Zrak Kladivo Kovanje Kladivo nakup rabljenega (1.778)

Leto izdelave: 1980, stanje: pripravljen za uporabo (rabljen), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of manufacture: 1980, operating pressure: 7 bar, test pressure: 9.1 bar, operating temperature: 20°C, medium: compressed air, capacity: 5,300 liters. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15,000 liters, operating pressure: 4 ATÜ, test pressure: 5.2 ATÜ. An on-site inspection is possible. Hnodpfx Adeumwg Eekei

Stanje: novo, Stapler PN 91120 D – Single trigger operation Higher withdrawal values and reduced edge distances compared to round head nails • Ideal for lathing, as it results in less splitting • Versatile due to its large staple length range • Also suitable for structural timber construction Technical details: • Staple width: 11.76 mm • Wire gauge: 2.0 mm • Staple length: 65 to 120 mm • Magazine capacity: 125 staples • Air consumption at 6 bar (approx.): 2.5 l/shot • Weight: 5.1 kg The stapler is new and unused. There may only be slight signs of storage, as the device was on display in our showroom. Hnsdpfsvcmifjx Adkei You will receive an invoice with VAT shown separately. Payment: Advance bank transfer only – NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Hladilni sušilnik s izpustom kondenzata, letnik 12/2020, kapaciteta/volumski pretok: ca. 1,75 m³/min (≈ 105 m³/h / 1050 l/min), tlačna točka rosišča: tipično +3°C (pri referenčnih pogojih), največji delovni tlak: do ca. 14 bar, dimenzije: ca. 255×455×708 mm, teža: ca. 36 kg. Dobro stanje. Cena iz lokacije. Prevoz možen proti doplačilu! Hnedpfx Aeybbggjdkoi

Leto izdelave: 2003, stanje: dober (rabljeno), Vrtalno kladivo, dleteno kladivo, kombinirano kladivo, Boschhammer, udarni vrtalnik, dleteno kladivo, rušilno kladivo, električno kladivo, demolilno kladivo -Proizvajalec: Makita, rušilno kladivo tip HM 1100C s transportnim kovčkom in dletom -Nazivna moč: 1050 W Hedjyhcfqspfx Adksni -Število udarcev: 1300 - 2650 udarcev / min -Dimenzije kovčka: 650/440/H130 mm -Teža: 13,4 kg

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and lifetime of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main construction components include: 1. Air-to-air heat exchanger In the first stage of the process, inlet air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the use of counterflow, heat recovery enhances the overall energy efficiency of the system. 2. Refrigeration system evaporator In the second stage, the compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Flow capacity: 7,000 l/min Power: 1.37 kW Hnsdpfx Adjmt Dcxekei Supply voltage: 230 V Dimensions (L x W x H): 1000 x 550 x 920 mm Weight: 95 kg Refrigerant type and quantity: R410a, 900 g

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the downstream air flow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigerated air dryer is engineered for maximum efficiency and durability. Key design elements include: 1. Air-to-air heat exchanger In the first stage of operation, the inlet air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. The use of a counter-flow setup enhances heat recovery and improves the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This process results in condensation of the water vapor and oil particles contained in the air. 3. Condensate separator After cooling, the gas and condensate mixture is directed to a high-efficiency separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology allows intelligent adjustment of cooling intensity according to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Hnodpfx Adjmt Dcqskji Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 59 kg Refrigerant type and quantity: R410a, 650 g

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. Hjdpfxomt Dbhe Adkoni 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Leto izdelave: 2026, stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. Hjdpfxsmt Dcfs Adkjni The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g

