Zrak Kotel nakup rabljenega (1.408)

Stanje: novo, Leto izdelave: 2025, AL-KO Clean Air Dust Extractor Demonstration unit (no operating hours - as new) Lrjdpfx Aebuvbrsbbeg Technical Data Power Unit 250 P: Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: ex stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Description: IE3 motor as standard Maximum airflow up to 8,500 m³/h at the fan Approx. 73 m² filter surface, residual dust content according to H3 Pre-separator as standard 71 dB(A) under full load (according to DIN EN ISO 11201) Already compliant with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested backdraft damper Integrated automatic extinguishing system Inlet diameter: 350 mm Rated motor power: 11 kW Voltage: 400 V / 50 Hz Maximum airflow: 8,500 m³/h Rated airflow: 6,927 m³/h Negative pressure at rated airflow: 2,765 Pa Filter surface area: 73 m² Chip collection volume (net/gross): 3 x 165 l / 3 x 241 l Sound pressure level: 71 dB(A) Dimensions (L x W x H): 3,112 x 1,058 x 2,351 mm Weight: 1,074 kg Ljdpfxecqy I Sj Abberg Location: In stock at 54634 Bitburg

Stanje: rabljeno, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank - Capacity: 11.5 ltr Ljdpfxsd Atx Ej Abbjrg - Permissible operating overpressure: 17 bar - Dimensions: 270/250/H480 mm - Weight: 8 kg

Stanje: rabljeno, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank - Galvanized compressed air vessel - Capacity: approx. 25 l Ledpfxohubdxo Abberg - Dimensions: 630/470/H302 mm - Weight: 14.2 kg

Stanje: rabljeno, Compressed air filter, fine filter, filter, flange filter - Manufacturer: Zander, flange filter type F17 - Filter type: F 17 XA D, 1st stage/filter element 3075 X - Capacity: 20 litres - Operating overpressure: 16 bar - Connection: DN 80 - Price: per unit - Quantity: 2 units - Dimensions: 380/300/H1170 mm Lodpefwg H Aofx Abborg - Weight: 72 kg

Stanje: dober (rabljeno), Compressed air filter, fine filter, filter, flange filter - Manufacturer: Zander, flange filter type F17 - Filter type: F 17 XA D, 2nd stage / filter element 3075 A Lrjdpfxefwnbxj Abbsg - Capacity: 20 litres - Operating overpressure: 16 bar - Connection: DN 80 - Price: per unit - Quantity: 2 pcs. - Dimensions: 380/300/H1170 mm - Weight: 72 kg

Stanje: rabljeno, Compressed air filter, fine filter, filter, flange filter, compressed air microfilter - Manufacturer: Domnick Hunter, compressed air filter Lrodpfx Abjq Av Upjbjg - Type: unfortunately, no exact type designation - Dimensions: see photos - Size: 270/150/H495 mm - Weight: 7 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure boiler, compressor tank, compressed air vessel Lrodpfx Abowwg Aasbjg -Manufacturer: Zeidler & Uhl, upright pressure vessel/vacuum vessel -Capacity: 455 L -Operating pressure: max. 13 bar -Accessories: incl. mounted parts, see photos -Quantity: 1x vessel available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/unit

Leto izdelave: 1996, Stanje: dober (rabljeno), Compressed air breathing apparatus, respiratory protection - 2-cylinder unit - Positive pressure system with: pressure reducer Lrodpfx Absb A H Afebjg - High-pressure gauge - Breathing regulator with: integrated warning device - Thread connection: M 45 x 3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Dvojbobenska spiralna vroča zračna peč neposredno iz zaprte tovarne McDonald's, uporabljena za predkuhanje burgerjev in nuggetsov. Ti stroji so namenjeni visokokapacitetnemu pečenju, žaru in soparjenju najrazličnejših izdelkov; stopnja priprave je določena s temperaturo zraka, hitrostjo zraka, zračno vlažnostjo in časom, ki ga izdelek preživi v sistemu. Električno ogrevana. Trak 96 m x 600 mm. Uporabljena od leta 2007 do 2016, ko se je pogodba preselila v drugo tovarno. Stroj je v odličnem stanju, na voljo imamo tudi vse ostale stroje iz tovarne – oblikovalce, cvrtnike, stroje za paniranje, filtre, spiralne zamrzovalnike, pakirne linije itd. Prosimo, upoštevajte, da fotografije verjetno prikazujejo dve različni peči, obe sta si zelo podobni. Ledpfsx Altfox Abborg

