack stroj, stroj za ovijanje s stretch folijo, stroj za stretch folijo, ovijalni valj, nosilec za kartonski valj -Nosilec valja: Ovijalni valj za pakirni stroj -Valj: Ø 148 x 1600 mm Knodpfsxmi H Rsx Ah Doc -Pogon/podstavek: mere glej fotografije -Mere: Ø 148 x 1870 mm -Teža: 38 kg

Stanje: pripravljen za uporabo (rabljen), Radicon polžasti menjalniki Tip: BU 12 Razmerje: 30:1 Kodpfxsi A Awis Ah Donc

Stanje: dober (rabljeno), Paletni ovijalec, povezovalni stroj, stroj za pakiranje, stroj za povezovanje (strapping), skinpack stroj, stretch ovijalec, stroj za stretch folijo, ovijalni valj, nosilec valja za kartonsko tuljavo -Nosilec valja: ovijalni valj za stroj za pakiranje Knjdpfxoxmi H Dj Ah Dsc -Valj: Ø 75 x 1700 mm -Pogonska os/pritrditev: mere glej slike -Mere: Ø 95 x 1880 mm -Teža: 35 kg

Stanje: dober (rabljeno), Stroj za ovijanje palet, stroj za spenjanje, pakirni stroj, stroj za strapping, skinpack stroj, stretch ovijalni stroj, stroj za stretch folijo, ovijalni valj, nosilec valja za kartonsko tulko -Nosilec valja: ovijalni valj za pakirni stroj -Valj: Ø 150 x 2040 mm Kodexmi Hwjpfx Ah Dsnc -Gred: Ø 44 x 330 mm -Pogonsko kolo: Ø 198 mm / mere glej slike -Dimenzije: Ø 200 x 2680 mm -Teža: 50 kg

Stanje: dober (rabljeno), Paletni ovijalec, stroj za povezovanje, pakirni stroj, stroj za trakove, skinpack stroj, stretch ovijalec, stroj za stretch folijo, ovijalna rola, nosilec za rolo, za kartonsko cev -Nosilec za rolo: Ovijalna rola za pakirni stroj -Rola: Ø 75 x 1700 mm -Pogonska gred/nosilec: Mere glej slike -Dimenzije: Ø 95 x 1880 mm Knodpfxsxmi Hko Ah Djc -Teža: 35 kg

Stanje: dober (rabljeno), Paletni ovijalec, stroj za povezovanje, pakirni stroj, stroj za trakove, skin-pack stroj, stretch ovijalni stroj, stroj za stretch folijo, ovijalna rola, nosilec role za kartonsko tuljavo -Nosilec role: ovijalna rola za pakirni stroj -Rola: Ø 75 x 2040 mm -Gred: Ø 44 x 330 mm -Pogonsko kolo: Ø 188 mm / mere glej slike -Dimenzije: Ø 198 x 2760 mm -Teža: 55 kg Knjdpfx Ajxmi E Tsh Dsc