Stanje: dober (rabljeno), Rotary hammer, chisel hammer, combination hammer, Bosch hammer Hodpob A Hxujfx Adkjni - Rated power input: 620 W - Mains connection: 230 V - Drilling - Various drill bits - Carrying case - Weight: 5.5 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Compressed air tank, pressure vessel, pressure tank, air receiver, pressure cylinder, compressor tank - Manufacturer: Maschinen- und Behälterbau, vertical compressed air vessel - Capacity: 3000 l - Operating pressure: 11 bar Hnjdpfx Asphun Eodkoi - Accessories: incl. attached parts, see photos - Dimensions: Ø 1475 x 2760 mm - Weight: 700 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, Air-operated airless pump on pump trolley The T2001 piston pumps are robustly designed, air-operated airless pumps developed for delivering, transferring, and spray painting with multiple guns. All wetted parts are made of stainless steel, hard metal, PTFE, or PE. An ATEX certification for use in hazardous (explosive) areas completes the package and makes these pumps highly versatile. Below are the key advantages at a glance: - Minimal pulsation for consistent material flow during conveying and spraying - Versatile application due to the use of stainless steel, hard metal, PTFE, or PE in wetted parts - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve according to accident prevention regulations - Portable versions available on pump trolley - ATEX certification Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Model: T2001-60.135 Max. material flow rate: 9.0 l/min Suction height (empty pump): 1.5 mWS Suction height (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Max. stroke frequency (short-term): 50 DH/min Max. stroke frequency (continuous): 20 DH/min Max. material overpressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Permissible operating pressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air inlet: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number: 8424 8970 Year: 2001 New price €13,600 incl. VAT. Financing through our bank is also available. komplett-konzept.leasingo.de Additional items in other sizes—new and used—available in our shop! International shipping costs on request! Hnjdpjrt Uy Nsfx Adksi

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm - NEW - Hnedpevxa Itsfx Adksi Kanuk Turbo 2 *new design* Hot air furnace incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Hjdpfx Adovwf Rkekoni Flue gas temperature (°C): 216 Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Stanje: kot nova (razstavni stroj), Hammer mill Hedebxadnjpfx Adkoni Manufacturer: Neue Herbold Model: HM 450/300 Drive: 18.5 kW - Demonstration machine / pilot plant machine - Suitable for the size reduction of brittle plastics, electronic waste, wood waste, and insulation material waste (mineral wool, glass wool, stone wool).

Stanje: delavnici obnovljeno (rabljeno), Vijačne stopnje kompresorjev Atlas Copco, Kaeser - AIREND SIGMA - 1,2,3,4 SIGMA - 12 SIGMA - 175, 170, 18, 19, 26, 27, 28, 290, 292, 293, 33, 37 OIS-H03 OIS-H06 OIS-J01 OIS-K03 OIS-K13 OIS-K14 OIS-K15 OIS-K25 OIS-K26 OIS-K36 OIS-L03 OIS-L06 OIS-M01 OIS-M05 - C146 OIS-M08 OIS-N01 OIS-N02 OIS-O01 OIS-O05 Hsdpoxy Aaqofx Adksni OIS-Q01 C146 C190 C111

Stanje: rabljeno, Leto izdelave: 2009, Overview This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system comprises two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerant dryer, and one Donaldson UFA-AC0016 oil separator. Designed for reliable and energy-efficient air supply with up to 8.5 bar, this system is ideal for continuous production environments. The system has been regularly serviced, with the most recent comprehensive maintenance completed in August 2025, and is in good operating condition. The entire installation remains connected and operational and is available immediately for inspection and sale. Technical specifications - Year of manufacture: 2009 - 2013 - Application: Industrial compressed air system - Total capacity: 2 × 24.1 m³/min - Maximum pressure: 8.5 bar - Power consumption: 274.8 kW Scope of supply - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Refrigerant dryer | Atlas Copco | FD160 VSD | 2012 Hnjdpfjxrc Acex Adksi - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Leto izdelave: 2024, stanje: novo, For sale: WLO 20 kW Warm Air Furnace, Workshop Stove, Wood Stove, Hall Furnace Technical Specifications of the Stove Nominal heating output: 20.00 kW Maximum heating output: 23.00 kW / approx. 230 m² Included: high-performance axial fan, speed: 1380 rpm, capacity: 2910 m³/h Set includes: driver Innovative air jacket design fully encasing the stove for maximum efficiency Indestructible combustion chamber made of 5 mm thick boiler steel Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Stove lining: 12 fireclay bricks Interchangeable large cast iron grate Coated with certified heat-resistant paint that protects against corrosion and provides an attractive appearance Robust construction Large combustion chamber Large loading door User manual included Hnedpfxoixun Ts Adkji Efficiency: 75.00% CO emissions at 13% O₂: 1.20 m Fuel type: recommended seasoned hardwood with a moisture content ≤20%, briquettes, coal only as an additive up to 10% Safety and Certifications CE marking: YES / indicated on the nameplate Compliance with standard: EN13240: 2006 BimSchV Stage 2: Yes Dimensions External dimensions: Total width: 485 mm x Total depth: 790 mm x Total height: 1030 mm Firebox dimensions: Width: 380 mm x Depth: 450 mm x Height: 500 mm Upper door dimensions (3 and 4 mm sheet metal): Width: 365 mm x Height: 215 mm Lower door dimensions (3 and 4 mm sheet metal): Width: 365 mm x Height: 295 mm Upper loading opening: Width: 285 mm x Height: 195 mm Lower loading opening: Width: 285 mm x Height: 265 mm Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm Hot air outlet diameter: Ø 120 mm Exhaust outlet diameter: Ø 130 mm Leg height: 140 mm Fan Technical Specifications Fan type: Axial blower Material: Steel (impeller + housing) Diameter: Ø 300 mm Power supply: 230V / 50Hz Motor: 4-pole Current draw: 0.30 A Speed: 1380 rpm Air flow: 2910 m³/h Safety: CE mark + protective grille