Stanje: dober (rabljeno), Electromechanical actuator for valves, valve actuator, actuator, servo motor, damper actuator, damper motor - Manufacturer: Siemens, damper actuator - Model: SQN70.464A23 - Quantity: 2 units available - Price: per unit Lodsgg Tf Hspfx Abborg - Carton dimensions: 150/100/70 mm - Weight: 0.4 kg per unit

Stanje: zelo dobro (rabljeno), Vitocrossal 620 kW. Kondenzacijski plinski kotel Lrsdpfex I Sq Rox Abbsg

Stanje: rabljeno, Leto izdelave: 1988, Material: nerjavno jeklo 316 L Tlak rezervoarja: 50 psi / približno 3,5 bar Tlak dvojnega plašča: 90 psi / približno 6 bar Temperatura: 300°C Ljdpfxox Rz Tme Abbjrg Vir ogrevanja: zunanji (ni priložen) Premer: 600 mm / Globina: 600 mm Pokrov na tečajih 3 objemne priključke, premer 50 mm 1 temperaturni priključek Skupno odpiranje/zapiranje: 8 sponk Popolno praznjenje Leto: 1988 Mobilna enota: 4 kolesa

Leto izdelave: 2025, Stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator Lrsdomt Dcfspfx Abbsg In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where moist air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer enhances the reliability and durability of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and durability. Key structural components include: 1. Air-to-air heat exchanger In the first stage of the process, incoming air passes through the heat exchanger, where it is pre-cooled by the cooler air exiting the evaporator. The use of a counterflow design allows for efficient heat recovery, increasing the overall energy efficiency of the system. Lrsdpfx Abomt Dcqsbsg 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the condensation of water vapor and oil particles present in the air. 3. Condensate separator After cooling, the air and condensate mixture flows into an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology enables intelligent adjustment of cooling intensity according to actual demand, which reduces energy consumption and increases the service life of the components. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 95 kg Type and amount of refrigerant: R410a, 650 g

Leto izdelave: 2025, Stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Ljdpfx Abomt Dbheborg Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C Lrsdpfx Abovz Hq Tobsg - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h Lodjvz Hq Hopfx Abbsrg - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar Lrsdpfevz Hqyox Abbsg - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % Ljdpfx Aovz Hqtebbjrg - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution. Lrodsvz Hqmspfx Abbeg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Lrodpfx Absvz Hqgsbjg Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h Lrsdpovz Hhxofx Abbjg - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, - User-friendly operating concept - Efficient design for cost-effective and safe operation - Cooling fan with variable speed control from 0–100%, eliminating the need for the conventional pressure switch and thermostat for fan control - Fewer wearing parts while maintaining a constant pressure dew point - Control system displays five different alarm statuses and retains them in memory - Refrigeration compressor shuts off at ambient temperatures below 15°C if there is no compressed air flow - Clear layout and easy access to all maintenance components - Integrated automatic condensate drain Key Advantages at a Glance - High economic efficiency - Excellent price-performance ratio - No unnecessary compressed air losses thanks to the integrated electronic condensate drain - Connected tools and machines are optimally protected - User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and Weights: - Length (product) approx.: 325 mm - Width/Depth (product) approx.: 430 mm - Height (product) approx.: 445 mm Lrodpfou T Hrvex Abbsg - Weight (net) approx.: 24 kg

Stanje: zelo dobro (rabljeno), Viessmann Vitoplex kotel za ogrevanje 150 kW (0069) oljni gorilnik Lredpfx Abjx Htirobog