Leto izdelave: 2024, stanje: novo, FOR SALE: New WLO 50 KW Hot Air Furnace, Workshop Stove, Wood Stove Technical Specifications of the Furnace - Nominal heating output: 44.50 kW - Maximum heating output: 50.00 kW / approx. 300 m² - Included in set: powerful axial fan, speed: 1350 rpm, airflow: 5060 m³/h - Included in set: driver/controller - Innovative air jacket design completely encases the furnace for maximum efficiency - Indestructible furnace made entirely from certified P265GH and 16Mo3 boiler steel sheets, thicknesses #6mm and #10mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 330 kg - Gross weight: 340 kg - Furnace lining: 40 fireclay bricks - Two large removable cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appearance - Heavy-duty construction - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00 % - CO emission at 13% O₂: 1.20 m - Recommended fuel: seasoned hardwood with moisture content ≤ 20%, briquettes, coal only as an additive up to max. 10% Hnsdsixup Ajpfx Adkei Safety and Certifications - CE marking: YES / included on the type plate - Conformity to standard: EN13240: 2006 - BimSchV Stage 2: Yes Dimensions - External dimensions: total width: 580 mm x total depth: 1290 mm x total height: 1310 mm - Firebox dimensions: width: 480 mm x depth: 930 mm x height: 680 mm - Upper door dimensions (3 & 4 mm steel): width: 390 mm x height: 330 mm - Middle door dimensions (3 & 4 mm steel): width: 390 mm x height: 150 mm - Lower door dimensions (3 & 4 mm steel): width: 390 mm x height: 150 mm - Upper loading opening: width: 315 mm x height: 310 mm - Middle/bottom loading opening: width: 315 mm x height: 130 mm - Cast grate dimensions: width: 210 mm x depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Specifications - Fan type: axial blower - Material: steel (impeller + housing) - Diameter: Ø 450 mm - Power supply: 230V / 50Hz - Motor: 4P - Current draw: 0.82A - Speed: 1350 rpm - Airflow: 5060 m³/h - Safety: CE mark + protection grid

Leto izdelave: 2024, stanje: novo, For sale: New WLO -15 KW Warm Air Heater, Workshop Stove, Wood-burning Stove Technical Parameters of the Stove: Nominal heating output: 12.00 kW Maximum heating output: 15.00 kW / approx. 150 m² Includes: Forced axial fan with speed: 1400 rpm and capacity: 1460 m³/h Innovative air jacket design completely surrounds the stove for maximum efficiency Extremely durable stove made entirely from P265GH and 16Mo3 certified boiler plate steel, thicknesses: 6mm and 10mm Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg Interchangeable large cast iron grate Coated with certified heat-resistant paint to provide corrosion protection and an aesthetic finish Heavy-duty construction Large combustion chamber Large loading door User manual included Efficiency: 75.00 % CO emission at 13 % O₂: 1.20 mg/Nm³ Recommended fuel type: Seasoned hardwood with moisture content ≤20%, briquettes, coal only as an additive up to 10 % Safety and Certifications: CE marking: YES / marked on the nameplate Hnsdpfx Adoixul Hokji Standard compliance: EN13240: 2006 BimSchV Stage 2: Yes Technical Parameters of the Fan: Type: Axial fan Material: Steel (impeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Motor: 4 pole Current consumption: 0.30A Speed: 1400 rpm Airflow: 1460 m³/h Safety: CE marking + protective mesh

Leto izdelave: 2023, stanje: novo, For sale: NEW WLO Octagon 49.5 kW Hot Air Furnace - Workshop Heater, Wood Stove, Industrial Space Heater Thanks to its powerful combustion chamber, this stove can accommodate logs up to 120 cm in length! Technical Specifications: - Rated thermal output: 49.5 kW (suitable for approx. 450 m²) - Includes: Axial fan with 1380 rpm and capacity: 5500 m³/h - Supplied with: Controller for operation of SCL-1515 fan Hnedpfx Aeixuq Dodkei - Innovative air jacket design fully surrounds the stove for maximum efficiency - Indestructible construction – entirely made from certified boiler plate steel P265GH & 16Mo6, thickness: 6 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 320 kg | Gross weight: 340 kg - Grate size: 1000 x 250 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appeal - Heavy-duty construction - Massive combustion chamber: 120 x 80 cm! - Large loading door - User manual included - Efficiency: 75.00% - CO emissions at 13% O2: 1.20 m mg/Nm³ - Recommended fuel: Seasoned hardwood with ≤20% moisture, briquettes, coal only as an admixture up to 10% Safety and Certifications: - CE marking: YES / attached to type plate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External: Width: 800 mm x Depth: 1600 mm x Height: 1200 mm - Stove body: Width: 800 mm x Length: 1200 mm x Height: 800 mm - Upper door (3 & 4 mm steel): Width: 520 mm x Height: 470 mm - Lower door (3 & 4 mm steel): Width: 360 mm x Height: 150 mm - Upper loading opening: Width: 460 mm x Height: 460 mm - Lower opening: Width: 360 mm x Height: 130 mm - Grate: Width: 250 mm x Depth: 1000 mm - Hot air outlet diameter: Ø 150 mm - Flue outlet diameter: Ø 200 mm - Leg height: 140 mm For further information or to arrange a viewing, please contact us.

Leto izdelave: 2023, stanje: novo, For sale: WLO 25 kW hot air furnace, workshop stove, wood stove, hall heater Technical specifications of the stove • Rated heating output: 25.00 kW • Maximum heating output: 30.00 kW / approx. 300 m² • Included: forced axial fan, speed: 1400 rpm, capacity: 3110 m³/h Hjdpfoixupmox Adksni • Included in set: driver • Innovative air jacket design completely surrounds the unit for maximum efficiency • Indestructible furnace made entirely from P265GH and 16Mo6 certified boiler plates, thicknesses #6mm and #10mm • Large exhaust deflector reduces fuel consumption by up to 30% • Energy efficiency class: A • Energy efficiency index: 110 • Net weight: 230 kg • Gross weight: 240 kg • Furnace lining: 15 chamotte bricks • Two removable large cast iron grates 300 x 200 mm • Coated with certified heat-resistant paint for corrosion protection and an aesthetic appearance • Heavy-duty construction • Large combustion chamber • Large loading door • User manual • Efficiency: 75% • CO emission at 13% O₂: 1.20m • Fuel type: recommended dry hardwood with a moisture content ≤20% * mg/Nm³; briquettes, coal permissible as admixture up to 10% Safety and certifications • CE marking: YES / on type plate • Compliance with standard: EN13240:2006 • BImSchV Stage 2: Yes Dimensions • External dimensions: Total width: 485 mm x total depth: 900 mm x total height: 1310 mm • Hearth dimensions: Width: 390 mm x depth: 460 mm x height: 540 mm • Upper door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 230 mm • Middle door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 155 mm • Lower door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 150 mm • Upper loading opening: Width: 310 mm x height: 210 mm • Middle/bottom loading opening: Width: 310 mm x height: 130 mm • Cast iron grate dimensions: Width: 210 mm x depth: 300 mm • Hot air outlet diameter: Ø 150 mm • Exhaust outlet diameter: Ø 130 mm • Leg height: 140 mm Technical specifications of the fan • Fan type: Axial blower • Material: Steel (propeller + housing) • Diameter: Ø 350 mm • Power supply: 230V / 50Hz • Motor: 4P • Current consumption: 0.58 A • Speed: 1400 rpm • Airflow: 3110 m³/h • Safety: CE mark + protection grid

Leto izdelave: 2023, stanje: novo, For sale: New WLO 4 35 kW Warm Air Heater, Workshop Stove, Wood Stove, Hall Heater Technical Specifications of the Heater Nominal heating capacity: 30.00 kW Maximum heating capacity: 35.00 kW / approx. 300 m2 Hnsdpfxoixupuo Adksi Included: powerful axial fan, fan speed: 1350 rpm, capacity: 3500 m3/h Included: Fan controller Innovative air jacket design completely surrounds the stove for maximum efficiency Robust construction, entirely made of P265GH and 16Mo6 certified boiler steel plates, thicknesses #6mm and #10mm Large flue deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Firebox lining: 28 refractory firebricks Removable two large cast iron grates 300 x 200 mm Coated with certified heat-resistant paint for corrosion protection and attractive appearance Heavy-duty structure Large combustion chamber Large loading door User manual Efficiency: 75.00% CO emission at 13% O2: 1.20 mg/Nm3 Fuel type: recommended seasoned hardwood with moisture content ≤20%, briquettes, coal only as an additive up to 10% Safety and Certifications CE marking: YES / on the type plate Conformity to standard: EN13240:2006 BimSchV Stage 2: Yes Dimensions External dimensions: Total width: 580 mm x Total depth: 950 mm x Total height: 1310 mm Firebox dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm Upper door dimensions (3 and 4 mm sheet): Width: 390 mm x Height: 230 mm Middle door dimensions (3- and 4-mm sheet): Width: 390 mm x Height: 155 mm Lower door dimensions (3- and 4-mm sheet): Width: 390 mm x Height: 150 mm Upper loading opening dimensions: Width: 310 mm x Height: 210 mm Middle and lower loading opening dimensions: Width: 310 mm x Height: 130 mm Cast grate dimensions: Width: 210 mm x Depth: 300 mm Hot air outlet diameter: Ø150 mm Exhaust outlet diameter: Ø150 mm Leg height: 140 mm Technical Specifications of the Fan Fan type: Axial fan Material: Steel (impeller + housing) Diameter: Ø400 mm Power supply: 230V / 50Hz Motor: 4P Current consumption: 0.82 A Speed: 1350 rpm Airflow: 3500 m3/h Safety: CE mark + protective grid

Stanje: rabljeno, Leto izdelave: 1997, Technical Details: Capacity: 500 L Operating pressure: 11 bar Hnodpfx Aeu Nz S Eedksi Machine weight approx.: 0.23 t Dimensions (L x W x H): Ø 620 mm x 1800 mm Pressure vessel according to Directive 87/404/EEC Certification mark: TÜV NORD 2017 Mounted on support frame = welded steel profile frame. Connection nozzles: 1/2" with shut-off valve; 1/2" with plug; 1" with pressure gauge; 1" with plug Connection nozzles 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support Pressure hose (internal Ø 20mm), length 4m Pressure regulator with adjustable dual connection

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Tank capacity: 150 l Operating pressure: 11 bar Dimensions L x W x H: Ø 550 mm x H: 1.2 m Weight: approx. 60 kg For sale as is and as described, as a non-pressurized vessel for a listed price. Condensate drain valve at the bottom with manual lever 2 pcs. 1/2" connection nipples 2 pcs. 2" ceiling-side connection nipples with blanking plugs Tank/vessel Ø 450 x 1000 mm, vertical, mounted on tripod stand Temperature max. +50°C / min. 10°C Hnsdeu Nz Tiopfx Adkei Pressure gauge

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.715 mm, skupna širina: 735 mm, skupna dolžina: 1.475 mm, moč: 3,3 kW (4,49 KM), skupna masa: 3.300 kg, Kovaško kladivo je v odličnem stanju in se lahko kadarkoli preveri pod električno napetostjo. Nazivna masa padajočih delov, kg: 75 Energija udarca, kJ: 1,4 Maksimalno število udarcev na minuto: 210 Delovna višina, mm: 300 Dimenzija odtisa v matrici, mm: 130 x 63 Hnedoxwuv Ejpfx Adkji Moč motorja, kW: 3,3 Dimenzije kladiva, mm: 1475 x 735 x 1715 Teža kladiva z nakovalom, kg: 3300